main
Ray Publish 0.1.0 cdcb45d

NCP4318AHJDR2G

onsemi · Gate Drive ICs · SOIC-8

NCP4318AHJDR2G from onsemi, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GATE1 output Gate drive output for SR MOSFET1, with absolute maximum pin voltage of −0.3 to 17 V.
2 GND power_in Ground reference; all voltage ratings are with respect to this pin.
3 VS1 input Synchronous rectifier source sense input for SR1, recommended −0.3 to 5 V (absolute maximum −0.3 to 5.5 V).
4 VD1 input Synchronous rectifier drain sense input for SR1 (recommended −0.7 to 180 V, absolute maximum −4 to 200 V); IOFFSET1 current source flows out of this pin so an external series resistor can adjust the turn-off threshold, and it is off when VDD is under-voltage or switching is disabled in green mode.
5 VS2 input Synchronous rectifier source sense input for SR2, recommended −0.3 to 5 V (absolute maximum −0.3 to 5.5 V).
6 VD2 input Synchronous rectifier drain sense input for SR2 (recommended −0.7 to 180 V, absolute maximum −4 to 200 V); IOFFSET2 current source flows out of this pin so an external series resistor can adjust the turn-off threshold, and it is off when VDD is under-voltage or switching is disabled in green mode.
7 VDD power_in Supply voltage input, recommended 0 to 35 V (absolute maximum −0.3 to 37 V).
8 GATE2 output Gate drive output for SR MOSFET2, with absolute maximum pin voltage of −0.3 to 17 V.

Key specifications

Parameter Value
Manufacturer onsemi
Package SOIC-8
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Power supply input pin voltage VDD -0.3 37 V 4
Drain sense input pin voltage VD1, VD2 -4 200 V 4
Gate drive output pin voltage VGATE1, VGATE2 -0.3 17 V 4
Source sense input pin voltage VS1, VS2 -0.3 5.5 V 4
Source sense input dynamic voltage VS1-DYN, VS2-DYN -4 5.5 V Pulse Width = 200 ns 4
Power dissipation SOIC-8 PD 0.625 W TA = 25°C 4
Junction temperature TJ -40 150 °C 4
Storage temperature range TSTG -60 150 °C 4
Lead temperature TL 260 °C Soldering, 10 Seconds 4
ESD HBM (except VD1, VD2) ESD 3 kV Human Body Model, ANSI/ESDA/JEDEC JS-001-2012 4
ESD CDM ESD 1 kV Charged Device Model, JESD22-C101 4
Thermal resistance junction-to-ambient SOIC-8 RθJA 165 °C/W SOIC-8 (Note 3) 4
Thermal characterization parameter junction to top SOIC-8 ΨJT 22 °C/W SOIC-8 (Note 3) 4
VDD supply voltage VDD 0 35 V VDD pin to GND (Note 5) 4
Drain sense input voltage VD1, VD2 -0.7 180 V 4
Source sense input voltage VS1, VS2 -0.3 5 V 4
Operating junction temperature TJ -40 125 °C 4
Turn-on threshold VDD-ON 4 4.3 V VDD rising with 4.3 V / 1 ms 5
Turn-off threshold VDD-OFF 3.6 3.8 V VDD < VDD-OFF 5
SR gate enable threshold voltage VDD-GATE-ON 6.5 7.1 V VDD > VDD-GATE-ON 5
SR gate disable threshold voltage VDD-GATE-OFF 5 6 V VDD < VDD-GATE-OFF 5
Operating current IDD-OP1 8 10 mA fSW = 100 kHz, CGATE = 1 nF 5
Operating current IDD-OP0 6 mA fSW = 100 kHz, CGATE = 0 nF 5
Start-up current IDD-START 100 µA VDD = VDD-ON - 0.1 V 5
Operating current in green mode IDD-GREEN 100 210 µA VDD = 12 V (no VD1/2 switching), GREEN1 enable at TJ = 25°C 5
Comparator input offset voltage VOSI -1 0 1 mV 5
Drain pin leakage current IDRAIN-LKG 1 µA VD1/2 = 200 V 5
Minimum off-time tOFF-MIN 750 1150 1550 ns From VD1/2 higher than VTH-HGH, in AHD, AHJ 5
Turn-on propagation delay tON-DLY 30 80 ns From VD1/2 = -0.2 to VGATE = 1 V, when DLY_EN = 0 5
Turn-off propagation delay tOFF-DLY 30 80 ns From VD1/2 = 0.6 to VGATE = 5.7 V 5
Minimum SR conduction time to enable SR, DLY_EN = 0 tGATE-SKIP1 350 550 ns Turn-on trigger to VD1/2 rising higher than VTH-HGH, DLY_EN = 0, in AHD, AHJ 6
Adaptive minimum on time ratio, DLY_EN = 0 KTON1 43 50 57 % DLY_EN=0 & tSRCOND(n-1) = 8 µs, in AHJ 6
Upper limit of minimum on-time, DLY_EN = 0 tMIN-ON-U1 4 5 6 µs 200 ns < tMIN-ON < tMIN-ON-U1, DLY_EN = 0 6
Upper limit of minimum on-time, DLY_EN = 1 tMIN-ON-U2 2 2.5 3 µs 200 ns < tMIN-ON < tMIN-ON-U2, DLY_EN = 1 6
SR current inversion detection window ratio, DLY_EN = 0 KINV1 43 50 57 % KTON1 = KINV1, DLY_EN = 0, tINV-WIN = tMIN-ON 6
Maximum of adaptive offset current IOFFSET 285 310 335 µA VD1 = VD2 = 0 6
Non-switching period to enter green mode tGRN1-ENT 25 40 55 µs SRCOND1, 2 both low for tGRN1-ENT, in AHD, AHJ 7
Non-switching period to reset VTH-OFF and set DLY_EN tGRN2-ENT 2.5 4 5.5 µs SRCOND1, 2 both low for tGRN2-ENT, in AHD, AHJ 7
Detection window time ratio for primary shutdown protection KSD-PRI 65 70 75 % LLD = 0, tVG1(n-1) = 8 µs 7
Gate clamping voltage VGATE-MAX 9 10.5 12 V 12 V < VDD < 33 V, CGATE = 4.7 nF at TJ < TOTP1 7
Rise time tR 50 150 ns VDD = 12 V, CGATE = 3.3 nF, VGATE = 1 → 6 V at TJ = 25°C 8
Fall time tF 30 50 ns VDD = 12 V, CGATE = 3.3 nF, VGATE = 6 → 1 V at TJ = 25°C 8
Turn-on threshold VTH-ON -100 mV ROFFSET = 0 Ω (includes comparator input offset voltage) 5
Minimum turn-off threshold voltage VTH-OFF-MIN -14 mV ROFFSET = 0 Ω, in AHD, AHJ, ALGP 5
Step size of adaptive turn-off threshold VTH-OFF-STEP 4 mV ROFFSET = 0 Ω, in AHD, AHJ 5
Maximum turn-off threshold voltage VTH-OFF-MAX 110 mV ROFFSET = 0 Ω, in AHD, AHJ, ALGP 5
Reset value of turn-off threshold voltage VTH-OFF-RST -10 mV ROFFSET = 0 Ω, in AHJ, ALGP 5
Drain voltage high detect threshold VTH-HGH 0.85 V VD1/2 rising 6
Turn-on de-bounce time with additional delay tON-DLY2 240 ns DLY_EN = 1, in AHJ 5
Lower band of dead time regulation tDEAD-LBAND 170 ns From VGATE falling below VGATE-LOW, in AHD, AHJ 6
Debounce time of SR current inversion detection tINV 170 ns VGATE1/2 > 4.5 V & VD1/2 > VSRCINV for tINV, in AHD, AHJ, ALGP 7
Drain threshold for primary shutdown protection VSD-PRI 100 mV in AHD, AHJ 7
Abnormal VD sensing protection threshold VABN-VD 0.85 V VABN-VD = VTH-HGH, in AHJ 7
Over temperature protection reducing VGATE TOTP1 105 °C TJ > TOTP1 & VGATE=6.7V, in AHJ 7
Over temperature protection stopping gate operation TOTP2 140 °C TJ > TOTP2 & No gate output, in AHJ 7
Peak sourcing current of gate driver ISOURCE 1.5 A 8
Peak sinking current of gate driver ISINK 4.5 A 8

CAD (KiCad official)

  • Symbol: NCP4318AHJDR2G
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: ncp4318ahjdr2g-etched.step / ncp4318ahjdr2g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ncp4318ahjdr2g.step / ncp4318ahjdr2g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (24 pp, sha256 6e593a8dcde11a55, retrieved 2026-10-27, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF