main
Download ZIP Propose a change
Generated by adom_assets · KiCad file format 20240108
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ncp730asn500t1g: viewers · Ray
ncp730asn500t1g-etched.glb ncp730asn500t1g: factory component page (tier=mfr) · Ray
ncp730asn500t1g-etched.step ncp730asn500t1g: factory component page (tier=mfr) · Ray
ncp730asn500t1g-hero.glb ncp730asn500t1g: hero GLB from the etched model (keeps the MPN mark) · Ray
ncp730asn500t1g-hero.overlay.json ncp730asn500t1g: hero GLB from the etched model (keeps the MPN mark) · Ray
ncp730asn500t1g.glb Publish 0.1.0 · Ray
ncp730asn500t1g.kicad_mod Publish 0.1.0 · Ray
ncp730asn500t1g.kicad_sym Publish 0.1.0 · Ray
ncp730asn500t1g.lbr Publish 0.1.0 · Ray
ncp730asn500t1g.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 5 pins · Ray

NCP730ASN500T1G

onsemi · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · TSOP-5-1.5mm

NCP730ASN500T1G from onsemi, in a TSOP-5-1.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.

Pinout

Pin Name Type Function
1 IN power_in Power supply input pin, recommended input voltage 2.7 V to 38 V and absolute maximum VIN of −0.3 V to 40 V.
2 GND power_in Ground pin.
3 EN input Enable input, high enables and low disables the device; connecting it to IN or leaving it unconnected enables the device, and VEN is rated −0.3 V to (VIN + 0.3) V.
4 NC unconnected Not internally connected for this fixed-voltage version without PG; it can be tied to the ground plane to improve thermal dissipation.
5 OUT power_out Output pin; for fixed versions with VOUT-NOM ≤ 5.0 V the output voltage is rated −0.3 V to the lower of (VIN + 0.3 V) or 6.0 V, and output current is internally limited.

Key specifications

Parameter Value
Manufacturer onsemi
Package TSOP-5-1.5mm
Category Power Management (PMIC)
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Recommended Input Voltage VIN 2.7 38 V 4
Output Voltage Accuracy VOUT -1 1 % TJ = −40 °C to +85 °C 4
Output Voltage Accuracy VOUT -1 2 % TJ = −40 °C to +125 °C 4
Line Regulation VO(VI) 0.2 %VOUT VIN = VOUT-NOM + 1 V to 38 V and VIN ≥ 2.7 V 4
Load Regulation VO(IO) 0.4 %VOUT IOUT = 0.1 mA to 150 mA 4
Quiescent Current (version A) IQ 1.3 2.5 µA VIN = VOUT-NOM + 1 V to 38 V, IOUT = 0 mA 4
Ground Current IGND 325 450 µA IOUT = 150 mA 4
Shutdown Current ISHDN 0.35 1.5 µA VEN = 0 V, IOUT = 0 mA, VIN = 38 V 4
Output Current Limit IOLIM 200 280 450 mA VOUT = VOUT-NOM − 100 mV 5
Short Circuit Current IOSC 200 280 450 mA VOUT = 0 V 5
Dropout Voltage VDO 290 480 mV IOUT = 150 mA 5
EN Threshold VEN-TH 0.7 0.9 1.05 V VEN rising 5
EN Hysteresis VEN-HY 0.01 0.1 0.2 V VEN falling 5
EN Internal Pull-up Current IEN-PU 0.01 0.3 1 µA VEN = 1 V, VIN = 5.5 V 5
EN Input Leakage Current IEN-LK -1 0.05 1 µA VEN = 30 V, VIN = 30 V 5
Start-up time tSTART 300 600 1000 µs VOUT-NOM > 3.3 V 5
Internal UVLO Threshold VIUL-TH 1.6 1.95 2.6 V Ramp VIN up until output is turned on 5
Internal UVLO Hysteresis VIUL-HY 0.05 0.2 0.3 V Ramp VIN down until output is turned off 5
VIN Voltage VIN -0.3 40 V 4
VOUT Voltage (FIX, VOUT-NOM ≤ 5.0 V) VOUT -0.3 6 V FIX versions VOUT-NOM ≤ 5.0 V; upper limit is lower of (VIN + 0.3) V or 6.0 V 4
EN Voltage VEN -0.3 V Upper limit is VIN + 0.3 V 4
Maximum Junction Temperature TJ(MAX) 150 °C 4
Storage Temperature TSTG -55 150 °C 4
ESD Capability, Human Body Model ESDHBM 2000 V ANSI/ESDA/JEDEC JS-001, EIA/JESD22-A114 (Note 2) 4
ESD Capability, Charged Device Model ESDCDM 1000 V ANSI/ESDA/JEDEC JS-002, EIA/JESD22-C101 (Note 2) 4
Operating Junction Temperature Range TJ -40 125 °C Electrical characteristics temperature range 4
Thermal Resistance, Junction-to-Air RthJA 178 °C/W TSOP-5 column; Note 3 (JEDEC board 1S2P, no airflow) 4
Thermal Resistance, Junction-to-Case (top) RthJCt 93 °C/W TSOP-5 column; Note 3 4
Thermal Resistance, Junction-to-Board (top) RthJBt 53 °C/W TSOP-5 column; Note 3 4
Thermal Characterization Parameter, Junction-to-Case (top) PsiJCt 18 °C/W TSOP-5 column; Note 3 4
Thermal Characterization Parameter, Junction-to-Board [FEM] PsiJB 53 °C/W TSOP-5 column; Note 3 4

CAD (Adom-generated)

  • Symbol: NCP730ASN500T1G
  • Footprint: Adom_Gen:onsemi_NCP730_743659
  • 3D model: generated to fit the land (STEP)
  • 3D model files: ncp730asn500t1g-etched.step / ncp730asn500t1g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ncp730asn500t1g.step / ncp730asn500t1g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (33 pp, sha256 6e6fad810dc3e948, retrieved 2026-11-20)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land.

Datasheet PDF