main
Ray
ncs2202sq2t2g: specified limits as data (metadata.characteristics, 20 rows from the datasheet)
d1df177
NCS2202SQ2T2G
onsemi · Comparators · SC-70-5
NCS2202SQ2T2G from onsemi, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Output | output | Open-drain comparator output. Requires an external pull-up resistor to a supply up to 6.0 V max. Sinks up to ~5 mA (VOL <= VEE + 0.2 V at Isink = 5 mA, VCC = 6.0 V). |
| 2 | VEE | power_in | Negative supply / ground reference. Typically tied to 0 V; the (VCC - VEE) supply range is 0.85 V to 6.0 V. |
| 3 | IN+ | input | Non-inverting comparator input. Rail-to-rail input; common-mode range extends from VEE to VCC (with ~0.1 V of headroom beyond each rail without phase inversion). Input bias current ~1 pA typical at 25 C. |
| 4 | IN- | input | Inverting comparator input. Rail-to-rail input; common-mode range extends from VEE to VCC (with ~0.1 V of headroom beyond each rail without phase inversion). Input bias current ~1 pA typical at 25 C. |
| 5 | VCC | power_in | Positive supply. Operating range 0.85 V to 6.0 V (relative to VEE). Absolute maximum supply (VCC - VEE) = 6.0 V. Supply current typ. 10 uA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SC-70-5 |
| Category | Op-amp/Cmp |
| Pins | 5 |
Ordering variants
NCS2202SQ2T2GNCS2202SQ2T2GSQ1T2GNCS2202SQ2T2GSN1T1GNCS2202SQ2T2GSN2T1GNCS2202SQ2T2GAMUTBG
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Hysteresis | VHYS | 2 | 8 | 20 | mV | TA = 25°C | 5 |
| Input Offset Voltage | VIO | -10 | 0.5 | 10 | mV | VCC = 0.85 V, TA = 25°C | 5 |
| Input Offset Voltage | VIO | -12 | 0.5 | 12 | mV | VCC = 0.85 V, TA = TLow to THigh (Note 7) | 5 |
| Input Offset Voltage | VIO | -6 | 0.5 | 6 | mV | VCC = 3.0 V, TA = 25°C | 5 |
| Input Offset Voltage | VIO | -8 | 0.5 | 8 | mV | VCC = 3.0 V, TA = TLow to THigh | 5 |
| Input Offset Voltage | VIO | -5 | 0.5 | 5 | mV | VCC = 6.0 V, TA = 25°C | 5 |
| Input Offset Voltage | VIO | -7 | 0.5 | 7 | mV | VCC = 6.0 V, TA = TLow to THigh | 5 |
| Common Mode Rejection Ratio | CMRR | 53 | 65 | dB | VCM = VCC | 5 | |
| Power Supply Rejection Ratio | PSRR | 45 | 55 | dB | VS = 2.575 V | 5 | |
| Supply Current | ICC | 10 | 15 | µA | VCC = 0.85 V, TA = 25°C | 5 | |
| Supply Current | ICC | 10 | 17 | µA | VCC = 0.85 V, TA = TLow to THigh (Note 7) | 5 | |
| Supply Voltage Range (VCC to VEE) | VCC | 0.85 | 6 | V | VEE = 0 V; electrical characteristics header range | 5 | |
| Supply Voltage Range (VCC to VEE) | VS | 6 | V | 3 | |||
| Non-inverting/Inverting Input to VEE | VCM | -0.2 | V | Upper limit printed as (VCC + 0.2); not numeric, see review_required | 3 | ||
| Operating Ambient Temperature Range (NCS2202) | TA | -40 | 105 | °C | NCS2202 (non-NCV); NCV2202 is -40 to +125 °C | 3 | |
| Operating Junction Temperature | TJ | 150 | °C | 3 | |||
| Storage Temperature Range | Tstg | -65 | 150 | °C | 3 | ||
| ESD Tolerance, Human Body Model (NCS2202) | HBM | 2000 | V | NCS2202 all pins | 3 | ||
| ESD Tolerance, Machine Model (NCS2202) | MM | 200 | V | NCS2202 | 3 | ||
| Thermal Resistance, Junction-to-Ambient (SC70-5) | RθJA | 283 | °C/W | SC70-5 package | 3 |
CAD (KiCad official)
- Symbol:
NCS2202SQ2T2G - Footprint:
Package_TO_SOT_SMD:SOT-353_SC-70-5 - 3D model: SC-70-5 (KiCad packages3D, STEP)
- 3D model files:
ncs2202sq2t2g-etched.step/ncs2202sq2t2g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ncs2202sq2t2g.step/ncs2202sq2t2g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (None pp, sha256
83baa340d578bf08, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# NCS2202SQ2T2G
**onsemi** · Comparators · SC-70-5
NCS2202SQ2T2G from onsemi, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Output | output | Open-drain comparator output. Requires an external pull-up resistor to a supply up to 6.0 V max. Sinks up to ~5 mA (VOL <= VEE + 0.2 V at Isink = 5 mA, VCC = 6.0 V). |
| 2 | VEE | power_in | Negative supply / ground reference. Typically tied to 0 V; the (VCC - VEE) supply range is 0.85 V to 6.0 V. |
| 3 | IN+ | input | Non-inverting comparator input. Rail-to-rail input; common-mode range extends from VEE to VCC (with ~0.1 V of headroom beyond each rail without phase inversion). Input bias current ~1 pA typical at 25 C. |
| 4 | IN- | input | Inverting comparator input. Rail-to-rail input; common-mode range extends from VEE to VCC (with ~0.1 V of headroom beyond each rail without phase inversion). Input bias current ~1 pA typical at 25 C. |
| 5 | VCC | power_in | Positive supply. Operating range 0.85 V to 6.0 V (relative to VEE). Absolute maximum supply (VCC - VEE) = 6.0 V. Supply current typ. 10 uA. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SC-70-5 |
| Category | Op-amp/Cmp |
| Pins | 5 |
## Ordering variants
- `NCS2202SQ2T2G`
- `NCS2202SQ2T2GSQ1T2G`
- `NCS2202SQ2T2GSN1T1G`
- `NCS2202SQ2T2GSN2T1G`
- `NCS2202SQ2T2GAMUTBG`
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Hysteresis | VHYS | 2 | 8 | 20 | mV | TA = 25°C | 5 |
| Input Offset Voltage | VIO | -10 | 0.5 | 10 | mV | VCC = 0.85 V, TA = 25°C | 5 |
| Input Offset Voltage | VIO | -12 | 0.5 | 12 | mV | VCC = 0.85 V, TA = TLow to THigh (Note 7) | 5 |
| Input Offset Voltage | VIO | -6 | 0.5 | 6 | mV | VCC = 3.0 V, TA = 25°C | 5 |
| Input Offset Voltage | VIO | -8 | 0.5 | 8 | mV | VCC = 3.0 V, TA = TLow to THigh | 5 |
| Input Offset Voltage | VIO | -5 | 0.5 | 5 | mV | VCC = 6.0 V, TA = 25°C | 5 |
| Input Offset Voltage | VIO | -7 | 0.5 | 7 | mV | VCC = 6.0 V, TA = TLow to THigh | 5 |
| Common Mode Rejection Ratio | CMRR | 53 | 65 | | dB | VCM = VCC | 5 |
| Power Supply Rejection Ratio | PSRR | 45 | 55 | | dB | VS = 2.575 V | 5 |
| Supply Current | ICC | | 10 | 15 | µA | VCC = 0.85 V, TA = 25°C | 5 |
| Supply Current | ICC | | 10 | 17 | µA | VCC = 0.85 V, TA = TLow to THigh (Note 7) | 5 |
| Supply Voltage Range (VCC to VEE) | VCC | 0.85 | | 6 | V | VEE = 0 V; electrical characteristics header range | 5 |
| Supply Voltage Range (VCC to VEE) | VS | | | 6 | V | | 3 |
| Non-inverting/Inverting Input to VEE | VCM | -0.2 | | | V | Upper limit printed as (VCC + 0.2); not numeric, see review_required | 3 |
| Operating Ambient Temperature Range (NCS2202) | TA | -40 | | 105 | °C | NCS2202 (non-NCV); NCV2202 is -40 to +125 °C | 3 |
| Operating Junction Temperature | TJ | | | 150 | °C | | 3 |
| Storage Temperature Range | Tstg | -65 | | 150 | °C | | 3 |
| ESD Tolerance, Human Body Model (NCS2202) | HBM | 2000 | | | V | NCS2202 all pins | 3 |
| ESD Tolerance, Machine Model (NCS2202) | MM | 200 | | | V | NCS2202 | 3 |
| Thermal Resistance, Junction-to-Ambient (SC70-5) | RθJA | | 283 | | °C/W | SC70-5 package | 3 |
## CAD (KiCad official)
- Symbol: `NCS2202SQ2T2G`
- Footprint: `Package_TO_SOT_SMD:SOT-353_SC-70-5`
- 3D model: SC-70-5 (KiCad packages3D, STEP)
- 3D model files: `ncs2202sq2t2g-etched.step` / `ncs2202sq2t2g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ncs2202sq2t2g.step` / `ncs2202sq2t2g.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/ncs2202sq2t2-d.pdf) (None pp, sha256 `83baa340d578bf08`, retrieved 2026-08-17, tier: manufacturer)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ncs2202sq2t2g-datasheet.pdf)