3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownNCP51530AMNTWG
onsemi · Gate Drive ICs · DFN-10-EP(4x4)
NCP51530AMNTWG from onsemi, in a DFN-10-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Low side and logic supply pin. |
| 2 | HIN | input | High side input pin. |
| 3 | LIN | input | Low side input pin. |
| 4 | GND | power_in | Ground reference; the signal ground should be connected to bulk ground externally. |
| 5 | GND | power_in | Ground reference; the driver ground should be connected to bulk ground externally. |
| 6 | LO | output | Low side gate driver output. |
| 7 | NC | unconnected | No connect pin. |
| 8 | HB | power_in | High side supply return pin. |
| 9 | HO | output | High side gate driver output. |
| 10 | VB | power_in | High side voltage supply pin. |
| 11 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | DFN-10-EP(4x4) |
| Category | Power Supply Chip |
| Pins | 11 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC quiescent current | ICCQ | 0.15 | 0.25 | mA | VLIN=VHIN=0 | 6 | |
| VCC operating current | ICCO | 0.7 | 1 | mA | f = 500 kHz, CLOAD = 0 | 6 | |
| Boot voltage quiescent current | IBQ | 0.1 | 0.15 | mA | VLIN = VHIN = 0 V | 6 | |
| Boot voltage operating current | IBO | 0.7 | 1 | mA | f = 500 kHz, CLOAD = 0 | 6 | |
| HB to GND quiescent current | IHBQ | 6 | 11 | A | VHS = VHB = 700 V | 6 | |
| Input rising threshold | VHIT | 2.3 | 2.7 | 3.1 | V | 6 | |
| Input falling threshold | VLIT | 1 | 1.4 | 1.8 | V | 6 | |
| Input pulldown resistance | RIN | 100 | 175 | 250 | k | VXIN = 5 V | 6 |
| VCC ON (rising) | VCCon | 8.6 | 9.1 | 9.6 | V | VCC rising | 6 |
| VB ON (rising) | VBon | 8 | 8.5 | 9 | V | VB rising | 6 |
| Rise time LO, HO | TR | 8 | 15 | ns | Cload = 1000 pF | 6 | |
| Fall time LO, HO | TF | 8 | 15 | ns | Cload = 1000 pF | 7 | |
| Delay matching LI ON, HI OFF | TMON | 7 | ns | Pulse width = 1 s | 7 | ||
| Delay matching LI OFF, HI ON | TMOFF | 7 | ns | Pulse width = 1 s | 7 | ||
| Minimum input filter (NCP51530A) | TFT | 30 | 40 | ns | VXIN = 5 V; input pulse width above which output change occurs | 7 | |
| VLI falling to VLO falling (NCP51530A) | TDLFF | 60 | 100 | ns | Cload = 0; minimum on/off-time to register as a valid change = 50 ns | 7 | |
| VHI falling to VHO falling (NCP51530A) | TDHFF | 60 | 100 | ns | Cload = 0; minimum on/off-time to register as a valid change = 50 ns | 7 | |
| VLI rising to VLO rising (NCP51530A) | TDLRR | 60 | 100 | ns | Cload = 0; minimum on/off-time to register as a valid change = 50 ns | 7 | |
| VHI rising to VHO rising (NCP51530A) | TDHRR | 60 | 100 | ns | Cload = 0; minimum on/off-time to register as a valid change = 50 ns | 7 | |
| VCC voltage | VCC | -0.3 | 20 | V | Referenced to GND | 5 | |
| High side boot pin voltage | VB | -0.3 | 720 | V | Referenced to GND | 5 | |
| High side floating voltage | VB-VHB | -0.3 | 20 | V | 5 | ||
| Allowable HB slew rate | dVHB/dt | 50 | V/ns | 5 | |||
| Drive input voltage | VLIN, VHIN | -5 | V | Upper limit printed as VCC + 0.3 V (expression, not numeric) | 5 | ||
| Junction temperature | TJ(MAX) | 150 | °C | 5 | |||
| Storage temperature range | TSTG | -55 | 150 | °C | 5 | ||
| Lead temperature soldering reflow | 260 | °C | Reflow (SMD styles only), Pb-free versions | 5 | |||
| ESD capability Human Body Model | 4000 | V | Per JESD22-A114E (AEC-Q100-002) | 5 | |||
| ESD capability Charge Device Model | 1000 | V | Per JESD22-C101E (AEC-Q100-011) | 5 | |||
| Latchup current | 150 | mA | Per JEDEC JESD78 | 5 | |||
| Input voltage range VCC | VCC | 10 | 17 | V | 6 | ||
| High side floating voltage | VB-VHB | 10 | 17 | V | 6 | ||
| High side bridge pin voltage | VHB | -1 | 700 | V | 6 | ||
| Operating junction temperature range | TJ | -40 | 125 | °C | 6 | ||
| Thermal resistance junction to air, DFN10 | RJA | 162 | °C/W | Copper area 50 mm2 of 1 oz thickness, FR4 PCB (Note 5) | 6 | ||
| Input voltage hysteresis | VIHYS | 1.3 | V | 6 | |||
| VCC hysteresis | VCChys | 0.5 | V | 6 | |||
| VB hysteresis | VBhyst | 0.5 | V | 6 | |||
| High side startup time | Tstartup | 10 | s | Time between VB > UVLO and 1st HO pulse | 6 | ||
| Low level output voltage LO | VLOL | 0.125 | V | ILO = 100 mA | 6 | ||
| High level output voltage LO | VLOH | 0.15 | V | ILO = −100 mA, VLOH = VCC−VLO | 6 | ||
| Peak source current LO | ILOpullup | 3.5 | A | VLO = 0 V | 6 | ||
| Peak sink current LO | ILOpulldown | 3 | A | VLO = 12 V | 7 | ||
| Low level output voltage HO | VHOL | 0.125 | V | IHO = 100 mA | 7 | ||
| High level output voltage HO | VHOH | 0.15 | V | IHO = −100 mA, VHOH = VHB−VHO | 7 | ||
| Peak source current HO | IHOpullup | 3.5 | A | VHO = 0 V | 7 | ||
| Peak sink current HO | IHOpulldown | 3 | A | VHO = 12 V | 7 |
CAD (Adom-generated)
- Symbol:
NCP51530AMNTWG - Footprint:
Adom_Gen:onsemi_NCP51530_387786 - 3D model: generated to fit the land (STEP)
- 3D model files:
ncp51530amntwg-etched.step/ncp51530amntwg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ncp51530amntwg.step/ncp51530amntwg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (30 pp, sha256
2ff6300b5b916d0e, retrieved 2026-11-20) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land.