main
Ray
Publish 0.1.0
1a90619
NCP3064DR2G
onsemi · DC-DC Converters · SOIC-8
NCP3064DR2G from onsemi, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Switch Collector | output | Internal Darlington switch collector; the datasheet limits VSWC to −0.3 to 42 V and the switch peak current ISW to 1.5 A. |
| 2 | Switch Emitter | output | Internal Darlington switch emitter; with the transistor off, VSWE is limited to −0.6 to VCC V (referenced to pin 4). |
| 3 | Timing Capacitor | passive | Timing capacitor connection to the oscillator input; the pin voltage VTC is limited to −0.2 to +1.4 V. |
| 4 | GND | power_in | Ground pin for all internal circuits; all maximum ratings are measured versus this pin. |
| 5 | Comparator Inverting Input | input | Inverting input of the internal comparator; VCII is limited to −0.3 V to VCC. |
| 6 | VCC | power_in | Voltage supply; the input voltage range is 3.0 V to 40 V and the absolute maximum VCC is −0.3 to 42 V. |
| 7 | Ipk Sense | input | Peak current sense input that monitors the voltage drop across an external resistor to limit the peak switch current; VIPK is limited to −0.3 V to (VCC + 0.3 V). |
| 8 | ON/OFF | input | Shutdown control: a high level enables operation, while low or floating puts the device in the low-current mode; VON/OFF is limited to −0.3 to 25 V and must stay below VCC. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOIC-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Oscillator frequency | fOSC | 110 | 150 | 190 | kHz | VPin 5 = 0 V, CT = 2.2 nF, TJ = 25°C | 4 |
| Discharge to charge current ratio | IDISCHG / ICHG | 5.5 | 6 | 6.5 | − | Pin 7 to VCC, TJ = 25°C | 4 |
| Current limit sense voltage | VIPK | 165 | 200 | 235 | mV | TJ = 25°C | 4 |
| Threshold voltage tolerance (NCP3064 column) | -1.5 | 1.5 | % | 4 | |||
| Threshold voltage line regulation | REGLINE | -6 | 2 | 6 | mV | VCC = 3.0 V to 40 V | 4 |
| Comparator input bias current | ICII | -1000 | -100 | 1000 | nA | Vin = Vth | 4 |
| ON/OFF pin logic input level high | VIH | 2.2 | V | VOUT = Nominal Output Voltage, TJ = 25°C | 4 | ||
| ON/OFF pin logic input level high | VIH | 2.4 | V | VOUT = Nominal Output Voltage, TJ = −40°C to +125°C | 4 | ||
| ON/OFF pin logic input level low | VIL | 1 | V | VOUT = 0 V, TJ = 25°C | 4 | ||
| ON/OFF pin logic input level low | VIL | 0.8 | V | VOUT = 0 V, TJ = −40°C to +125°C | 4 | ||
| ON/OFF pin input current high | IIH | 15 | µA | ON/OFF Pin = 5 V (ON), TJ = 25°C | 4 | ||
| ON/OFF pin input current low | IIL | 1 | µA | ON/OFF Pin = 0 V (OFF), TJ = 25°C | 4 | ||
| Supply current | ICC | 7 | mA | VCC = 5.0 V to 40 V, CT = 2.2 nF, Pin 7 = VCC, VPin 5 > Vth, Pin 2 = GND, remaining pins open | 4 | ||
| Standby quiescent current | ISTBY | 85 | 100 | µA | ON/OFF Pin = 0 V (OFF), TJ = 25°C | 4 | |
| Standby quiescent current | ISTBY | 100 | µA | ON/OFF Pin = 0 V (OFF), TJ = −40°C to +125°C | 4 | ||
| Darlington switch collector to emitter voltage drop | VSWCE | 1 | 1.3 | V | ISW = 1.0 A, TJ = 25°C | 4 | |
| Collector off-state current | IC(OFF) | 1 | 10 | µA | VCE = 40 V | 4 | |
| Capacitor charging current | IC | 275 | µA | Pin 7 to VCC, TJ = 25°C | 4 | ||
| Capacitor discharging current | IDISCH | 1.65 | mA | Pin 7 to VCC, TJ = 25°C | 4 | ||
| Threshold voltage | VTH | 1.25 | V | TJ = 25°C | 4 | ||
| Thermal shutdown threshold | TSHD | 160 | °C | 4 | |||
| Thermal shutdown hysteresis | TSHDHYS | 10 | °C | 4 | |||
| VCC supply voltage (absolute maximum, pin 6) | VCC | -0.3 | 42 | V | measured vs. Pin 4 | 3 | |
| Comparator inverting input voltage (pin 5) | VCII | -0.3 | V | measured vs. Pin 4; upper limit printed as VCC | 3 | ||
| Darlington switch emitter voltage, transistor off (pin 2) | VSWE | -0.6 | V | Transistor OFF; upper limit printed as VCC | 3 | ||
| Darlington switch collector voltage (pin 1) | VSWC | -0.3 | 42 | V | measured vs. Pin 4 | 3 | |
| Darlington switch collector to emitter voltage (pins 1 and 2) | VSWCE | -0.3 | 42 | V | 3 | ||
| Darlington switch peak current | ISW | 1.5 | A | 3 | |||
| Ipk sense voltage (pin 7) | VIPK | -0.3 | V | Upper limit printed as VCC + 0.3 V | 3 | ||
| Timing capacitor pin voltage (pin 3) | VTC | -0.2 | 1.4 | V | 3 | ||
| ON/OFF pin voltage | VON/OFF | -0.3 | 25 | V | Printed as (−0.3 to 25) < VCC | 3 | |
| Lead temperature soldering reflow (Pb-free, SMD) | TSLD | 260 | °C | Reflow (SMD styles only), Pb-Free versions | 3 | ||
| Storage temperature range | TSTG | -65 | 150 | °C | 3 | ||
| Maximum junction temperature | TJ MAX | 150 | °C | 3 | |||
| Operating junction temperature range (NCP3064) | TJ | 0 | 70 | °C | NCP3064 (not NCP3064B/NCV3064) | 3 | |
| Input (VCC) voltage range | VCC | 3 | 40 | V | Stated in Features as Input Voltage Range | 1 | |
| Thermal resistance junction-to-air, SOIC-8 | RJA | 180 | °C/W | 1 oz copper, 1 in² copper area | 3 | ||
| Thermal resistance junction-to-case, SOIC-8 | RJC | 45 | °C/W | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | 4. The pins which are not defined may not be loaded by external signals. 5. 1 oz copper, 1 in2 copper area. | 3 |
CAD (KiCad official)
- Symbol:
NCP3064DR2G - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
ncp3064dr2g-etched.step/ncp3064dr2g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ncp3064dr2g.step/ncp3064dr2g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (22 pp, sha256
b3aa6cf5026f88fa, retrieved 2026-10-29, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# NCP3064DR2G
**onsemi** · DC-DC Converters · SOIC-8
NCP3064DR2G from onsemi, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Switch Collector | output | Internal Darlington switch collector; the datasheet limits VSWC to −0.3 to 42 V and the switch peak current ISW to 1.5 A. |
| 2 | Switch Emitter | output | Internal Darlington switch emitter; with the transistor off, VSWE is limited to −0.6 to VCC V (referenced to pin 4). |
| 3 | Timing Capacitor | passive | Timing capacitor connection to the oscillator input; the pin voltage VTC is limited to −0.2 to +1.4 V. |
| 4 | GND | power_in | Ground pin for all internal circuits; all maximum ratings are measured versus this pin. |
| 5 | Comparator Inverting Input | input | Inverting input of the internal comparator; VCII is limited to −0.3 V to VCC. |
| 6 | VCC | power_in | Voltage supply; the input voltage range is 3.0 V to 40 V and the absolute maximum VCC is −0.3 to 42 V. |
| 7 | Ipk Sense | input | Peak current sense input that monitors the voltage drop across an external resistor to limit the peak switch current; VIPK is limited to −0.3 V to (VCC + 0.3 V). |
| 8 | ON/OFF | input | Shutdown control: a high level enables operation, while low or floating puts the device in the low-current mode; VON/OFF is limited to −0.3 to 25 V and must stay below VCC. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOIC-8 |
| Category | Power Supply Chip |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Oscillator frequency | fOSC | 110 | 150 | 190 | kHz | VPin 5 = 0 V, CT = 2.2 nF, TJ = 25°C | 4 |
| Discharge to charge current ratio | IDISCHG / ICHG | 5.5 | 6 | 6.5 | − | Pin 7 to VCC, TJ = 25°C | 4 |
| Current limit sense voltage | VIPK | 165 | 200 | 235 | mV | TJ = 25°C | 4 |
| Threshold voltage tolerance (NCP3064 column) | | -1.5 | | 1.5 | % | | 4 |
| Threshold voltage line regulation | REGLINE | -6 | 2 | 6 | mV | VCC = 3.0 V to 40 V | 4 |
| Comparator input bias current | ICII | -1000 | -100 | 1000 | nA | Vin = Vth | 4 |
| ON/OFF pin logic input level high | VIH | 2.2 | | | V | VOUT = Nominal Output Voltage, TJ = 25°C | 4 |
| ON/OFF pin logic input level high | VIH | 2.4 | | | V | VOUT = Nominal Output Voltage, TJ = −40°C to +125°C | 4 |
| ON/OFF pin logic input level low | VIL | | | 1 | V | VOUT = 0 V, TJ = 25°C | 4 |
| ON/OFF pin logic input level low | VIL | | | 0.8 | V | VOUT = 0 V, TJ = −40°C to +125°C | 4 |
| ON/OFF pin input current high | IIH | | | 15 | µA | ON/OFF Pin = 5 V (ON), TJ = 25°C | 4 |
| ON/OFF pin input current low | IIL | | | 1 | µA | ON/OFF Pin = 0 V (OFF), TJ = 25°C | 4 |
| Supply current | ICC | | | 7 | mA | VCC = 5.0 V to 40 V, CT = 2.2 nF, Pin 7 = VCC, VPin 5 > Vth, Pin 2 = GND, remaining pins open | 4 |
| Standby quiescent current | ISTBY | | 85 | 100 | µA | ON/OFF Pin = 0 V (OFF), TJ = 25°C | 4 |
| Standby quiescent current | ISTBY | | | 100 | µA | ON/OFF Pin = 0 V (OFF), TJ = −40°C to +125°C | 4 |
| Darlington switch collector to emitter voltage drop | VSWCE | | 1 | 1.3 | V | ISW = 1.0 A, TJ = 25°C | 4 |
| Collector off-state current | IC(OFF) | | 1 | 10 | µA | VCE = 40 V | 4 |
| Capacitor charging current | IC | | 275 | | µA | Pin 7 to VCC, TJ = 25°C | 4 |
| Capacitor discharging current | IDISCH | | 1.65 | | mA | Pin 7 to VCC, TJ = 25°C | 4 |
| Threshold voltage | VTH | | 1.25 | | V | TJ = 25°C | 4 |
| Thermal shutdown threshold | TSHD | | 160 | | °C | | 4 |
| Thermal shutdown hysteresis | TSHDHYS | | 10 | | °C | | 4 |
| VCC supply voltage (absolute maximum, pin 6) | VCC | -0.3 | | 42 | V | measured vs. Pin 4 | 3 |
| Comparator inverting input voltage (pin 5) | VCII | -0.3 | | | V | measured vs. Pin 4; upper limit printed as VCC | 3 |
| Darlington switch emitter voltage, transistor off (pin 2) | VSWE | -0.6 | | | V | Transistor OFF; upper limit printed as VCC | 3 |
| Darlington switch collector voltage (pin 1) | VSWC | -0.3 | | 42 | V | measured vs. Pin 4 | 3 |
| Darlington switch collector to emitter voltage (pins 1 and 2) | VSWCE | -0.3 | | 42 | V | | 3 |
| Darlington switch peak current | ISW | | | 1.5 | A | | 3 |
| Ipk sense voltage (pin 7) | VIPK | -0.3 | | | V | Upper limit printed as VCC + 0.3 V | 3 |
| Timing capacitor pin voltage (pin 3) | VTC | -0.2 | | 1.4 | V | | 3 |
| ON/OFF pin voltage | VON/OFF | -0.3 | | 25 | V | Printed as (−0.3 to 25) < VCC | 3 |
| Lead temperature soldering reflow (Pb-free, SMD) | TSLD | | | 260 | °C | Reflow (SMD styles only), Pb-Free versions | 3 |
| Storage temperature range | TSTG | -65 | | 150 | °C | | 3 |
| Maximum junction temperature | TJ MAX | | | 150 | °C | | 3 |
| Operating junction temperature range (NCP3064) | TJ | 0 | | 70 | °C | NCP3064 (not NCP3064B/NCV3064) | 3 |
| Input (VCC) voltage range | VCC | 3 | | 40 | V | Stated in Features as Input Voltage Range | 1 |
| Thermal resistance junction-to-air, SOIC-8 | RJA | | 180 | | °C/W | 1 oz copper, 1 in² copper area | 3 |
| Thermal resistance junction-to-case, SOIC-8 | RJC | | 45 | | °C/W | | 3 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | | 4. The pins which are not defined may not be loaded by external signals. 5. 1 oz copper, 1 in2 copper area. | 3 |
## CAD (KiCad official)
- Symbol: `NCP3064DR2G`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `ncp3064dr2g-etched.step` / `ncp3064dr2g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ncp3064dr2g.step` / `ncp3064dr2g.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/ncp3064-d.pdf) (22 pp, sha256 `b3aa6cf5026f88fa`, retrieved 2026-10-29, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ncp3064dr2g-datasheet.pdf)