main
Ray Publish 0.1.1 a4c516b
{
  "slug": "ncp1380ddr2g",
  "version": "0.1.1",
  "type": "component",
  "description": "onsemi AC-DC Controllers and Regulators, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "pmic",
    "ncp1380ddr2g"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ncp1380ddr2g.kicad_sym",
    "ncp1380ddr2g.kicad_mod",
    "ncp1380ddr2g.glb",
    "ncp1380ddr2g.step",
    "ncp1380ddr2g.lbr",
    "docs/hero.png",
    "docs/ncp1380ddr2g-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ncp1380ddr2g-etched.step",
    "ncp1380ddr2g-etched.glb"
  ],
  "visibility": "public",
  "author": {
    "name": "Ray"
  },
  "component": {
    "mpn": "NCP1380DDR2G",
    "manufacturer": "onsemi",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "AC-DC Controllers and Regulators",
    "datasheet": "https://www.onsemi.com/pdf/datasheet/ncp1380d-d.pdf",
    "parts": {
      "symbol": "ncp1380ddr2g.kicad_sym",
      "footprint": "ncp1380ddr2g.kicad_mod",
      "model_3d": "ncp1380ddr2g-etched.glb",
      "model_3d_plain": "ncp1380ddr2g.glb",
      "model_3d_step": "ncp1380ddr2g-etched.step",
      "model_3d_step_plain": "ncp1380ddr2g.step",
      "lbr": "ncp1380ddr2g.lbr"
    },
    "pins": [
      {
        "number": "1",
        "name": "ZCD",
        "type": "input",
        "description": "Zero Crossing Detection input - connected to the transformer auxiliary winding to detect core-reset events (55 mV typ. falling threshold, 35 mV hysteresis). Also serves as the Over Power Protection (OPP) input: a negative voltage down to -300 mV applied during on-time reduces the internal peak-current setpoint by up to 37.5%. Internally clamped (-0.7 V low / +10 V high), ±3/-2 mA max."
      },
      {
        "number": "2",
        "name": "FB",
        "type": "input",
        "description": "Feedback input from optocoupler collector for output regulation. Internally pulled up (~18 kΩ) to VDD. FB voltage sets the operating valley (1st→4th) and enters VCO frequency-foldback mode below 0.8 V (falling)/1.4 V (rising). Peak-current setpoint = VFB/4."
      },
      {
        "number": "3",
        "name": "CS",
        "type": "input",
        "description": "Current Sense input monitoring the primary MOSFET peak current via an external sense resistor. Cycle-by-cycle current limit at VILIM = 0.8 V (with 275 ns leading-edge blanking). A second faster comparator at VCS(stop) = 1.2 V (120 ns LEB) provides immediate winding-short protection."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Controller ground reference for all internal circuitry and the gate driver return."
      },
      {
        "number": "5",
        "name": "DRV",
        "type": "output",
        "description": "Gate-driver output to the external primary MOSFET. +500 mA source / -800 mA sink peak capability (RSRC ≈ 20 Ω, RSNK ≈ 12.5 Ω). Output high clamped to ~13 V typ (10.5-15.5 V), rise/fall ≈ 40/25 ns into 1 nF. Absolute max 20 V, ±1000 mA."
      },
      {
        "number": "6",
        "name": "VCC",
        "type": "power_in",
        "description": "Controller supply, fed from an auxiliary winding. VCC(on) = 17 V typ startup, VCC(off) = 9 V typ UVLO, operating up to 28 V max. Startup current ~10 µA; ICC ≈ 2.65 mA switching at 65 kHz with 1 nF DRV load. Clamped to VCC(latch) ≈ 7.2 V when latched off."
      },
      {
        "number": "7",
        "name": "Fault",
        "type": "bidirectional",
        "description": "Combined protection pin. On the D variant (this part): Brown-Out / OVP - a resistor divider from the HV bulk rail is sensed against VBO = 0.8 V (falling) with a 10 µA hysteresis source; a zener-diode injection above VOVP = 2.5 V latches the controller off. Internal clamp Rclamp ≈ 1.55 kΩ / Vclamp ≈ 1.2 V limits pin voltage; open-pin clamp 1.0-1.4 V."
      },
      {
        "number": "8",
        "name": "CT",
        "type": "passive",
        "description": "Timing-capacitor pin for VCO/frequency-foldback mode. An external capacitor (≈220 pF recommended) is charged by a 20 µA source and compared to an FB-derived threshold; when it reaches the threshold the cap is discharged and a new switching period starts. VCT(MAX) ≈ 5.4 V."
      }
    ],
    "provenance": {
      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction",
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "cad_basis": {
        "from": [
          "README CAD section (factory cad_wording)",
          ".kicad_mod model path agrees"
        ],
        "missing": []
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "distributor_links": {
      "digikey": "NCP1380DDR2GOSTR-ND",
      "mouser": "863-NCP1380DDR2G"
    },
    "distributor_check": {
      "checked_at": "2026-10-05T19:11:24Z",
      "source": "Component Ocean /api/assign-pns + lcsc_map",
      "digikey": {
        "pn": "NCP1380DDR2GOSTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "863-NCP1380DDR2G",
        "status": "found"
      }
    },
    "models_3d": [
      {
        "file": "ncp1380ddr2g.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ncp1380ddr2g-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "32ae959d80ec47217f536f60113b3df181412137bca5a5fec1da760dc47726ff",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "org": "adom"
}