main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs ncs2202sq2t2g: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers ncs2202sq2t2g: viewers · Ray
ncs2202sq2t2g-etched.fit.json ncs2202sq2t2g: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ncs2202sq2t2g-etched.glb ncs2202sq2t2g: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC bo… · Ray
ncs2202sq2t2g-etched.step ncs2202sq2t2g: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC bo… · Ray
ncs2202sq2t2g.glb Publish 0.1.0 · Ray
ncs2202sq2t2g.kicad_mod Publish 0.1.0 · Ray
ncs2202sq2t2g.kicad_sym Publish 0.1.0 · Ray
ncs2202sq2t2g.lbr Publish 0.1.0 · Ray
ncs2202sq2t2g.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md ncs2202sq2t2g: specified limits as data (metadata.characteristics, 20 rows from the datasheet) · Ray

NCS2202SQ2T2G

onsemi · Comparators · SC-70-5

NCS2202SQ2T2G from onsemi, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Output output Open-drain comparator output. Requires an external pull-up resistor to a supply up to 6.0 V max. Sinks up to ~5 mA (VOL <= VEE + 0.2 V at Isink = 5 mA, VCC = 6.0 V).
2 VEE power_in Negative supply / ground reference. Typically tied to 0 V; the (VCC - VEE) supply range is 0.85 V to 6.0 V.
3 IN+ input Non-inverting comparator input. Rail-to-rail input; common-mode range extends from VEE to VCC (with ~0.1 V of headroom beyond each rail without phase inversion). Input bias current ~1 pA typical at 25 C.
4 IN- input Inverting comparator input. Rail-to-rail input; common-mode range extends from VEE to VCC (with ~0.1 V of headroom beyond each rail without phase inversion). Input bias current ~1 pA typical at 25 C.
5 VCC power_in Positive supply. Operating range 0.85 V to 6.0 V (relative to VEE). Absolute maximum supply (VCC - VEE) = 6.0 V. Supply current typ. 10 uA.

Key specifications

Parameter Value
Manufacturer onsemi
Package SC-70-5
Category Op-amp/Cmp
Pins 5

Ordering variants

  • NCS2202SQ2T2G
  • NCS2202SQ2T2GSQ1T2G
  • NCS2202SQ2T2GSN1T1G
  • NCS2202SQ2T2GSN2T1G
  • NCS2202SQ2T2GAMUTBG

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Hysteresis VHYS 2 8 20 mV TA = 25°C 5
Input Offset Voltage VIO -10 0.5 10 mV VCC = 0.85 V, TA = 25°C 5
Input Offset Voltage VIO -12 0.5 12 mV VCC = 0.85 V, TA = TLow to THigh (Note 7) 5
Input Offset Voltage VIO -6 0.5 6 mV VCC = 3.0 V, TA = 25°C 5
Input Offset Voltage VIO -8 0.5 8 mV VCC = 3.0 V, TA = TLow to THigh 5
Input Offset Voltage VIO -5 0.5 5 mV VCC = 6.0 V, TA = 25°C 5
Input Offset Voltage VIO -7 0.5 7 mV VCC = 6.0 V, TA = TLow to THigh 5
Common Mode Rejection Ratio CMRR 53 65 dB VCM = VCC 5
Power Supply Rejection Ratio PSRR 45 55 dB VS = 2.575 V 5
Supply Current ICC 10 15 µA VCC = 0.85 V, TA = 25°C 5
Supply Current ICC 10 17 µA VCC = 0.85 V, TA = TLow to THigh (Note 7) 5
Supply Voltage Range (VCC to VEE) VCC 0.85 6 V VEE = 0 V; electrical characteristics header range 5
Supply Voltage Range (VCC to VEE) VS 6 V 3
Non-inverting/Inverting Input to VEE VCM -0.2 V Upper limit printed as (VCC + 0.2); not numeric, see review_required 3
Operating Ambient Temperature Range (NCS2202) TA -40 105 °C NCS2202 (non-NCV); NCV2202 is -40 to +125 °C 3
Operating Junction Temperature TJ 150 °C 3
Storage Temperature Range Tstg -65 150 °C 3
ESD Tolerance, Human Body Model (NCS2202) HBM 2000 V NCS2202 all pins 3
ESD Tolerance, Machine Model (NCS2202) MM 200 V NCS2202 3
Thermal Resistance, Junction-to-Ambient (SC70-5) RθJA 283 °C/W SC70-5 package 3

CAD (KiCad official)

  • Symbol: NCS2202SQ2T2G
  • Footprint: Package_TO_SOT_SMD:SOT-353_SC-70-5
  • 3D model: SC-70-5 (KiCad packages3D, STEP)
  • 3D model files: ncs2202sq2t2g-etched.step / ncs2202sq2t2g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ncs2202sq2t2g.step / ncs2202sq2t2g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (None pp, sha256 83baa340d578bf08, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF