main
Ray ncp59744mn2adjtbg: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 1179b55
{
  "schema_version": 1,
  "type": "component",
  "slug": "ncp59744mn2adjtbg",
  "title": "NCP59744MN2ADJTBG",
  "brief": "onsemi Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, QFN-20(5x5). Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "pmic",
    "ncp59744mn2adjtbg"
  ],
  "component": {
    "mpn": "NCP59744MN2ADJTBG",
    "manufacturer": "onsemi",
    "package": "QFN-20(5x5)",
    "pin_count": 21,
    "category": "PMIC",
    "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",
    "datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/1912271732_onsemi-NCP59744MN2ADJTBG_C462919.pdf",
    "parts": {
      "symbol": "ncp59744mn2adjtbg.kicad_sym",
      "footprint": "ncp59744mn2adjtbg.kicad_mod",
      "model_3d": "ncp59744mn2adjtbg-etched.glb",
      "model_3d_plain": "ncp59744mn2adjtbg.glb",
      "model_3d_step": "ncp59744mn2adjtbg-etched.step",
      "model_3d_step_plain": "ncp59744mn2adjtbg.step",
      "lbr": "ncp59744mn2adjtbg.lbr"
    },
    "distributor_links": {},
    "pins": [
      {
        "number": "1",
        "name": "OUT",
        "type": "power_out",
        "description": "Regulated output voltage (0.8 V to 3.6 V). One of four paralleled OUT pins (1, 18, 19, 20). Recommended COUT >= 2.2 uF ceramic."
      },
      {
        "number": "2",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection. May be left floating or tied to GND for improved thermal contact to the top-side plane."
      },
      {
        "number": "3",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection. May be left floating or tied to GND for improved thermal contact to the top-side plane."
      },
      {
        "number": "4",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection. May be left floating or tied to GND for improved thermal contact to the top-side plane."
      },
      {
        "number": "5",
        "name": "IN",
        "type": "power_in",
        "description": "Unregulated input to the pass device (VIN 0.8 V to 5.5 V). One of four paralleled IN pins (5, 6, 7, 8)."
      },
      {
        "number": "6",
        "name": "IN",
        "type": "power_in",
        "description": "Unregulated input to the pass device (VIN 0.8 V to 5.5 V). One of four paralleled IN pins (5, 6, 7, 8)."
      },
      {
        "number": "7",
        "name": "IN",
        "type": "power_in",
        "description": "Unregulated input to the pass device (VIN 0.8 V to 5.5 V). One of four paralleled IN pins (5, 6, 7, 8)."
      },
      {
        "number": "8",
        "name": "IN",
        "type": "power_in",
        "description": "Unregulated input to the pass device (VIN 0.8 V to 5.5 V). One of four paralleled IN pins (5, 6, 7, 8)."
      },
      {
        "number": "9",
        "name": "PG",
        "type": "output",
        "description": "Power-Good open-drain, active-high output. Goes high-Z when VOUT exceeds the PG trip threshold (~90% of nominal) and is pulled low otherwise. Requires an external 10 kOhm to 1 MOhm pull-up to a supply up to 5.5 V. May be left floating if unused."
      },
      {
        "number": "10",
        "name": "BIAS",
        "type": "power_in",
        "description": "Bias input voltage (2.2 V to 5.5 V) for the error amplifier, reference, and internal control circuits. Typical IBIAS ~1.3 mA."
      },
      {
        "number": "11",
        "name": "EN",
        "type": "input",
        "description": "Enable pin. Driving high (>=1.1 V) enables the regulator; driving low (<=0.4 V) puts it into shutdown. Must not be left floating. 100 mV hysteresis and ~20 us deglitch."
      },
      {
        "number": "12",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the regulator."
      },
      {
        "number": "13",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection. May be left floating or tied to GND for improved thermal contact to the top-side plane."
      },
      {
        "number": "14",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection. May be left floating or tied to GND for improved thermal contact to the top-side plane."
      },
      {
        "number": "15",
        "name": "SS",
        "type": "passive",
        "description": "Soft-Start pin. A capacitor from this pin to GND sets the startup time using ISS ~0.45 uA charging. If left floating, soft-start ramp is typically 200 us. Must not be left floating for user-programmed soft-start."
      },
      {
        "number": "16",
        "name": "FB",
        "type": "input",
        "description": "Feedback input to the error amplifier. Connect to the center tap of an external resistor divider that sets the output voltage (VREF = 0.8 V). Must not be left floating."
      },
      {
        "number": "17",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection. May be left floating or tied to GND for improved thermal contact to the top-side plane."
      },
      {
        "number": "18",
        "name": "OUT",
        "type": "power_out",
        "description": "Regulated output voltage. One of four paralleled OUT pins (1, 18, 19, 20)."
      },
      {
        "number": "19",
        "name": "OUT",
        "type": "power_out",
        "description": "Regulated output voltage. One of four paralleled OUT pins (1, 18, 19, 20)."
      },
      {
        "number": "20",
        "name": "OUT",
        "type": "power_out",
        "description": "Regulated output voltage. One of four paralleled OUT pins (1, 18, 19, 20)."
      },
      {
        "number": "PAD",
        "name": "GND",
        "type": "power_in",
        "description": "Exposed thermal pad on the underside of the package. Must be soldered to the PCB ground plane for proper thermal performance and electrical grounding."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/1912271732_onsemi-NCP59744MN2ADJTBG_C462919.pdf",
        "pages": 12,
        "sha256": "85f37db2e0c8407b",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 21,
        "described": 21,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ncp59744mn2adjtbg.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5,
          5,
          0.77
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "9466f19e7a94c1920e0c82ac10746517bca0b846bd3c01a7053914bd9856799f",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ncp59744mn2adjtbg-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5,
          5,
          0.77
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "9b0b65a20558a8daa8501b173b7fada05c7190e5d1d7477ff5c4c0242f7ce6fe",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "onsemi",
      "Package": "QFN-20(5x5)",
      "Category": "PMIC",
      "Pins": "21"
    }
  },
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "ncp59744mn2adjtbg"
  ],
  "discovery_pitch": "NCP59744MN2ADJTBG (onsemi) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ncp59744mn2adjtbg.kicad_sym",
    "ncp59744mn2adjtbg.kicad_mod",
    "ncp59744mn2adjtbg.glb",
    "ncp59744mn2adjtbg.step",
    "ncp59744mn2adjtbg.lbr",
    "docs/hero.png",
    "docs/ncp59744mn2adjtbg-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ncp59744mn2adjtbg-etched.step"
  ],
  "visibility": {
    "public": true
  },
  "variants": [
    {
      "mpn": "NCP59744MN2ADJTBG",
      "kind": "packaging"
    },
    {
      "mpn": "NCP59744MN1ADJTBG",
      "kind": "unknown"
    }
  ],
  "updated_at": "2026-09-25T02:59:47.718Z"
}