← Commit history

Initial commit: component/ncp1593amntwg

Ray ·52da056494 ·
2 files changed +87
README.mdadded+53
@@ -0,0 +1,53 @@+# NCP1593AMNTWG++**onsemi** · DC-DC Converters · DFN-10-EP(3x3)++NCP1593AMNTWG from onsemi, in a DFN-10-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | NC | unconnected | No connect on the NCP1593A. May be left floating or tied to GND. (On NCP1593B this pin is an additional LX.) |+| 2 | LX | power_out | Switching node - drain of the internal high-side PMOS and low-side NMOS. Connect the output inductor to this pin (tie pins 2 and 3 together). |+| 3 | LX | power_out | Switching node - drain of the internal high-side PMOS and low-side NMOS. Connect the output inductor to this pin (tie pins 2 and 3 together). |+| 4 | PG | output | Power Good - open-drain output from the Power-Good comparator. High-impedance when FB voltage is within regulation (rising threshold 0.54 V typ, falling 0.51 V typ); otherwise pulled low (VRPG ≈ 130 mV at 2.5 mA). |+| 5 | EN | input | Enable input. Logic high (>1.4 V) turns the part on; logic low (<0.4 V) shuts it off. An internal ~1.4 µA pull-up forces the part into the enabled state when the pin is left floating. |+| 6 | FB | input | Feedback input to the error amplifier. Connect a resistor divider from VOUT to this pin to program the regulated output; internal reference VFB ≈ 0.6 V. |+| 7 | SS | passive | Soft-start. An external capacitor to GND sets the soft-start ramp time (charged by ISS ≈ 0.7 µA). Leaving the pin open uses the default 500 µs internal soft-start. (On NCP1593B this pin is NC and must be left floating.) |+| 8 | VCCA | power_in | Analog/internal-bias supply input (called VCC in the pin table, VCCA in the pin-connection diagram and application circuit). Bypass with a 0.1 µF ceramic capacitor to GND and tie directly to VCCP on the board. Range 4.0 V to 5.5 V. |+| 9 | VCCP | power_in | Power-stage supply input for the internal high-side PMOS. Tie to VCCA and bypass with input capacitance. Range 4.0 V to 5.5 V. |+| 10 | VCCP | power_in | Power-stage supply input for the internal high-side PMOS. Tie to VCCA and bypass with input capacitance. Range 4.0 V to 5.5 V. |+| EP | GND | power_in | Exposed thermal pad - device ground and primary thermal path. Must be soldered to the PCB ground plane for proper electrical and thermal operation. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | onsemi |+| Package | DFN-10-EP(3x3) |+| Category | Power Management (PMIC) |+| Pins | 11 |++## Ordering variants++Same part, different packaging or reel option.++- `NCP1593AMNTWG`+- `NCP1593AMNTWGBMNTWG`++## CAD (KiCad official)++- Symbol: `NCP1593AMNTWG`+- Footprint: `Package_DFN_QFN:DFN-10-1EP_3x3mm_P0.5mm_EP1.55x2.48mm`+- 3D model: DFN-10-EP(3x3) (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [onsemi datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589986148039614464) (14 pp, sha256 `e51c579bf424fdbd`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ncp1593amntwg-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "ncp1593amntwg",+  "version": "0.1.0",+  "type": "component",+  "description": "onsemi DC-DC Converters, DFN-10-EP(3x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power management (pmic)",+    "ncp1593amntwg"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "ncp1593amntwg.kicad_sym",+    "ncp1593amntwg.kicad_mod",+    "ncp1593amntwg.glb",+    "ncp1593amntwg.step",+    "ncp1593amntwg.lbr",+    "docs/hero.png",+    "docs/ncp1593amntwg-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file