main
Ray
Publish 0.1.0
7b991e7
NCP702SN30T1G
onsemi · Pre-ordered transistors · TSOP-5
NCP702SN30T1G from onsemi, in a TSOP-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input pin; a 1 µF ceramic capacitor is recommended close to the device pin, with operating input voltage range of 2.0 V to 5.5 V. |
| 2 | GND | power_in | Power supply ground. |
| 3 | EN | input | Driving EN over 0.9 V turns on the regulator; driving EN below 0.4 V puts the regulator into shutdown mode. |
| 4 | N/C | unconnected | Not connected; this pin can be tied to ground to improve thermal dissipation. |
| 5 | OUT | power_out | Regulated output voltage pin; a small 1 µF ceramic capacitor is needed from this pin to ground to assure stability. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | TSOP-5 |
| Category | Transistors |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Input Voltage | VIN | 2 | 5.5 | V | 3 | ||
| Undervoltage lock-out | UVLO | 1.2 | 1.6 | 1.9 | V | VIN rising | 3 |
| Output Voltage Accuracy | VOUT | -2 | 2 | % | VOUT + 0.3 V ≤ VIN ≤ 5.5 V, IOUT = 0 − 200 mA | 3 | |
| Dropout voltage | VDO | 140 | 200 | mV | IOUT = 200 mA, VOUT(nom) = 2.5 V | 3 | |
| Output Current Limit | ICL | 220 | 385 | 550 | mA | VOUT = 90% VOUT(nom) | 3 |
| Quiescent current | IQ | 10 | 16 | µA | IOUT = 0 mA | 3 | |
| Shutdown current | IDIS | 0.01 | 1 | µA | VEN ≤ 0.4 V, VIN = 4.5 V | 3 | |
| EN High Threshold | VEN_HI | 0.9 | V | VEN Voltage increasing | 3 | ||
| EN Low Threshold | VEN_LO | 0.4 | V | VEN Voltage decreasing | 3 | ||
| EN Pin Input Current | IEN | 110 | 500 | nA | VEN = VIN = 5.5 V | 3 | |
| Load Transient | ΔVOUT | -30 | 30 | mV | IOUT = 1 mA to 200 mA or IOUT = 200 mA to 1 mA in 10 µs, COUT = 1 µF | 3 | |
| Line Regulation | RegLINE | 290 | µV/V | VOUT + 0.3 V ≤ VIN ≤ 4.5 V, IOUT = 10 mA | 3 | ||
| Line Regulation | RegLINE | 440 | µV/V | VOUT + 0.3 V ≤ VIN ≤ 5.5 V, IOUT = 10 mA | 3 | ||
| Load Regulation | RegLOAD | 13 | µV/mA | IOUT = 0 mA to 200 mA | 3 | ||
| Ground current | IGND | 60 | µA | IOUT = 2 mA | 3 | ||
| Ground current | IGND | 160 | µA | IOUT = 200 mA | 3 | ||
| Output Noise Voltage | VN | 11 | µVrms | VOUT = 2.5 V, VIN = 3 V, IOUT = 200 mA, f = 100 Hz to 100 kHz | 3 | ||
| Active Discharge Resistance | RDIS | 1 | kΩ | VEN < 0.4 V | 3 | ||
| Thermal Shutdown Temperature | TSD | 160 | °C | Temperature increasing from TJ = +25°C | 3 | ||
| Thermal Shutdown Hysteresis | TSDH | 20 | °C | Temperature falling from TSD | 3 | ||
| Input Voltage | VIN | -0.3 | 6 | V | 2 | ||
| Output Voltage | VOUT | -0.3 | V | max VIN + 0.3 V | 2 | ||
| Enable Input | VEN | -0.3 | V | max VIN + 0.3 V | 2 | ||
| Maximum Junction Temperature | TJ(MAX) | 150 | °C | 2 | |||
| Storage Temperature | TSTG | -55 | 150 | °C | 2 | ||
| ESD Human Body Model | ESDHBM | 2000 | V | 2 | |||
| ESD Machine Model | ESDMM | 200 | V | 2 | |||
| Thermal Resistance, Junction-to-Air | RθJA | 224 | °C/W | TSOP-5, 1 oz FR4 PCB with 645 mm2 Cu area | 3 | ||
| Thermal Characterization Parameter, Junction-to-Lead (Pin 2) | ΨJL | 115 | °C/W | TSOP-5 | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | copper area connected to the pins will also improve the | 17 |
CAD (KiCad official)
- Symbol:
NCP702SN30T1G - Footprint:
Package_SO:TSOP-5_1.65x3.05mm_P0.95mm - 3D model: TSOP-5 (KiCad packages3D, STEP)
- 3D model files:
ncp702sn30t1g-etched.step/ncp702sn30t1g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ncp702sn30t1g.step/ncp702sn30t1g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (21 pp, sha256
234818aa02b3c915, retrieved 2026-10-22, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# NCP702SN30T1G
**onsemi** · Pre-ordered transistors · TSOP-5
NCP702SN30T1G from onsemi, in a TSOP-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input pin; a 1 µF ceramic capacitor is recommended close to the device pin, with operating input voltage range of 2.0 V to 5.5 V. |
| 2 | GND | power_in | Power supply ground. |
| 3 | EN | input | Driving EN over 0.9 V turns on the regulator; driving EN below 0.4 V puts the regulator into shutdown mode. |
| 4 | N/C | unconnected | Not connected; this pin can be tied to ground to improve thermal dissipation. |
| 5 | OUT | power_out | Regulated output voltage pin; a small 1 µF ceramic capacitor is needed from this pin to ground to assure stability. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | TSOP-5 |
| Category | Transistors |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Input Voltage | VIN | 2 | | 5.5 | V | | 3 |
| Undervoltage lock-out | UVLO | 1.2 | 1.6 | 1.9 | V | VIN rising | 3 |
| Output Voltage Accuracy | VOUT | -2 | | 2 | % | VOUT + 0.3 V ≤ VIN ≤ 5.5 V, IOUT = 0 − 200 mA | 3 |
| Dropout voltage | VDO | | 140 | 200 | mV | IOUT = 200 mA, VOUT(nom) = 2.5 V | 3 |
| Output Current Limit | ICL | 220 | 385 | 550 | mA | VOUT = 90% VOUT(nom) | 3 |
| Quiescent current | IQ | | 10 | 16 | µA | IOUT = 0 mA | 3 |
| Shutdown current | IDIS | | 0.01 | 1 | µA | VEN ≤ 0.4 V, VIN = 4.5 V | 3 |
| EN High Threshold | VEN_HI | | | 0.9 | V | VEN Voltage increasing | 3 |
| EN Low Threshold | VEN_LO | 0.4 | | | V | VEN Voltage decreasing | 3 |
| EN Pin Input Current | IEN | | 110 | 500 | nA | VEN = VIN = 5.5 V | 3 |
| Load Transient | ΔVOUT | -30 | | 30 | mV | IOUT = 1 mA to 200 mA or IOUT = 200 mA to 1 mA in 10 µs, COUT = 1 µF | 3 |
| Line Regulation | RegLINE | | 290 | | µV/V | VOUT + 0.3 V ≤ VIN ≤ 4.5 V, IOUT = 10 mA | 3 |
| Line Regulation | RegLINE | | 440 | | µV/V | VOUT + 0.3 V ≤ VIN ≤ 5.5 V, IOUT = 10 mA | 3 |
| Load Regulation | RegLOAD | | 13 | | µV/mA | IOUT = 0 mA to 200 mA | 3 |
| Ground current | IGND | | 60 | | µA | IOUT = 2 mA | 3 |
| Ground current | IGND | | 160 | | µA | IOUT = 200 mA | 3 |
| Output Noise Voltage | VN | | 11 | | µVrms | VOUT = 2.5 V, VIN = 3 V, IOUT = 200 mA, f = 100 Hz to 100 kHz | 3 |
| Active Discharge Resistance | RDIS | | 1 | | kΩ | VEN < 0.4 V | 3 |
| Thermal Shutdown Temperature | TSD | | 160 | | °C | Temperature increasing from TJ = +25°C | 3 |
| Thermal Shutdown Hysteresis | TSDH | | 20 | | °C | Temperature falling from TSD | 3 |
| Input Voltage | VIN | -0.3 | | 6 | V | | 2 |
| Output Voltage | VOUT | -0.3 | | | V | max VIN + 0.3 V | 2 |
| Enable Input | VEN | -0.3 | | | V | max VIN + 0.3 V | 2 |
| Maximum Junction Temperature | TJ(MAX) | | | 150 | °C | | 2 |
| Storage Temperature | TSTG | -55 | | 150 | °C | | 2 |
| ESD Human Body Model | ESDHBM | | | 2000 | V | | 2 |
| ESD Machine Model | ESDMM | | | 200 | V | | 2 |
| Thermal Resistance, Junction-to-Air | RθJA | | 224 | | °C/W | TSOP-5, 1 oz FR4 PCB with 645 mm2 Cu area | 3 |
| Thermal Characterization Parameter, Junction-to-Lead (Pin 2) | ΨJL | | 115 | | °C/W | TSOP-5 | 3 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | | copper area connected to the pins will also improve the | 17 |
## CAD (KiCad official)
- Symbol: `NCP702SN30T1G`
- Footprint: `Package_SO:TSOP-5_1.65x3.05mm_P0.95mm`
- 3D model: TSOP-5 (KiCad packages3D, STEP)
- 3D model files: `ncp702sn30t1g-etched.step` / `ncp702sn30t1g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ncp702sn30t1g.step` / `ncp702sn30t1g.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/ncp702sn30t1-d.pdf) (21 pp, sha256 `234818aa02b3c915`, retrieved 2026-10-22, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ncp702sn30t1g-datasheet.pdf)