Generated by kicad-footprint-generator · KiCad file format 20260206
NCP81599MNTXG
onsemi · DC-DC Controllers · QFN-32-EP(5x5)
NCP81599MNTXG from onsemi, in a QFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | HSG1 | output | S1 gate drive; drives the S1 N-channel MOSFET with a voltage equal to VDRV superimposed on the switch node voltage VSW1. |
| 2 | LSG1 | output | Drives the gate of the S2 N-channel MOSFET between ground and VDRV. |
| 3 | PGND1 | power_in | Power ground for the low side MOSFET drivers; connect closely to the source of the bottom N-channel MOSFETs. |
| 4 | CSN1 | input | Negative terminal of the current sense amplifier (rated -0.3 V to 35 V). |
| 5 | CSP1 | input | Positive terminal of the current sense amplifier (rated -0.3 V to 35 V). |
| 6 | V1 | power_in | Input voltage of the converter; operating range 4.5 V to 32 V (NCV81599) or 4.5 V to 28 V (NCP81599). |
| 7 | CS1 | output | Current sense amplifier output that sources a current proportional to the voltage across RS1 into an external resistor; ground this pin if not used. |
| 8 | CLIND | output | Open drain output; high voltage indicates that the CS1 or CS2 voltage has exceeded the I2C programmed limit. |
| 9 | SDA | bidirectional | I2C interface data line. |
| 10 | SCL | input | I2C interface clock line. |
| 11 | INT | output | Open drain interrupt output indicating the state of the output power, the internal thermal trip, and other I2C programmable functions. |
| 12 | ADDR | input | I2C address pin; a resistor of less than 200 kΩ to ground sets the I2C address. |
| 13 | AGND | power_in | Ground pin for the analog circuitry. |
| 14 | AGND | power_in | Ground pin for the analog circuitry. |
| 15 | COMP | output | Output of the transconductance amplifier used for stability in closed loop operation. |
| 16 | EN | input | Logic high enables switching and logic low shuts down and resets the device; a middle level stops switching and keeps VCC alive. |
| 17 | PDRV | output | Open drain output used to control a PMOSFET (rated -0.3 V to 35 V). |
| 18 | CS2 | output | Current sense amplifier output that sources a current proportional to the voltage across RS2 into an external resistor; ground this pin if not used. |
| 19 | FB | input | Feedback voltage of the output, negative terminal of the gm amplifier (rated -0.3 V to 5.5 V). |
| 20 | CSN2 | input | Negative terminal of the current sense amplifier (rated -0.3 V to 35 V). |
| 21 | CSP2 | input | Positive terminal of the current sense amplifier (rated -0.3 V to 35 V). |
| 22 | PGND2 | power_in | Power ground for the low side MOSFET drivers; connect closely to the source of the bottom N-channel MOSFETs. |
| 23 | LSG2 | output | Drives the gate of the S3 N-channel MOSFET between ground and VDRV. |
| 24 | HSG2 | output | S4 gate drive; drives the S4 N-channel MOSFET with a voltage equal to VDRV superimposed on the switch node voltage VSW2. |
| 25 | BST2 | passive | Bootstrapped driver supply swinging from a forward drop below VDRV up to a forward drop below VOUT + VDRV; place a 0.1 µF capacitor to VSW2. |
| 26 | VSW2 | passive | Switch node that swings from a diode voltage drop below ground up to the output voltage. |
| 27 | V2 | input | Output voltage of the converter; connect to the output externally for OVLO sense. |
| 28 | VCCD | power_in | Internal digital power supply input (4.5 V to 5.5 V); always connect to VCC and decouple with a 1 µF capacitor close to the part. |
| 29 | VDRV | power_in | Internal voltage supply to the driver circuits (4.5 V to 5.5 V); decouple with a 1 µF capacitor close to the part. |
| 30 | VCC | power_out | Output of a linear regulator powered from V1 that supplies the internal circuitry; decouple with a 1 µF capacitor. |
| 31 | VSW1 | passive | Switch node that swings from a diode voltage drop below ground up to V1. |
| 32 | BST1 | passive | Bootstrapped driver supply swinging from a forward drop below VDRV up to a forward drop below V1 + VDRV; place a 0.1 µF capacitor to VSW1. |
| 33 | THPAD | power_in | Center thermal pad; connect to AGND externally. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | QFN-32-EP(5x5) |
| Category | Power Supply Chip |
| Pins | 33 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage VCCD | VCCD | -0.3 | 5.5 | V | 5 | ||
| Address Pin Output Voltage | ADDR | -0.3 | 5.5 | V | 5 | ||
| Driver Input Voltage | VDRV | -0.3 | 5.5 | V | 5 | ||
| Internal Regulator Output | VCC | -0.3 | 5.5 | V | 5 | ||
| Output of Current Sense Amplifiers | CS1, CS2 | -0.3 | 5.5 | V | 5 | ||
| Enable Input | EN | -0.3 | 5.5 | V | 5 | ||
| Feedback Voltage | FB | -0.3 | 5.5 | V | 5 | ||
| V1 Power Stage Input Voltage | V1 | -0.3 | 35 | V | 40 V (20 ns) | 5 | |
| Positive and Negative Current Sense | CSP1, CSN1, CSP2, CSN2 | -0.3 | 35 | V | 40 V (20 ns) | 5 | |
| Low Side Driver | LSG1, LSG2 | -0.3 | 5.5 | V | 5 | ||
| PMOSFET Driver | PDRV | -0.3 | 35 | V | 40 V (20 ns) | 5 | |
| Voltage Differential AGND to PGND | AGND-PGND | -0.3 | 0.3 | V | 5 | ||
| CSP-CSN Differential Voltage | CS1DIF, CS2DIF | -0.5 | 0.5 | V | 5 | ||
| PDRV Maximum Current | PDRVI | 0 | 10 | mA | 5 | ||
| PDRV Maximum Pulse Current | PDRVIPUL | 0 | 200 | mA | 100 ms on time, with > 1 s interval | 5 | |
| Operating Junction Temperature Range | TJ | -40 | 150 | °C | 5 | ||
| Operating Ambient Temperature Range | TA | -40 | 125 | °C | 5 | ||
| Storage Temperature Range | TSTG | -55 | 150 | °C | 5 | ||
| Lead Temperature Soldering Reflow (Pb-Free) | RF | 260 | °C | Peak | 5 | ||
| Maximum Power Dissipation | PD | 4.1 | W | TA = 25°C | 5 | ||
| Maximum Power Dissipation | PD | 2.1 | W | TA = 85°C | 5 | ||
| Thermal Resistance Junction-to-Air with Solder | RJA | 30 | °C/W | 5 | |||
| Thermal Resistance Junction-to-Case Top with Solder | RJCT | 1.7 | °C/W | 5 | |||
| Thermal Resistance Junction-to-Case Bottom with Solder | RJCB | 2 | °C/W | 5 | |||
| V1 Operating Input Voltage (NCP81599) | V1 | 4.5 | 28 | V | 6 | ||
| VDRV Operating Input Voltage | VDRV | 4.5 | 5 | 5.5 | V | 6 | |
| VCCD Operating Input Voltage | VCCD | 4.5 | 5.5 | V | 6 | ||
| VCC UVLO Rising Threshold | VCCRISE | 4.21 | 4.27 | 4.35 | V | 6 | |
| VCC UVLO Falling Threshold | VCCFALL | 3.9 | 3.96 | 4.06 | V | 6 | |
| VDRV UVLO Rising Threshold | VDRVRISE | 4.21 | 4.31 | 4.35 | V | 6 | |
| VDRV UVLO Falling Threshold | VDRVFALL | 3.9 | 4.01 | 4.06 | V | 6 | |
| VCC Output Voltage | VCC | 4.5 | 5 | V | With no external load | 6 | |
| VCC Output Current Limit | IOUTVCC | 80 | 97 | mA | VCC Loaded to 4.3 V, EN > 0.8 V | 6 | |
| V1 Shutdown Supply Current | IVCC_SD | 15 | A | EN < 0.4 V, V1 = 12 V | 6 | ||
| V1 Normal Current | IV1 | 7.3 | mA | 0.8 V < EN < 1.88 V, 4.5 V ≤ V1 ≤ 32 V, (No Switching) | 6 | ||
| VCCD Standby Current | IVCCD | 4 | mA | 0.8 V < EN < 1.88 V | 6 | ||
| VCCD Switching Current | IVCCD_SW | 4.1 | mA | EN > 2.2 V | 6 | ||
| VDRIVE Switching Current Buck | IV1_SW | 16 | mA | EN = 5 V, Cgate = 2.2 nF, VSW = 0 V, FSW = 600 kHz | 6 | ||
| VDRIVE Switching Current Boost | IV1_SW | 15 | mA | EN = 5 V, Cgate = 2.2 nF, VSW = 0 V, FSW = 600 kHz | 6 | ||
| Voltage Output Accuracy FB | FB | 0.495 | 0.5 | 0.505 | V | DAC_TARGET = 00110010 | 6 |
| Voltage Output Accuracy FB | FB | 1.188 | 1.2 | 1.212 | V | DAC_TARGET = 01111000 | 6 |
| Voltage Output Accuracy FB | FB | 1.98 | 2 | 2.02 | V | DAC_TARGET = 11001000 | 6 |
| Voltage Accuracy Over Temperature | VOUTERT | -1 | 1 | % | VFB ≥ 0.5 V | 6 | |
| Voltage Accuracy Over Temperature | VOUTERT | -5 | 5 | mV | VFB < 0.5 V | 6 | |
| Voltage Accuracy | VOUTER | -0.45 | 0.45 | % | TA = 25°C, VFB ≥ 0.5 V | 6 | |
| Pass FET Reverse Leakage Current from BST to VDRV | IBST | 0.05 | 1 | A | DIL BST = 32 V, TA = 25°C | 6 | |
| BST-VSW UVLO Falling | BST_UVLO | 3.2 | 3.5 | 3.8 | V | BST_UVLO Falling | 6 |
| BST-VSW UVLO Rising | BST_UVLO | 3.4 | 3.7 | 4.1 | V | BST_UVLO Rising | 6 |
| Oscillator Frequency | FSW_0 | 552 | 600 | 648 | kHz | FSW = 000, default | 7 |
| Oscillator Frequency Accuracy | FSWE | -12 | 12 | % | 7 | ||
| Minimum On Time | MOT | 100 | ns | Measured at 10% to 90% of VCC | 7 | ||
| Minimum Off Time | MOFT | 100 | ns | Measured at 90% to 10% of VCC | 7 | ||
| Interrupt Low Voltage | VINTI | 0.2 | V | IINT(sink) = 2 mA | 7 | ||
| Transconductance Deviation | CSGE | -30 | 30 | % | CSPx−CSNx = 10 mV | 7 | |
| Transconductance Deviation | CSGE | -20 | 20 | % | CSPx−CSNx = 25 mV to 100 mV | 7 | |
| Input Current Sense Common Mode Range | CSCMMR_I | 4.5 | 32 | V | CSP1 is tied to V1 | 7 | |
| Output Current Sense Common Mode Range | CSCMMR_O | 4 | 25.5 | V | 7 | ||
| Current Limit Indicator Output Low | CLINDL | 100 | mV | Input current = 500 µA | 7 | ||
| Internal Current Sense Gain for PWM | ICG | 9.4 | 10 | 10.5 | V/V | CSPx−CSNx = 25 mV | 7 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | Vsw1/2 trace to high−side MOSFET source pin instead of copper pour area. The controller should be placed | 30 |
CAD (KiCad official)
- Symbol:
NCP81599MNTXG - Footprint:
Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm - 3D model: QFN-32-EP(5x5) (KiCad packages3D, STEP)
- 3D model files:
ncp81599mntxg-etched.step/ncp81599mntxg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ncp81599mntxg.step/ncp81599mntxg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (33 pp, sha256
a2417a587d3528d6, retrieved 2026-11-09, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).