main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ncp702sn30t1g: viewers · Ray
ncp702sn30t1g-etched.glb Publish 0.1.0 · Ray
ncp702sn30t1g-etched.step ncp702sn30t1g: factory component page (tier=mfr) · Ray
ncp702sn30t1g-hero.glb ncp702sn30t1g: hero GLB from the etched model (keeps the MPN mark) · Ray
ncp702sn30t1g-hero.overlay.json Publish 0.1.0 · Ray
ncp702sn30t1g.glb Publish 0.1.0 · Ray
ncp702sn30t1g.kicad_mod Publish 0.1.0 · Ray
ncp702sn30t1g.kicad_sym Publish 0.1.0 · Ray
ncp702sn30t1g.lbr Publish 0.1.0 · Ray
ncp702sn30t1g.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray

NCP702SN30T1G

onsemi · Pre-ordered transistors · TSOP-5

NCP702SN30T1G from onsemi, in a TSOP-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN power_in Input pin; a 1 µF ceramic capacitor is recommended close to the device pin, with operating input voltage range of 2.0 V to 5.5 V.
2 GND power_in Power supply ground.
3 EN input Driving EN over 0.9 V turns on the regulator; driving EN below 0.4 V puts the regulator into shutdown mode.
4 N/C unconnected Not connected; this pin can be tied to ground to improve thermal dissipation.
5 OUT power_out Regulated output voltage pin; a small 1 µF ceramic capacitor is needed from this pin to ground to assure stability.

Key specifications

Parameter Value
Manufacturer onsemi
Package TSOP-5
Category Transistors
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating Input Voltage VIN 2 5.5 V 3
Undervoltage lock-out UVLO 1.2 1.6 1.9 V VIN rising 3
Output Voltage Accuracy VOUT -2 2 % VOUT + 0.3 V ≤ VIN ≤ 5.5 V, IOUT = 0 − 200 mA 3
Dropout voltage VDO 140 200 mV IOUT = 200 mA, VOUT(nom) = 2.5 V 3
Output Current Limit ICL 220 385 550 mA VOUT = 90% VOUT(nom) 3
Quiescent current IQ 10 16 µA IOUT = 0 mA 3
Shutdown current IDIS 0.01 1 µA VEN ≤ 0.4 V, VIN = 4.5 V 3
EN High Threshold VEN_HI 0.9 V VEN Voltage increasing 3
EN Low Threshold VEN_LO 0.4 V VEN Voltage decreasing 3
EN Pin Input Current IEN 110 500 nA VEN = VIN = 5.5 V 3
Load Transient ΔVOUT -30 30 mV IOUT = 1 mA to 200 mA or IOUT = 200 mA to 1 mA in 10 µs, COUT = 1 µF 3
Line Regulation RegLINE 290 µV/V VOUT + 0.3 V ≤ VIN ≤ 4.5 V, IOUT = 10 mA 3
Line Regulation RegLINE 440 µV/V VOUT + 0.3 V ≤ VIN ≤ 5.5 V, IOUT = 10 mA 3
Load Regulation RegLOAD 13 µV/mA IOUT = 0 mA to 200 mA 3
Ground current IGND 60 µA IOUT = 2 mA 3
Ground current IGND 160 µA IOUT = 200 mA 3
Output Noise Voltage VN 11 µVrms VOUT = 2.5 V, VIN = 3 V, IOUT = 200 mA, f = 100 Hz to 100 kHz 3
Active Discharge Resistance RDIS 1 kΩ VEN < 0.4 V 3
Thermal Shutdown Temperature TSD 160 °C Temperature increasing from TJ = +25°C 3
Thermal Shutdown Hysteresis TSDH 20 °C Temperature falling from TSD 3
Input Voltage VIN -0.3 6 V 2
Output Voltage VOUT -0.3 V max VIN + 0.3 V 2
Enable Input VEN -0.3 V max VIN + 0.3 V 2
Maximum Junction Temperature TJ(MAX) 150 °C 2
Storage Temperature TSTG -55 150 °C 2
ESD Human Body Model ESDHBM 2000 V 2
ESD Machine Model ESDMM 200 V 2
Thermal Resistance, Junction-to-Air RθJA 224 °C/W TSOP-5, 1 oz FR4 PCB with 645 mm2 Cu area 3
Thermal Characterization Parameter, Junction-to-Lead (Pin 2) ΨJL 115 °C/W TSOP-5 3

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper copper area connected to the pins will also improve the 17

CAD (KiCad official)

  • Symbol: NCP702SN30T1G
  • Footprint: Package_SO:TSOP-5_1.65x3.05mm_P0.95mm
  • 3D model: TSOP-5 (KiCad packages3D, STEP)
  • 3D model files: ncp702sn30t1g-etched.step / ncp702sn30t1g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ncp702sn30t1g.step / ncp702sn30t1g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (21 pp, sha256 234818aa02b3c915, retrieved 2026-10-22, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF