main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs ncp1593amntwg: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers ncp1593amntwg: viewers · Ray
ncp1593amntwg-etched.fit.json ncp1593amntwg: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ncp1593amntwg-etched.glb ncp1593amntwg: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ncp1593amntwg-etched.step ncp1593amntwg: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ncp1593amntwg.glb Publish 0.1.0 · Ray
ncp1593amntwg.kicad_mod Publish 0.1.0 · Ray
ncp1593amntwg.kicad_sym Publish 0.1.0 · Ray
ncp1593amntwg.lbr Publish 0.1.0 · Ray
ncp1593amntwg.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json ncp1593amntwg: specified limits as data (metadata.characteristics, 28 rows from the datasheet) · Ray
README.md ncp1593amntwg: specified limits as data (metadata.characteristics, 28 rows from the datasheet) · Ray

NCP1593AMNTWG

onsemi · DC-DC Converters · DFN-10-EP(3x3)

NCP1593AMNTWG from onsemi, in a DFN-10-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected No connect on the NCP1593A. May be left floating or tied to GND. (On NCP1593B this pin is an additional LX.)
2 LX power_out Switching node - drain of the internal high-side PMOS and low-side NMOS. Connect the output inductor to this pin (tie pins 2 and 3 together).
3 LX power_out Switching node - drain of the internal high-side PMOS and low-side NMOS. Connect the output inductor to this pin (tie pins 2 and 3 together).
4 PG output Power Good - open-drain output from the Power-Good comparator. High-impedance when FB voltage is within regulation (rising threshold 0.54 V typ, falling 0.51 V typ); otherwise pulled low (VRPG ≈ 130 mV at 2.5 mA).
5 EN input Enable input. Logic high (>1.4 V) turns the part on; logic low (<0.4 V) shuts it off. An internal ~1.4 µA pull-up forces the part into the enabled state when the pin is left floating.
6 FB input Feedback input to the error amplifier. Connect a resistor divider from VOUT to this pin to program the regulated output; internal reference VFB ≈ 0.6 V.
7 SS passive Soft-start. An external capacitor to GND sets the soft-start ramp time (charged by ISS ≈ 0.7 µA). Leaving the pin open uses the default 500 µs internal soft-start. (On NCP1593B this pin is NC and must be left floating.)
8 VCCA power_in Analog/internal-bias supply input (called VCC in the pin table, VCCA in the pin-connection diagram and application circuit). Bypass with a 0.1 µF ceramic capacitor to GND and tie directly to VCCP on the board. Range 4.0 V to 5.5 V.
9 VCCP power_in Power-stage supply input for the internal high-side PMOS. Tie to VCCA and bypass with input capacitance. Range 4.0 V to 5.5 V.
10 VCCP power_in Power-stage supply input for the internal high-side PMOS. Tie to VCCA and bypass with input capacitance. Range 4.0 V to 5.5 V.
EP GND power_in Exposed thermal pad - device ground and primary thermal path. Must be soldered to the PCB ground plane for proper electrical and thermal operation.

Key specifications

Parameter Value
Manufacturer onsemi
Package DFN-10-EP(3x3)
Category Power Management (PMIC)
Pins 11

Ordering variants

Same part, different packaging or reel option.

  • NCP1593AMNTWG
  • NCP1593AMNTWGBMNTWG

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Voltage Range VIN 4 5.5 V 4
VCC UVLO Threshold VUVLO 2.4 2.5 2.9 V 4
VCC Quiescent Current IINVCC 1 1.5 mA 4
VCCP Quiescent Current IINVCCP 20 50 µA 4
Shutdown Supply Current IQSHDN 1.8 3 µA 4
Reference Voltage VFB 0.591 0.6 0.609 V 4
Reference Voltage VFB 0.594 0.6 0.606 V TJ = 25°C 4
Feedback Input Bias Current IFB 10 100 nA 4
Switching Frequency fSW 0.87 1 1.13 MHz 4
High-Side MOSFET On Resistance RDSonH 90 190 mΩ IDS = 100 mA, VIN = 5.0 V 4
Low-Side MOSFET On Resistance RDSonL 60 90 mΩ IDS = 100 mA, VIN = 5.0 V 4
Power Good Rising Threshold VPGH 0.51 0.54 V 4
Power Good Falling Threshold VPHL 0.48 0.51 V 4
Power Good Pulldown Voltage VRPG 130 250 mV IPG = 2.5 mA 4
Enable Pullup Current IEN 1.4 3 µA 4
Default Soft-start Ramp Time tSS 0.5 0.58 0.65 ms SS = open; fSW = 1MHz 4
Soft-start Current ISS 0.51 0.7 0.87 A 4
Input supply pin (pins 8, 9, 10) to GND Vin -0.3 6.5 V DC 3
Input supply pin (pins 8, 9, 10) to GND, transient Vin -1 V t < 100 ns 3
LX to GND -0.7 V DC 3
LX to GND, transient -5 V t < 100 ns 3
All other pins to GND -0.3 6 V DC 3
All other pins to GND, transient -1 V t < 100 ns 3
Operating Ambient Temperature Range TA -40 85 °C 3
Operating Junction Temperature Range TJ -40 125 °C 3
Maximum Junction Temperature TJ(MAX) 150 °C 3
Storage Temperature Range TS -55 150 °C 3
Thermal Resistance Junction-to-Air RJA 68 °C/W Note 2: 1x1 inch sq. 1 oz. Cu FR-4 or G-10 board 3

CAD (KiCad official)

  • Symbol: NCP1593AMNTWG
  • Footprint: Package_DFN_QFN:DFN-10-1EP_3x3mm_P0.5mm_EP1.55x2.48mm
  • 3D model: DFN-10-EP(3x3) (KiCad packages3D, STEP)
  • 3D model files: ncp1593amntwg-etched.step / ncp1593amntwg-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ncp1593amntwg.step / ncp1593amntwg.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (14 pp, sha256 e51c579bf424fdbd, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF