3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownNCP730ASN500T1G
onsemi · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · TSOP-5-1.5mm
NCP730ASN500T1G from onsemi, in a TSOP-5-1.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Power supply input pin, recommended input voltage 2.7 V to 38 V and absolute maximum VIN of −0.3 V to 40 V. |
| 2 | GND | power_in | Ground pin. |
| 3 | EN | input | Enable input, high enables and low disables the device; connecting it to IN or leaving it unconnected enables the device, and VEN is rated −0.3 V to (VIN + 0.3) V. |
| 4 | NC | unconnected | Not internally connected for this fixed-voltage version without PG; it can be tied to the ground plane to improve thermal dissipation. |
| 5 | OUT | power_out | Output pin; for fixed versions with VOUT-NOM ≤ 5.0 V the output voltage is rated −0.3 V to the lower of (VIN + 0.3 V) or 6.0 V, and output current is internally limited. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | TSOP-5-1.5mm |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Recommended Input Voltage | VIN | 2.7 | 38 | V | 4 | ||
| Output Voltage Accuracy | VOUT | -1 | 1 | % | TJ = −40 °C to +85 °C | 4 | |
| Output Voltage Accuracy | VOUT | -1 | 2 | % | TJ = −40 °C to +125 °C | 4 | |
| Line Regulation | VO(VI) | 0.2 | %VOUT | VIN = VOUT-NOM + 1 V to 38 V and VIN ≥ 2.7 V | 4 | ||
| Load Regulation | VO(IO) | 0.4 | %VOUT | IOUT = 0.1 mA to 150 mA | 4 | ||
| Quiescent Current (version A) | IQ | 1.3 | 2.5 | µA | VIN = VOUT-NOM + 1 V to 38 V, IOUT = 0 mA | 4 | |
| Ground Current | IGND | 325 | 450 | µA | IOUT = 150 mA | 4 | |
| Shutdown Current | ISHDN | 0.35 | 1.5 | µA | VEN = 0 V, IOUT = 0 mA, VIN = 38 V | 4 | |
| Output Current Limit | IOLIM | 200 | 280 | 450 | mA | VOUT = VOUT-NOM − 100 mV | 5 |
| Short Circuit Current | IOSC | 200 | 280 | 450 | mA | VOUT = 0 V | 5 |
| Dropout Voltage | VDO | 290 | 480 | mV | IOUT = 150 mA | 5 | |
| EN Threshold | VEN-TH | 0.7 | 0.9 | 1.05 | V | VEN rising | 5 |
| EN Hysteresis | VEN-HY | 0.01 | 0.1 | 0.2 | V | VEN falling | 5 |
| EN Internal Pull-up Current | IEN-PU | 0.01 | 0.3 | 1 | µA | VEN = 1 V, VIN = 5.5 V | 5 |
| EN Input Leakage Current | IEN-LK | -1 | 0.05 | 1 | µA | VEN = 30 V, VIN = 30 V | 5 |
| Start-up time | tSTART | 300 | 600 | 1000 | µs | VOUT-NOM > 3.3 V | 5 |
| Internal UVLO Threshold | VIUL-TH | 1.6 | 1.95 | 2.6 | V | Ramp VIN up until output is turned on | 5 |
| Internal UVLO Hysteresis | VIUL-HY | 0.05 | 0.2 | 0.3 | V | Ramp VIN down until output is turned off | 5 |
| VIN Voltage | VIN | -0.3 | 40 | V | 4 | ||
| VOUT Voltage (FIX, VOUT-NOM ≤ 5.0 V) | VOUT | -0.3 | 6 | V | FIX versions VOUT-NOM ≤ 5.0 V; upper limit is lower of (VIN + 0.3) V or 6.0 V | 4 | |
| EN Voltage | VEN | -0.3 | V | Upper limit is VIN + 0.3 V | 4 | ||
| Maximum Junction Temperature | TJ(MAX) | 150 | °C | 4 | |||
| Storage Temperature | TSTG | -55 | 150 | °C | 4 | ||
| ESD Capability, Human Body Model | ESDHBM | 2000 | V | ANSI/ESDA/JEDEC JS-001, EIA/JESD22-A114 (Note 2) | 4 | ||
| ESD Capability, Charged Device Model | ESDCDM | 1000 | V | ANSI/ESDA/JEDEC JS-002, EIA/JESD22-C101 (Note 2) | 4 | ||
| Operating Junction Temperature Range | TJ | -40 | 125 | °C | Electrical characteristics temperature range | 4 | |
| Thermal Resistance, Junction-to-Air | RthJA | 178 | °C/W | TSOP-5 column; Note 3 (JEDEC board 1S2P, no airflow) | 4 | ||
| Thermal Resistance, Junction-to-Case (top) | RthJCt | 93 | °C/W | TSOP-5 column; Note 3 | 4 | ||
| Thermal Resistance, Junction-to-Board (top) | RthJBt | 53 | °C/W | TSOP-5 column; Note 3 | 4 | ||
| Thermal Characterization Parameter, Junction-to-Case (top) | PsiJCt | 18 | °C/W | TSOP-5 column; Note 3 | 4 | ||
| Thermal Characterization Parameter, Junction-to-Board [FEM] | PsiJB | 53 | °C/W | TSOP-5 column; Note 3 | 4 |
CAD (Adom-generated)
- Symbol:
NCP730ASN500T1G - Footprint:
Adom_Gen:onsemi_NCP730_743659 - 3D model: generated to fit the land (STEP)
- 3D model files:
ncp730asn500t1g-etched.step/ncp730asn500t1g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ncp730asn500t1g.step/ncp730asn500t1g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (33 pp, sha256
6e6fad810dc3e948, retrieved 2026-11-20) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land.