main
Ray
Publish 0.1.0
d30b355
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253
{
"slug": "ncp51402mntxg",
"version": "0.1.0",
"type": "component",
"description": "onsemi Power Management Specialized - PMIC, DFN-10-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"power management ics",
"ncp51402mntxg",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"ncp51402mntxg.kicad_sym",
"ncp51402mntxg.kicad_mod",
"ncp51402mntxg.glb",
"ncp51402mntxg.step",
"ncp51402mntxg.lbr",
"docs/hero.png",
"docs/ncp51402mntxg-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"ncp51402mntxg-hero.glb",
"ncp51402mntxg-hero.overlay.json"
],
"component": {
"mpn": "NCP51402MNTXG",
"manufacturer": "onsemi",
"package": "DFN-10-EP(3x3)",
"pin_count": 11,
"category": "Power Management ICs",
"subcategory": "Power Management Specialized - PMIC",
"datasheet": "https://www.onsemi.com/pdf/datasheet/ncp51402mntx-d.pdf",
"parts": {
"symbol": "ncp51402mntxg.kicad_sym",
"footprint": "ncp51402mntxg.kicad_mod",
"model_3d": "ncp51402mntxg-hero.glb",
"model_3d_plain": "ncp51402mntxg.glb",
"model_3d_step": "ncp51402mntxg-etched.step",
"model_3d_step_plain": "ncp51402mntxg.step",
"lbr": "ncp51402mntxg.lbr"
},
"distributor_links": {
"lcsc": "C892543"
},
"distributor_check": {
"checked_at": "2026-11-20T23:23:14Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": null,
"status": "deferred",
"error": "shared DigiKey quota guard: 930 calls left today"
},
"mouser": {
"pn": null,
"status": "quota"
}
},
"pins": [
{
"number": "1",
"name": "VRI",
"type": "input",
"description": "VTT external reference input, set to VDDQ/2 through a resistor network, with a range of 0.5 V to 1.8 V."
},
{
"number": "2",
"name": "PVCC",
"type": "power_in",
"description": "Power input internally connected to the output source MOSFET, with a recommended range of -0.1 to 3.5 V."
},
{
"number": "3",
"name": "VTT",
"type": "power_out",
"description": "Power output of the linear regulator, which sources and sinks current and has a source current limit of 3 to 4.5 A."
},
{
"number": "4",
"name": "PGND",
"type": "power_in",
"description": "Power ground internally connected to the output sink MOSFET, which must stay within ±0.3 V of GND."
},
{
"number": "5",
"name": "VTTS",
"type": "input",
"description": "VTT sense input for accurate remote feedback sensing, connected to the remote DDR termination bypass capacitors."
},
{
"number": "6",
"name": "VRO",
"type": "output",
"description": "Independent buffered VTT reference output that sources and sinks over 5 mA, connected to GND through a 0.1 µF ceramic capacitor."
},
{
"number": "7",
"name": "EN",
"type": "input",
"description": "CMOS-compatible shutdown control input, where logic high enables and logic low shuts down, connected to VDDQ for normal operation."
},
{
"number": "8",
"name": "GND",
"type": "power_in",
"description": "Common ground."
},
{
"number": "9",
"name": "PGOOD",
"type": "output",
"description": "Open-drain power-good output that goes high when VTT is within ±20% of VRO and needs a pull-up resistor."
},
{
"number": "10",
"name": "VCC",
"type": "power_in",
"description": "Analog power supply input (2.375 to 5.5 V), connected to GND through a 1-4.7 µF ceramic capacitor."
},
{
"number": "11",
"name": "THERMAL PAD",
"type": "passive",
"description": "Exposed pad for thermal connection, which must be connected to the ground plane using multiple vias for maximum power dissipation."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-sonnet-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The datasheet gives no pin number for the exposed pad. I assigned '11' as a placeholder. The pin fun; The VRO description says it sources and sinks 'over 5 mA' in the pin table, but 10 mA in the general",
"1/11 pins cited to the wrong page (name found elsewhere): ['11:THERMAL PAD@p2']"
],
"pages_sent": 8,
"cost_usd": 0.0665,
"at": "2026-11-20T23:23:07"
},
"datasheet": {
"url": "https://www.onsemi.com/pdf/datasheet/ncp51402mntx-d.pdf",
"pages": 8,
"sha256": "f070c61ee3247e8b",
"source_tier": "mfr",
"citation": "onsemi datasheet"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 11,
"described": 11,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "ncp51402mntxg.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
3.0,
2.98,
0.77
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "738e2eb45860c11759f8e4f44ab26932b7c15e4d5d6c8c9ac22ae866a3e38711",
"checked": "2026-11-20",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "ncp51402mntxg-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
3.0,
2.98,
0.77
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "dc2a189ef7455cc5fd9f4f6d6b96e55a10ee1dbc17e31dc5d162bb6dd896311d",
"checked": "2026-11-20",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"package_dims": {
"package_code": "DFN10, 3x3, 0.5P (CASE 506CL)",
"source_page": 7,
"D": {
"nom_mm": 3.0,
"range_mm": [
null,
null
]
},
"E1": {
"nom_mm": 3.0,
"range_mm": [
null,
null
]
},
"e": {
"nom_mm": 0.5,
"range_mm": [
null,
null
]
},
"A": {
"nom_mm": 0.9,
"range_mm": [
0.8,
1.0
]
},
"source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
"model_check": {
"file": "ncp51402mntxg.step",
"verdict": "PASS",
"reasons": [
"height within the datasheet's package drawing"
],
"by": "factory/package_fit.py"
}
}
}
}