NCP600SNADJT1G

{
  "slug": "ncp600snadjt1g",
  "version": "0.1.0",
  "type": "component",
  "description": "onsemi Linear Voltage Regulators (LDO), TSOP-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management ics",
    "ncp600snadjt1g",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ncp600snadjt1g.kicad_sym",
    "ncp600snadjt1g.kicad_mod",
    "ncp600snadjt1g.glb",
    "ncp600snadjt1g.step",
    "ncp600snadjt1g.lbr",
    "docs/hero.png",
    "docs/ncp600snadjt1g-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ncp600snadjt1g-hero.glb",
    "ncp600snadjt1g-hero.overlay.json",
    "ncp600snadjt1g-etched.glb"
  ],
  "component": {
    "mpn": "NCP600SNADJT1G",
    "manufacturer": "onsemi",
    "package": "TSOP-5",
    "pin_count": 5,
    "category": "Power Management ICs",
    "subcategory": "Linear Voltage Regulators (LDO)",
    "datasheet": "https://www.onsemi.com/pdf/datasheet/ncp600snadjt1-d.pdf",
    "parts": {
      "symbol": "ncp600snadjt1g.kicad_sym",
      "footprint": "ncp600snadjt1g.kicad_mod",
      "model_3d": "ncp600snadjt1g-hero.glb",
      "model_3d_plain": "ncp600snadjt1g-etched.glb",
      "model_3d_step": "ncp600snadjt1g-etched.step",
      "model_3d_step_plain": "ncp600snadjt1g.step",
      "lbr": "ncp600snadjt1g.lbr"
    },
    "distributor_links": {
      "lcsc": "C14299",
      "digikey": "NCP600SNADJT1GOSTR-ND",
      "mouser": "863-NCP600SNADJT1G"
    },
    "distributor_check": {
      "checked_at": "2026-11-02T17:44:04Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "NCP600SNADJT1GOSTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "863-NCP600SNADJT1G",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "Vin",
        "type": "power_in",
        "description": "Positive power supply input; the operating input voltage range is 1.75 V to 6 V, and Vin must be at least Vout + VDO."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Power supply ground, also connected to the device substrate."
      },
      {
        "number": "3",
        "name": "ENABLE",
        "type": "input",
        "description": "Enable input places the device into low-power standby when pulled below 0.4 V logic low; connect to Vin if the function is not used."
      },
      {
        "number": "4",
        "name": "ADJ/NC",
        "type": "input",
        "description": "Output voltage adjust input for the adjustable version (ADJ), where the output is set by external resistors from 5.0 V down to 1.25 V and input bias current IADJ is typically less than 150 nA; no connection on fixed voltage versions."
      },
      {
        "number": "5",
        "name": "Vout",
        "type": "output",
        "description": "Regulated output voltage, delivering up to 150 mA of output current."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 15,
        "cost_usd": 0.0199,
        "at": "2026-11-02T17:43:56"
      },
      "datasheet": {
        "url": "https://www.onsemi.com/pdf/datasheet/ncp600snadjt1-d.pdf",
        "pages": 15,
        "sha256": "ea92c12502a32ad7",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 5,
        "described": 5,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ncp600snadjt1g.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          3.05,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "7bb4f709cbcec3383aaa7ba920208a4d73b376d9bb60806b65f21dbdb00a84b7",
        "checked": "2026-11-02",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ncp600snadjt1g-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          3.05,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "9f15c1599228ab7dffef398e9c1790a99b9b00bf10caa74d5330bd3b9fd0129e",
        "checked": "2026-11-02",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}