main
History Download
Ray Publish 0.1.0 41efa98

NCS2252SN2T1G

onsemi · Comparators · TSOP-5

NCS2252SN2T1G from onsemi, in a TSOP-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT output Open-drain comparator output on the NCS2252, which requires an external pull-up resistor that may connect to voltages below VDD or up to VDD + 0.3 V.
2 VSS power_in Negative supply pin; connect to ground or negative rail, with a bypass capacitor of at least 0.1 μF close to the pin if not connected to ground.
3 IN+ input Non-inverting input with rail-to-rail common mode range from VSS − 0.2 V to VDD + 0.2 V.
4 IN− input Inverting input with rail-to-rail common mode range from VSS − 0.2 V to VDD + 0.2 V.
5 VDD power_in Positive supply pin (1.8 V to 5.5 V); connect to positive rail with a bypass capacitor of at least 0.1 μF as close as possible to the pin.

Key specifications

Parameter Value
Manufacturer onsemi
Package TSOP-5
Category Amplifiers
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage Range VS 0 6 V VDD - VSS 3
Input Voltage Range VIN -0.3 0.3 V VSS - 0.3 to VDD + 0.3 (relative to rails) 3
Maximum Junction Temperature TJ(max) 150 °C 3
Storage Temperature Range Tstg -65 150 °C 3
ESD Human Body Model HBM 2000 V 3
ESD Machine Model MM 50 V 3
Latch-up Current ILU 100 mA 3
Junction-to-Ambient Thermal Resistance θJA 150 °C/W TSOP-5 (SOT23-5), single layer board 3
Power Supply Voltage VS 1.8 5.5 V 3
Ambient Temperature TA -40 125 °C 3
Quiescent Supply Current IDD 150 200 μA VDD = 5 V, No load; 250 over -40 to 125°C 4
Quiescent Supply Current (full temp) IDD 250 μA VDD = 5 V, No load, TA = -40°C to 125°C 4
Power Supply Rejection Ratio PSRR 62.5 88 dB VDD = 5 V 4
Input Offset Voltage VOS 0.5 6 mV VDD = 5 V 4
Input Bias Current IIB 20 1000 pA VDD = 5 V 4
Input Offset Current IOS 20 1000 pA VDD = 5 V 4
Common Mode Rejection Ratio CMRR 59 81 dB VDD = 5 V 4
Output Voltage Low VOL 0.09 0.3 V VDD = 5 V, IOUT = 4 mA; VSS + value 4
Output Leakage Current ILEAK 1 nA NCS2252, VS = 5.5 V 4
Propagation Delay tpHL tpHL 50 64 ns NCS2252, VDD = 5 V, VOD = 100 mV 4
Propagation Delay tpHL tpHL 60 ns NCS2252, VDD = 5 V, VOD = 50 mV 4
Propagation Delay tpHL tpHL 90 ns NCS2252, VDD = 5 V, VOD = 20 mV 4
Quiescent Supply Current IDD 145 200 μA VDD = 1.8 V, No load 5
Quiescent Supply Current (full temp) IDD 250 μA VDD = 1.8 V, No load, TA = -40°C to 125°C 5
Power Supply Rejection Ratio PSRR 62.5 82 dB VDD = 1.8 V 5
Input Offset Voltage VOS 0.5 6 mV VDD = 1.8 V 5
Input Bias Current IIB 20 1000 pA VDD = 1.8 V 5
Input Offset Current IOS 20 1000 pA VDD = 1.8 V 5
Common Mode Rejection Ratio CMRR 55 76 dB VDD = 1.8 V 5
Output Voltage Low VOL 0.12 0.3 V VDD = 1.8 V, IOUT = 4 mA; VSS + value 5
Output Leakage Current ILEAK 1 nA NCS2252, VS = 5.5 V 5
Propagation Delay tpHL tpHL 56 68 ns NCS2252, VDD = 1.8 V, VOD = 100 mV 5
Propagation Delay tpHL tpHL 71 ns NCS2252, VDD = 1.8 V, VOD = 50 mV 5
Propagation Delay tpHL tpHL 106 ns NCS2252, VDD = 1.8 V, VOD = 20 mV 5

CAD (KiCad official)

  • Symbol: NCS2252SN2T1G
  • Footprint: Package_SO:TSOP-5_1.65x3.05mm_P0.95mm
  • 3D model: TSOP-5 (KiCad packages3D, STEP)
  • 3D model files: ncs2252sn2t1g-etched.step / ncs2252sn2t1g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ncs2252sn2t1g.step / ncs2252sn2t1g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet, copy hosted by DigiKey (12 pp, sha256 5600ff2f6674ceda, retrieved 2026-11-20)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF