main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ncp51402mntxg: viewers · Ray
ncp51402mntxg-etched.glb ncp51402mntxg: factory component page (tier=mfr) · Ray
ncp51402mntxg-etched.step ncp51402mntxg: factory component page (tier=mfr) · Ray
ncp51402mntxg-hero.glb ncp51402mntxg: hero GLB from the etched model (keeps the MPN mark) · Ray
ncp51402mntxg-hero.overlay.json ncp51402mntxg: hero GLB from the etched model (keeps the MPN mark) · Ray
ncp51402mntxg.glb Publish 0.1.0 · Ray
ncp51402mntxg.kicad_mod Publish 0.1.0 · Ray
ncp51402mntxg.kicad_sym Publish 0.1.0 · Ray
ncp51402mntxg.lbr Publish 0.1.0 · Ray
ncp51402mntxg.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 11 pins · Ray

NCP51402MNTXG

onsemi · Power Management Specialized - PMIC · DFN-10-EP(3x3)

NCP51402MNTXG from onsemi, in a DFN-10-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VRI input VTT external reference input, set to VDDQ/2 through a resistor network, with a range of 0.5 V to 1.8 V.
2 PVCC power_in Power input internally connected to the output source MOSFET, with a recommended range of -0.1 to 3.5 V.
3 VTT power_out Power output of the linear regulator, which sources and sinks current and has a source current limit of 3 to 4.5 A.
4 PGND power_in Power ground internally connected to the output sink MOSFET, which must stay within ±0.3 V of GND.
5 VTTS input VTT sense input for accurate remote feedback sensing, connected to the remote DDR termination bypass capacitors.
6 VRO output Independent buffered VTT reference output that sources and sinks over 5 mA, connected to GND through a 0.1 µF ceramic capacitor.
7 EN input CMOS-compatible shutdown control input, where logic high enables and logic low shuts down, connected to VDDQ for normal operation.
8 GND power_in Common ground.
9 PGOOD output Open-drain power-good output that goes high when VTT is within ±20% of VRO and needs a pull-up resistor.
10 VCC power_in Analog power supply input (2.375 to 5.5 V), connected to GND through a 1-4.7 µF ceramic capacitor.
11 THERMAL PAD passive Exposed pad for thermal connection, which must be connected to the ground plane using multiple vias for maximum power dissipation.

Key specifications

Parameter Value
Manufacturer onsemi
Package DFN-10-EP(3x3)
Category Power Management ICs
Pins 11

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VCC Supply Current IVCC 0.7 1 mA TA = +25°C, EN = 3.3 V, No Load 3
VCC Shutdown Current IVCC SHD 65 80 µA TA = +25°C, EN = 0 V, VRI = 0 V, No Load 3
VCC Shutdown Current (VRI > 0.4 V) IVCC SHD 200 400 µA TA = +25°C, EN = 0 V, VRI > 0.4 V, No Load 3
VCC UVLO Threshold VUVLO 2.15 2.3 2.375 V Wake-up, TA = +25°C 3
PVCC Supply Current IPVCC 1 50 µA TA = +25°C, EN = 3.3 V, No Load 3
PVCC Shutdown Current IPVCC SHD 0.1 50 µA TA = +25°C, EN = 0 V, No Load 3
VTT Output Tolerance to VRO (0.75 V) -18 18 mV -2 A < ITT < 2 A, PVCC = 1.50 V, VRO = 0.75 V 3
VTT Output Tolerance to VRO (0.60/0.675 V) -20 20 mV -2 A < ITT < 2 A, PVCC = 1.20 V, VRO = 0.60 V or PVCC = 1.35 V, VRO = 0.675 V 3
Source Current Limit 3 4.5 A VTTS = 90% * VRO 3
Sink Current Limit 3.5 5.5 A VTTS = 110% * VRO 3
VTT Rise Time 25 35 µs Enable to VTT = 95% of VRI, VTT has 100 µF ceramic cap load, VRI = 600 mV 3
Discharge MOSFET On-resistance RDIS 18 25 Ω VRI = 0 V, VTT = 0.3 V, EN = 0 V, TA = +25°C 3
VRI Voltage Range VRI 0.5 1.8 V 3
VRI UVLO Voltage VRI UVLO 360 390 435 mV VRI rising 3
VRI Hysteresis VRI HYS 60 mV 3
VRO Voltage Tolerance to VRI -15 15 mV IRO = ±10 mA, 0.6 V ≤ VRI ≤ 1.25 V 3
VRO Source Current Limit 10 40 mA VRO = 0 V 3
VRO Sink Current Limit 10 40 mA VRO = 0 V 3
PGOOD Lower Threshold -23.5 -20 -17.5 V/V with respect to VRO, values in % 3
PGOOD Upper Threshold 17.5 20 23.5 V/V with respect to VRO, values in % 3
PGOOD Hysteresis 5 % 3
PGOOD Start-up Delay 2 ms Start-up rising edge, VTTS within 15% of VRO 3
PGOOD Leakage Current 1 µA VTTS = VRI (PGOOD = True), PGOOD = VCC + 0.2 V 3
PGOOD = False Delay 10 µs VTTS is beyond ±20% PGOOD trip thresholds 3
PGOOD Output Low Voltage 0.4 V IGOOD = 4 mA 3
EN Logic High Threshold VIH 1.7 V EN Logic high 4
EN Logic Low Threshold VIL 0.3 V EN Logic low 4
EN Hysteresis Voltage VENHYS 0.5 V EN pin 4
EN Logic Leakage Current IILEAK -1 1 µA EN pin, TA = +25°C 4
Thermal Shutdown Temperature TSD 150 °C 4
Thermal Shutdown Hysteresis TSH 25 °C 4
Supply Voltage VCC VCC 2.375 5.5 V 2
VRO Voltage Range VRO -0.1 1.8 V 2
VRI Voltage Range VRI 0.5 1.8 V 2
PVCC, VTT, VTTS, EN, PGOOD Voltage Range -0.1 3.5 V 2
PGND Voltage Range PGND -0.1 0.1 V 2
Operating Free-Air Temperature TA -40 125 °C 2
VCC, PVCC, VTT, VTTS, VRI, VRO Voltage -0.3 6 V 2
EN, PGOOD Voltage -0.3 6 V 2
PGND to GND -0.3 0.3 V 2
Storage Temperature TSTG -55 150 °C 2
Operating Junction Temperature TJ 150 °C 2
ESD Capability, Human Body Model ESDHBM 2000 V 2
Power Rating at TA = 25°C 1.92 W 10-Pin DFN 2
Derating Factor above TA = 25°C 19 mW/°C 10-Pin DFN 2
Power Rating at TA = +85°C 0.79 W 10-Pin DFN 2
VTT Output DC Voltage VOS 0.75 V PVCC = 1.50 V, VRO = 0.75 V, ITT = 0 A 3
VTT Output DC Voltage VOS 0.675 V PVCC = 1.35 V, VRO = 0.675 V, ITT = 0 A 3
VTT Output DC Voltage VOS 0.6 V PVCC = 1.20 V, VRO = 0.60 V, ITT = 0 A 3
VRI Input-bias Current IRI 1 µA EN = 3.3 V 3

CAD (KiCad official)

  • Symbol: NCP51402MNTXG
  • Footprint: Package_DFN_QFN:DFN-10-1EP_3x3mm_P0.5mm_EP1.55x2.48mm
  • 3D model: DFN-10-EP(3x3) (KiCad packages3D, STEP)
  • 3D model files: ncp51402mntxg-etched.step / ncp51402mntxg-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ncp51402mntxg.step / ncp51402mntxg.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (8 pp, sha256 f070c61ee3247e8b, retrieved 2026-11-20)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF