Generated by adom_assets · KiCad file format 20240108
NCP51530BMNTWG
onsemi · Gate Drivers · DFN-10-EP(4x4)
NCP51530BMNTWG from onsemi, in a DFN-10-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | VCC is the low side and logic supply pin. |
| 2 | HIN | input | HIN is the high side input pin. |
| 3 | LIN | input | LIN is the low side input pin. |
| 4 | GND | power_in | GND is the ground reference; the signal ground should be connected to bulk ground externally. |
| 5 | GND | power_in | GND is the ground reference; the driver ground should be connected to bulk ground externally. |
| 6 | LO | output | LO is the low side output pin. |
| 7 | NC | unconnected | NC is a no-connect pin. |
| 8 | HB | power_in | HB is the high side supply return pin. |
| 9 | HO | output | HO is the high side output pin. |
| 10 | VB | power_in | VB is the high side voltage supply pin. |
| 11 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | DFN-10-EP(4x4) |
| Category | Motor Driver ICs |
| Pins | 11 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage range | VCC | -0.3 | 20 | V | All voltages referenced to GND pin | 5 | |
| High side boot pin voltage | VB | -0.3 | 720 | V | All voltages referenced to GND pin | 5 | |
| High side floating voltage | VB-VHB | -0.3 | 20 | V | All voltages referenced to GND pin | 5 | |
| Allowable hb slew rate | dVHB/dt | 50 | V/ns | 5 | |||
| Drive input voltage | VLIN, VHIN | -5 | V | Upper limit VCC+0.3 V (not numeric) | 5 | ||
| Junction temperature | TJ(MAX) | 150 | °C | 5 | |||
| Storage temperature range | TSTG | -55 | 150 | °C | 5 | ||
| ESD capability Human Body Model | 4000 | V | Per JEDEC JESD22-A114E | 5 | |||
| ESD capability Charge Device Model | 1000 | V | Per JEDEC JESD22-C101E | 5 | |||
| Lead temperature soldering reflow | 260 | °C | Reflow (SMD styles only), Pb-Free versions | 5 | |||
| Input Voltage Range | VCC | 10 | 17 | V | 6 | ||
| High Side Floating Voltage | VB-VHB | 10 | 17 | V | 6 | ||
| High Side Bridge pin Voltage | VHB | -1 | 700 | V | 6 | ||
| Operating Junction Temperature Range | TJ | -40 | 125 | °C | 6 | ||
| VCC quiescent current | ICCQ | 0.15 | 0.25 | mA | VLIN=VHIN=0 | 6 | |
| VCC operating current | ICCO | 0.7 | 1 | mA | f = 500 kHz, CLOAD = 0 | 6 | |
| Boot voltage quiescent current | IBQ | 0.1 | 0.15 | mA | VLIN = VHIN = 0 V | 6 | |
| Boot voltage operating current | IBO | 0.7 | 1 | mA | f = 500 kHz, CLOAD = 0 | 6 | |
| HB to GND quiescent current | IHBQ | 6 | 11 | A | VHS = VHB = 700 V | 6 | |
| Input rising threshold | VHIT | 2.3 | 2.7 | 3.1 | V | 6 | |
| Input falling threshold | VLIT | 1 | 1.4 | 1.8 | V | 6 | |
| Input pulldown resistance | RIN | 100 | 175 | 250 | k | VXIN = 5 V | 6 |
| VCC ON | VCCon | 8.6 | 9.1 | 9.6 | V | VCC Rising | 6 |
| VB ON | VBon | 8 | 8.5 | 9 | V | VB Rising | 6 |
| High Side Startup Time | Tstartup | 10 | s | Time between VB > UVLO and 1st HO Pulse | 6 | ||
| Low level output voltage | VLOL | 0.125 | V | ILO = 100 mA | 6 | ||
| High level output voltage | VLOH | 0.15 | V | ILO = -100 mA, VLOH = VCC -VLO | 6 | ||
| Low level output voltage HO | VHOL | 0.125 | V | IHO = 100 mA | 7 | ||
| High level output voltage HO | VHOH | 0.15 | V | IHO = -100 mA, VHOH = VHB -VHO | 7 | ||
| Rise Time LO, HO | TR | 8 | 15 | ns | Cload = 1000 pF | 7 | |
| Fall Time LO, HO | TF | 8 | 15 | ns | Cload = 1000 pF | 7 | |
| Delay matching LI ON, HI OFF | TMON | 7 | ns | Pulse width = 1 s | 7 | ||
| Delay matching LI OFF, HI ON | TMOFF | 7 | ns | Pulse width = 1 s | 7 | ||
| VLI falling to VLO falling (NCP51530B) | TDLFF | 25 | 40 | ns | Cload = 0, Minimum On/Off-time to register as a valid change = 50 ns | 7 | |
| VHI falling to VHO falling (NCP51530B) | TDHFF | 25 | 40 | ns | Cload = 0, Minimum On/Off-time to register as a valid change = 50 ns | 7 | |
| VLI rising to VLO rising (NCP51530B) | TDLRR | 25 | 40 | ns | Cload = 0, Minimum On/Off-time to register as a valid change = 50 ns | 7 | |
| VHI rising to VHO rising (NCP51530B) | TDHRR | 25 | 40 | ns | Cload = 0, Minimum On/Off-time to register as a valid change = 50 ns | 7 | |
| Thermal resistance junction to air, DFN10 | RJA | 162 | °C/W | DFN10 package; copper area 50 mm2 of 1 oz, FR4 PCB (Note 5) | 6 | ||
| Input voltage hysteresis | VIHYS | 1.3 | V | 6 | |||
| VCC hysteresis | VCChys | 0.5 | V | 6 | |||
| VB hysteresis | VBhyst | 0.5 | V | 6 | |||
| Peak source current LO | ILOpullup | 3.5 | A | VLO = 0 V | 6 | ||
| Peak sink current LO | ILOpulldown | 3 | A | VLO = 12 V | 7 | ||
| Peak source current HO | IHOpullup | 3.5 | A | VHO = 0 V | 7 | ||
| Peak sink current HO | IHOpulldown | 3 | A | VHO = 12 V | 7 |
CAD (Adom-generated)
- Symbol:
NCP51530BMNTWG - Footprint:
Adom_Gen:onsemi_NCP51530_4f7f9b - 3D model: generated to fit the land (STEP)
- 3D model files:
ncp51530bmntwg-etched.step/ncp51530bmntwg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ncp51530bmntwg.step/ncp51530bmntwg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (30 pp, sha256
2ff6300b5b916d0e, retrieved 2026-11-20) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land. Land: onsemi NCP51530/D p.27, CASE 506DJ 'DFN10 4x4, 0.8P' (98AON12037G), RECOMMENDED MOUNTING FOOTPRINT: 10X pads 0.42 x 0.60 at 0.80 pitch; 4.30 across the outer pad edges, so pad centres at +/-1.85 (2.15 - 0.30); exposed pad 3.20 x 2.15, its edge on the pins 6-10 side 0.75 from the package centreline, so it spans -1.40..+0.75 and its centre sits 0.325 toward pins 1-5 (matches the package drawing's E3 offset of the exposed pad toward pin 1). Printed top view has pins 1-5 along the bottom; rotated 90 deg to KiCad's pins 1-5 down the left, 6-10 up the right, exposed pad 11 at x -0.325. Body from the same page: D = E = 4.00 BSC, A 0.80-1.00 (0.90 used), e 0.80 BSC.