main
Ray Publish 0.1.0 ae05418
{
  "slug": "ncp1681bad2r2g",
  "version": "0.1.0",
  "type": "component",
  "description": "onsemi AC-DC Controllers And Regulators, SOIC-20-NB. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "ncp1681bad2r2g",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ncp1681bad2r2g.kicad_sym",
    "ncp1681bad2r2g.kicad_mod",
    "ncp1681bad2r2g.glb",
    "ncp1681bad2r2g.step",
    "ncp1681bad2r2g.lbr",
    "docs/hero.png",
    "docs/ncp1681bad2r2g-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ncp1681bad2r2g-hero.glb",
    "ncp1681bad2r2g-hero.overlay.json"
  ],
  "component": {
    "mpn": "NCP1681BAD2R2G",
    "manufacturer": "onsemi",
    "package": "SOIC-20-NB",
    "pin_count": 18,
    "category": "Power Management (PMIC)",
    "subcategory": "AC-DC Controllers And Regulators",
    "datasheet": "https://www.onsemi.com/download/data-sheet/pdf/ncp1681-d.pdf",
    "parts": {
      "symbol": "ncp1681bad2r2g.kicad_sym",
      "footprint": "ncp1681bad2r2g.kicad_mod",
      "model_3d": "ncp1681bad2r2g-hero.glb",
      "model_3d_plain": "ncp1681bad2r2g.glb",
      "model_3d_step": "ncp1681bad2r2g-etched.step",
      "model_3d_step_plain": "ncp1681bad2r2g.step",
      "lbr": "ncp1681bad2r2g.lbr"
    },
    "distributor_links": {
      "digikey": "488-NCP1681BAD2R2GTR-ND",
      "mouser": "863-NCP1681BAD2R2G"
    },
    "distributor_check": {
      "checked_at": "2026-11-20T15:23:36Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "488-NCP1681BAD2R2GTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "863-NCP1681BAD2R2G",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "FAULT",
        "type": "input",
        "description": "Combined OVP/OTP fault pin that latches the controller when pulled above VFLT(OVP), typically 3.0 V, and disables it when pulled below VFLT(OTP), typically 0.4 V."
      },
      {
        "number": "2",
        "name": "PFCOK",
        "type": "bidirectional",
        "description": "Held low when the PFC output is out of regulation or in a fault condition, and sources a current proportional to VFB once regulation is reached; it can enable a downstream converter and be pulled low by it to force Skip/Standby mode."
      },
      {
        "number": "3",
        "name": "FB",
        "type": "input",
        "description": "Senses the PFC output voltage for loop regulation, with an absolute maximum input of 5.5 V relative to AGND."
      },
      {
        "number": "4",
        "name": "VM",
        "type": "output",
        "description": "Multiplier output that provides the voltage used for duty cycle modulation."
      },
      {
        "number": "5",
        "name": "AGND",
        "type": "power_in",
        "description": "Signal ground reference to which all Maximum Ratings voltages are measured."
      },
      {
        "number": "6",
        "name": "CS",
        "type": "input",
        "description": "Senses the inductor current upslope through current sense transformers for cycle-by-cycle current limiting, with an input voltage range of −0.3 V to 5.5 V."
      },
      {
        "number": "7",
        "name": "ZCD",
        "type": "input",
        "description": "Senses the inductor current downslope to detect demagnetization and control the synchronous (1-D) switch, with an input voltage range of −0.3 V to 5.5 V."
      },
      {
        "number": "8",
        "name": "INVPOL",
        "type": "output",
        "description": "Inverted output of the internal AC polarity detection circuit, rated −0.3 V to 14 V."
      },
      {
        "number": "9",
        "name": "SRH",
        "type": "output",
        "description": "Control signal for the high-side slow leg device, rated −0.3 V to 14 V."
      },
      {
        "number": "10",
        "name": "SRL",
        "type": "output",
        "description": "Control signal for the low-side slow leg device, rated −0.3 V to 14 V."
      },
      {
        "number": "11",
        "name": "POLARITY",
        "type": "output",
        "description": "Output of the internal AC polarity detection circuit, rated −0.3 V to 14 V."
      },
      {
        "number": "12",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground reference, with a maximum voltage of −0.3 V to +0.3 V."
      },
      {
        "number": "13",
        "name": "PWML",
        "type": "output",
        "description": "PWM logic-level output that controls the low-side fast leg switch, with a maximum voltage of 5.5 V."
      },
      {
        "number": "14",
        "name": "PWMH",
        "type": "output",
        "description": "PWM logic-level output that controls the high-side fast leg switch, with a maximum voltage of 5.5 V."
      },
      {
        "number": "15",
        "name": "VCC",
        "type": "power_in",
        "description": "IC supply pin rated −0.3 V to 30 V with respect to AGND."
      },
      {
        "number": "16",
        "name": "AUX",
        "type": "input",
        "description": "Monitors switch node resonance on the auxiliary winding to enable valley turn-on in CrM/DCM, and must be tied to GND for CCM operation (NCP1681Ax devices); input voltage −0.3 V to 5.5 V."
      },
      {
        "number": "18",
        "name": "LVSNS1",
        "type": "input",
        "description": "Low voltage input for AC line voltage monitoring, with its resistor divider connected to the AC line side of the boost inductor."
      },
      {
        "number": "20",
        "name": "LVSNS2",
        "type": "input",
        "description": "Low voltage input for AC line voltage monitoring, with its resistor divider connected to the slow leg bridge node."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Datasheet marks pins 17 and 19 as 'Removed for creepage distance' and the package drawing is titled ; The pin-connections drawing on page 1 is a top-view text rendering without printed numbers, so pin n; The PFCOK feedback gain is printed as '10 A/V' and the pulse timing values have lost their micro sym"
        ],
        "pages_sent": 11,
        "cost_usd": 0.064,
        "at": "2026-11-20T15:24:11"
      },
      "datasheet": {
        "url": "https://www.onsemi.com/download/data-sheet/pdf/ncp1681-d.pdf",
        "pages": 43,
        "sha256": "a6c997b53885e3c5",
        "source_tier": "mfr",
        "citation": "onsemi datasheet"
      },
      "cad": "Adom_Gen derived land; symbol and 3D generated",
      "pins": {
        "total": 18,
        "described": 18,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ncp1681bad2r2g.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          9.9,
          5.46,
          1.7
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "98cb47067241489ee7bbb4fc1e646945709c4c64c1ed43682fbec6945d7d1c43",
        "checked": "2026-11-20",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ncp1681bad2r2g-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          9.9,
          5.46,
          1.7
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "38707c558a9e7e5e4772b5587450aff6550b1138ef85ff65e2052a3096804056",
        "checked": "2026-11-20",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}