main
Ray Publish 0.1.0 8cd60ea

NCP51530AMNTWG

onsemi · Gate Drive ICs · DFN-10-EP(4x4)

NCP51530AMNTWG from onsemi, in a DFN-10-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.

Pinout

Pin Name Type Function
1 VCC power_in Low side and logic supply pin.
2 HIN input High side input pin.
3 LIN input Low side input pin.
4 GND power_in Ground reference; the signal ground should be connected to bulk ground externally.
5 GND power_in Ground reference; the driver ground should be connected to bulk ground externally.
6 LO output Low side gate driver output.
7 NC unconnected No connect pin.
8 HB power_in High side supply return pin.
9 HO output High side gate driver output.
10 VB power_in High side voltage supply pin.
11 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer onsemi
Package DFN-10-EP(4x4)
Category Power Supply Chip
Pins 11

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VCC quiescent current ICCQ 0.15 0.25 mA VLIN=VHIN=0 6
VCC operating current ICCO 0.7 1 mA f = 500 kHz, CLOAD = 0 6
Boot voltage quiescent current IBQ 0.1 0.15 mA VLIN = VHIN = 0 V 6
Boot voltage operating current IBO 0.7 1 mA f = 500 kHz, CLOAD = 0 6
HB to GND quiescent current IHBQ 6 11 A VHS = VHB = 700 V 6
Input rising threshold VHIT 2.3 2.7 3.1 V 6
Input falling threshold VLIT 1 1.4 1.8 V 6
Input pulldown resistance RIN 100 175 250 k VXIN = 5 V 6
VCC ON (rising) VCCon 8.6 9.1 9.6 V VCC rising 6
VB ON (rising) VBon 8 8.5 9 V VB rising 6
Rise time LO, HO TR 8 15 ns Cload = 1000 pF 6
Fall time LO, HO TF 8 15 ns Cload = 1000 pF 7
Delay matching LI ON, HI OFF TMON 7 ns Pulse width = 1 s 7
Delay matching LI OFF, HI ON TMOFF 7 ns Pulse width = 1 s 7
Minimum input filter (NCP51530A) TFT 30 40 ns VXIN = 5 V; input pulse width above which output change occurs 7
VLI falling to VLO falling (NCP51530A) TDLFF 60 100 ns Cload = 0; minimum on/off-time to register as a valid change = 50 ns 7
VHI falling to VHO falling (NCP51530A) TDHFF 60 100 ns Cload = 0; minimum on/off-time to register as a valid change = 50 ns 7
VLI rising to VLO rising (NCP51530A) TDLRR 60 100 ns Cload = 0; minimum on/off-time to register as a valid change = 50 ns 7
VHI rising to VHO rising (NCP51530A) TDHRR 60 100 ns Cload = 0; minimum on/off-time to register as a valid change = 50 ns 7
VCC voltage VCC -0.3 20 V Referenced to GND 5
High side boot pin voltage VB -0.3 720 V Referenced to GND 5
High side floating voltage VB-VHB -0.3 20 V 5
Allowable HB slew rate dVHB/dt 50 V/ns 5
Drive input voltage VLIN, VHIN -5 V Upper limit printed as VCC + 0.3 V (expression, not numeric) 5
Junction temperature TJ(MAX) 150 °C 5
Storage temperature range TSTG -55 150 °C 5
Lead temperature soldering reflow 260 °C Reflow (SMD styles only), Pb-free versions 5
ESD capability Human Body Model 4000 V Per JESD22-A114E (AEC-Q100-002) 5
ESD capability Charge Device Model 1000 V Per JESD22-C101E (AEC-Q100-011) 5
Latchup current 150 mA Per JEDEC JESD78 5
Input voltage range VCC VCC 10 17 V 6
High side floating voltage VB-VHB 10 17 V 6
High side bridge pin voltage VHB -1 700 V 6
Operating junction temperature range TJ -40 125 °C 6
Thermal resistance junction to air, DFN10 RJA 162 °C/W Copper area 50 mm2 of 1 oz thickness, FR4 PCB (Note 5) 6
Input voltage hysteresis VIHYS 1.3 V 6
VCC hysteresis VCChys 0.5 V 6
VB hysteresis VBhyst 0.5 V 6
High side startup time Tstartup 10 s Time between VB > UVLO and 1st HO pulse 6
Low level output voltage LO VLOL 0.125 V ILO = 100 mA 6
High level output voltage LO VLOH 0.15 V ILO = −100 mA, VLOH = VCC−VLO 6
Peak source current LO ILOpullup 3.5 A VLO = 0 V 6
Peak sink current LO ILOpulldown 3 A VLO = 12 V 7
Low level output voltage HO VHOL 0.125 V IHO = 100 mA 7
High level output voltage HO VHOH 0.15 V IHO = −100 mA, VHOH = VHB−VHO 7
Peak source current HO IHOpullup 3.5 A VHO = 0 V 7
Peak sink current HO IHOpulldown 3 A VHO = 12 V 7

CAD (Adom-generated)

  • Symbol: NCP51530AMNTWG
  • Footprint: Adom_Gen:onsemi_NCP51530_387786
  • 3D model: generated to fit the land (STEP)
  • 3D model files: ncp51530amntwg-etched.step / ncp51530amntwg-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ncp51530amntwg.step / ncp51530amntwg.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (30 pp, sha256 2ff6300b5b916d0e, retrieved 2026-11-20)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land.

Datasheet PDF