main
Ray Publish 0.1.0 35ff24d

NCP51530BMNTWG

onsemi · Gate Drivers · DFN-10-EP(4x4)

NCP51530BMNTWG from onsemi, in a DFN-10-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.

Pinout

Pin Name Type Function
1 VCC power_in VCC is the low side and logic supply pin.
2 HIN input HIN is the high side input pin.
3 LIN input LIN is the low side input pin.
4 GND power_in GND is the ground reference; the signal ground should be connected to bulk ground externally.
5 GND power_in GND is the ground reference; the driver ground should be connected to bulk ground externally.
6 LO output LO is the low side output pin.
7 NC unconnected NC is a no-connect pin.
8 HB power_in HB is the high side supply return pin.
9 HO output HO is the high side output pin.
10 VB power_in VB is the high side voltage supply pin.
11 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer onsemi
Package DFN-10-EP(4x4)
Category Motor Driver ICs
Pins 11

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage range VCC -0.3 20 V All voltages referenced to GND pin 5
High side boot pin voltage VB -0.3 720 V All voltages referenced to GND pin 5
High side floating voltage VB-VHB -0.3 20 V All voltages referenced to GND pin 5
Allowable hb slew rate dVHB/dt 50 V/ns 5
Drive input voltage VLIN, VHIN -5 V Upper limit VCC+0.3 V (not numeric) 5
Junction temperature TJ(MAX) 150 °C 5
Storage temperature range TSTG -55 150 °C 5
ESD capability Human Body Model 4000 V Per JEDEC JESD22-A114E 5
ESD capability Charge Device Model 1000 V Per JEDEC JESD22-C101E 5
Lead temperature soldering reflow 260 °C Reflow (SMD styles only), Pb-Free versions 5
Input Voltage Range VCC 10 17 V 6
High Side Floating Voltage VB-VHB 10 17 V 6
High Side Bridge pin Voltage VHB -1 700 V 6
Operating Junction Temperature Range TJ -40 125 °C 6
VCC quiescent current ICCQ 0.15 0.25 mA VLIN=VHIN=0 6
VCC operating current ICCO 0.7 1 mA f = 500 kHz, CLOAD = 0 6
Boot voltage quiescent current IBQ 0.1 0.15 mA VLIN = VHIN = 0 V 6
Boot voltage operating current IBO 0.7 1 mA f = 500 kHz, CLOAD = 0 6
HB to GND quiescent current IHBQ 6 11 A VHS = VHB = 700 V 6
Input rising threshold VHIT 2.3 2.7 3.1 V 6
Input falling threshold VLIT 1 1.4 1.8 V 6
Input pulldown resistance RIN 100 175 250 k VXIN = 5 V 6
VCC ON VCCon 8.6 9.1 9.6 V VCC Rising 6
VB ON VBon 8 8.5 9 V VB Rising 6
High Side Startup Time Tstartup 10 s Time between VB > UVLO and 1st HO Pulse 6
Low level output voltage VLOL 0.125 V ILO = 100 mA 6
High level output voltage VLOH 0.15 V ILO = -100 mA, VLOH = VCC -VLO 6
Low level output voltage HO VHOL 0.125 V IHO = 100 mA 7
High level output voltage HO VHOH 0.15 V IHO = -100 mA, VHOH = VHB -VHO 7
Rise Time LO, HO TR 8 15 ns Cload = 1000 pF 7
Fall Time LO, HO TF 8 15 ns Cload = 1000 pF 7
Delay matching LI ON, HI OFF TMON 7 ns Pulse width = 1 s 7
Delay matching LI OFF, HI ON TMOFF 7 ns Pulse width = 1 s 7
VLI falling to VLO falling (NCP51530B) TDLFF 25 40 ns Cload = 0, Minimum On/Off-time to register as a valid change = 50 ns 7
VHI falling to VHO falling (NCP51530B) TDHFF 25 40 ns Cload = 0, Minimum On/Off-time to register as a valid change = 50 ns 7
VLI rising to VLO rising (NCP51530B) TDLRR 25 40 ns Cload = 0, Minimum On/Off-time to register as a valid change = 50 ns 7
VHI rising to VHO rising (NCP51530B) TDHRR 25 40 ns Cload = 0, Minimum On/Off-time to register as a valid change = 50 ns 7
Thermal resistance junction to air, DFN10 RJA 162 °C/W DFN10 package; copper area 50 mm2 of 1 oz, FR4 PCB (Note 5) 6
Input voltage hysteresis VIHYS 1.3 V 6
VCC hysteresis VCChys 0.5 V 6
VB hysteresis VBhyst 0.5 V 6
Peak source current LO ILOpullup 3.5 A VLO = 0 V 6
Peak sink current LO ILOpulldown 3 A VLO = 12 V 7
Peak source current HO IHOpullup 3.5 A VHO = 0 V 7
Peak sink current HO IHOpulldown 3 A VHO = 12 V 7

CAD (Adom-generated)

  • Symbol: NCP51530BMNTWG
  • Footprint: Adom_Gen:onsemi_NCP51530_4f7f9b
  • 3D model: generated to fit the land (STEP)
  • 3D model files: ncp51530bmntwg-etched.step / ncp51530bmntwg-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ncp51530bmntwg.step / ncp51530bmntwg.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (30 pp, sha256 2ff6300b5b916d0e, retrieved 2026-11-20)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land. Land: onsemi NCP51530/D p.27, CASE 506DJ 'DFN10 4x4, 0.8P' (98AON12037G), RECOMMENDED MOUNTING FOOTPRINT: 10X pads 0.42 x 0.60 at 0.80 pitch; 4.30 across the outer pad edges, so pad centres at +/-1.85 (2.15 - 0.30); exposed pad 3.20 x 2.15, its edge on the pins 6-10 side 0.75 from the package centreline, so it spans -1.40..+0.75 and its centre sits 0.325 toward pins 1-5 (matches the package drawing's E3 offset of the exposed pad toward pin 1). Printed top view has pins 1-5 along the bottom; rotated 90 deg to KiCad's pins 1-5 down the left, 6-10 up the right, exposed pad 11 at x -0.325. Body from the same page: D = E = 4.00 BSC, A 0.80-1.00 (0.90 used), e 0.80 BSC.

Datasheet PDF