main
History Download
Ray Publish 0.1.0 7007f6c

NCP3066MNTXG

onsemi · LED Drivers · DFN-8-EP(4x4)

NCP3066MNTXG from onsemi, in a DFN-8-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Switch Collector passive Internal Darlington switch collector, rated -0.3 to +42 V with switch current up to 1.5 A.
2 Switch Emitter passive Internal Darlington switch emitter, rated -0.6 V to VCC when the transistor is off.
3 Timing Capacitor passive Timing capacitor pin that sets the switching frequency, with pin voltage rated -0.2 to +1.4 V.
4 GND power_in Ground pin for all internal circuits; the EP flag must be tied to this pin on the PCB.
5 Comparator Inverting Input input Inverting input of the internal comparator with 235 mV threshold, rated -0.3 V to VCC.
6 VCC power_in Voltage supply pin, operating range 3.0 V to 40 V, absolute maximum 0 to +42 V.
7 Ipk Sense input Peak current sense input that monitors the voltage drop across an external resistor to limit peak current, with a 200 mV nominal threshold relative to VCC.
8 ON/OFF input ON/OFF pin; pulling it below 0.8 V or leaving it floating disables the device, and above 2.4 V (max 25 V) enables it.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer onsemi
Package DFN-8-EP(4x4)
Category Display Modules / LED Drivers / Display Drivers
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VCC supply voltage VCC 0 42 V Measured vs. Pin 4 3
Darlington switch collector voltage VSWC -0.3 42 V Pin 1 3
Darlington switch collector to emitter voltage VSWCE -0.3 42 V Pins 1-2 3
Darlington switch current ISW 1.5 A 3
Comparator inverting input voltage VCII -0.3 V Pin 5; upper limit printed as +VCC 3
Darlington switch emitter voltage (transistor OFF) VSWE -0.6 V Pin 2, transistor OFF; upper limit printed as +VCC 3
Ipk sense voltage VIPK -0.3 V Pin 7; upper limit printed as VCC+0.3 V 3
Timing capacitor pin voltage VTC -0.2 1.4 V Pin 3 3
ON/OFF pin voltage VON/OFF -0.3 25 V Printed as < VCC 3
Lead temperature soldering TSLD 260 °C 3
Storage temperature range TSTG -65 150 °C 3
Maximum junction temperature TJMAX 150 °C 3
Operating junction temperature range TJ 0 85 °C NCP3066 3
Thermal resistance junction-to-air, DFN-8 RJA 78 °C/W DFN−8 (Note 5: 35 m copper, 10 cm2 copper area) 3
Thermal resistance junction-to-case, DFN-8 RJC 14 °C/W DFN−8 3
Oscillator frequency fOSC 110 150 190 kHz VPin5 = 0 V, CT = 2.2 nF, TJ = 25°C 4
Current limit sense voltage VIPK(Sense) 165 200 235 mV TJ = 25°C (Note 7) 4
Discharge to charge current ratio IDISCHG/ICHG 5.5 6 6.5 − Pin 7 to VCC, TJ = 25°C 4
Darlington switch collector to emitter voltage drop VSWCE(DROP) 1 1.3 V ISW = 1.0 A, TJ = 25°C (Note 6) 4
Collector off-state current IC(OFF) 1 10 A VCE = 40 V 4
Threshold voltage line regulation REGLiNE -6 2 6 mV VCC = 3.0 V to 40 V 4
Input bias current ICII -1000 -100 1000 nA Vin = Vth 4
ON/OFF pin logic input level high VIH 2.2 V VOUT = 0 V, TJ = 25°C 4
ON/OFF pin logic input level high VIH 2.4 V VOUT = 0 V, TJ = 0°C to +85°C 4
ON/OFF pin logic input level low VIL 1 V VOUT = Nominal Output Voltage, TJ = 25°C 4
ON/OFF pin logic input level low VIL 0.8 V VOUT = Nominal Output Voltage, TJ = 0°C to +85°C 4
ON/OFF pin input current high IIH 15 A ON/OFF Pin = 5 V (ON), TJ = 25°C 4
ON/OFF pin input current low IIL 1 A ON/OFF Pin = 0 V (OFF), TJ = 25°C 4
ON/OFF pin minimum width TON_MIN 50 s TJ = 25°C 4
Supply current ICC 7 mA VCC = 5.0 V to 40 V, CT = 2.2 nF, Pin 7 = VCC, VPin 5 > Vth, Pin 2 = GND, remaining pins open 4
Standby quiescent current ISTBY 85 120 A ON/OFF Pin = 5.0 V (OFF), TJ = 25°C 4
Standby quiescent current ISTBY 120 A ON/OFF Pin = 5.0 V (OFF), TJ = −40°C to +125°C 4
Threshold voltage tolerance VTH -5 5 % TJ = 0°C to 85°C, nominal 235 mV 4
Threshold voltage tolerance VTH -10 10 % TJ = −40°C to +125°C, nominal 235 mV 4
Threshold voltage VTH 235 mV TJ = 25°C 4
Thermal shutdown threshold TSHD 160 °C 4
Thermal shutdown hysteresis TSHDHYS 10 °C 4

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper 4. The pins which are not defined may not be loaded by external signals. 5. 35 m copper, 10 cm2 copper area. 3

CAD (KiCad official)

  • Symbol: NCP3066MNTXG
  • Footprint: Package_DFN_QFN:DFN-8-1EP_4x4mm_P0.8mm_EP2.5x3.6mm
  • 3D model: DFN-8-EP(4x4) (KiCad packages3D, STEP)
  • 3D model files: ncp3066mntxg-etched.step / ncp3066mntxg-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ncp3066mntxg.step / ncp3066mntxg.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (20 pp, sha256 f3f39aff95d13b06, retrieved 2026-11-07, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF