Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

NCP3064DR2G

onsemi · DC-DC Converters · SOIC-8

NCP3064DR2G from onsemi, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Switch Collector output Internal Darlington switch collector; the datasheet limits VSWC to −0.3 to 42 V and the switch peak current ISW to 1.5 A.
2 Switch Emitter output Internal Darlington switch emitter; with the transistor off, VSWE is limited to −0.6 to VCC V (referenced to pin 4).
3 Timing Capacitor passive Timing capacitor connection to the oscillator input; the pin voltage VTC is limited to −0.2 to +1.4 V.
4 GND power_in Ground pin for all internal circuits; all maximum ratings are measured versus this pin.
5 Comparator Inverting Input input Inverting input of the internal comparator; VCII is limited to −0.3 V to VCC.
6 VCC power_in Voltage supply; the input voltage range is 3.0 V to 40 V and the absolute maximum VCC is −0.3 to 42 V.
7 Ipk Sense input Peak current sense input that monitors the voltage drop across an external resistor to limit the peak switch current; VIPK is limited to −0.3 V to (VCC + 0.3 V).
8 ON/OFF input Shutdown control: a high level enables operation, while low or floating puts the device in the low-current mode; VON/OFF is limited to −0.3 to 25 V and must stay below VCC.

Key specifications

Parameter Value
Manufacturer onsemi
Package SOIC-8
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Oscillator frequency fOSC 110 150 190 kHz VPin 5 = 0 V, CT = 2.2 nF, TJ = 25°C 4
Discharge to charge current ratio IDISCHG / ICHG 5.5 6 6.5 − Pin 7 to VCC, TJ = 25°C 4
Current limit sense voltage VIPK 165 200 235 mV TJ = 25°C 4
Threshold voltage tolerance (NCP3064 column) -1.5 1.5 % 4
Threshold voltage line regulation REGLINE -6 2 6 mV VCC = 3.0 V to 40 V 4
Comparator input bias current ICII -1000 -100 1000 nA Vin = Vth 4
ON/OFF pin logic input level high VIH 2.2 V VOUT = Nominal Output Voltage, TJ = 25°C 4
ON/OFF pin logic input level high VIH 2.4 V VOUT = Nominal Output Voltage, TJ = −40°C to +125°C 4
ON/OFF pin logic input level low VIL 1 V VOUT = 0 V, TJ = 25°C 4
ON/OFF pin logic input level low VIL 0.8 V VOUT = 0 V, TJ = −40°C to +125°C 4
ON/OFF pin input current high IIH 15 µA ON/OFF Pin = 5 V (ON), TJ = 25°C 4
ON/OFF pin input current low IIL 1 µA ON/OFF Pin = 0 V (OFF), TJ = 25°C 4
Supply current ICC 7 mA VCC = 5.0 V to 40 V, CT = 2.2 nF, Pin 7 = VCC, VPin 5 > Vth, Pin 2 = GND, remaining pins open 4
Standby quiescent current ISTBY 85 100 µA ON/OFF Pin = 0 V (OFF), TJ = 25°C 4
Standby quiescent current ISTBY 100 µA ON/OFF Pin = 0 V (OFF), TJ = −40°C to +125°C 4
Darlington switch collector to emitter voltage drop VSWCE 1 1.3 V ISW = 1.0 A, TJ = 25°C 4
Collector off-state current IC(OFF) 1 10 µA VCE = 40 V 4
Capacitor charging current IC 275 µA Pin 7 to VCC, TJ = 25°C 4
Capacitor discharging current IDISCH 1.65 mA Pin 7 to VCC, TJ = 25°C 4
Threshold voltage VTH 1.25 V TJ = 25°C 4
Thermal shutdown threshold TSHD 160 °C 4
Thermal shutdown hysteresis TSHDHYS 10 °C 4
VCC supply voltage (absolute maximum, pin 6) VCC -0.3 42 V measured vs. Pin 4 3
Comparator inverting input voltage (pin 5) VCII -0.3 V measured vs. Pin 4; upper limit printed as VCC 3
Darlington switch emitter voltage, transistor off (pin 2) VSWE -0.6 V Transistor OFF; upper limit printed as VCC 3
Darlington switch collector voltage (pin 1) VSWC -0.3 42 V measured vs. Pin 4 3
Darlington switch collector to emitter voltage (pins 1 and 2) VSWCE -0.3 42 V 3
Darlington switch peak current ISW 1.5 A 3
Ipk sense voltage (pin 7) VIPK -0.3 V Upper limit printed as VCC + 0.3 V 3
Timing capacitor pin voltage (pin 3) VTC -0.2 1.4 V 3
ON/OFF pin voltage VON/OFF -0.3 25 V Printed as (−0.3 to 25) < VCC 3
Lead temperature soldering reflow (Pb-free, SMD) TSLD 260 °C Reflow (SMD styles only), Pb-Free versions 3
Storage temperature range TSTG -65 150 °C 3
Maximum junction temperature TJ MAX 150 °C 3
Operating junction temperature range (NCP3064) TJ 0 70 °C NCP3064 (not NCP3064B/NCV3064) 3
Input (VCC) voltage range VCC 3 40 V Stated in Features as Input Voltage Range 1
Thermal resistance junction-to-air, SOIC-8 RJA 180 °C/W 1 oz copper, 1 in² copper area 3
Thermal resistance junction-to-case, SOIC-8 RJC 45 °C/W 3

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper 4. The pins which are not defined may not be loaded by external signals. 5. 1 oz copper, 1 in2 copper area. 3

CAD (KiCad official)

  • Symbol: NCP3064DR2G
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: ncp3064dr2g-etched.step / ncp3064dr2g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ncp3064dr2g.step / ncp3064dr2g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (22 pp, sha256 b3aa6cf5026f88fa, retrieved 2026-10-29, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF