← Commit history
package.json+145−4@@ -1,6 +1,6 @@ { "slug": "ncp1380ddr2g",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "onsemi AC-DC Controllers and Regulators, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [@@ -24,6 +24,147 @@ "docs/hero.png", "docs/ncp1380ddr2g-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"- ]-}+ "viewers/footprint.html",+ "ncp1380ddr2g-etched.step",+ "ncp1380ddr2g-etched.glb"+ ],+ "component": {+ "mpn": "NCP1380DDR2G",+ "manufacturer": "onsemi",+ "package": "SOIC-8",+ "pin_count": 8,+ "category": "AC-DC Controllers and Regulators",+ "datasheet": "https://www.onsemi.com/pdf/datasheet/ncp1380d-d.pdf",+ "parts": {+ "symbol": "ncp1380ddr2g.kicad_sym",+ "footprint": "ncp1380ddr2g.kicad_mod",+ "model_3d": "ncp1380ddr2g-etched.glb",+ "model_3d_plain": "ncp1380ddr2g.glb",+ "model_3d_step": "ncp1380ddr2g-etched.step",+ "model_3d_step_plain": "ncp1380ddr2g.step",+ "lbr": "ncp1380ddr2g.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "ZCD",+ "type": "input",+ "description": "Zero Crossing Detection input - connected to the transformer auxiliary winding to detect core-reset events (55 mV typ. falling threshold, 35 mV hysteresis). Also serves as the Over Power Protection (OPP) input: a negative voltage down to -300 mV applied during on-time reduces the internal peak-current setpoint by up to 37.5%. Internally clamped (-0.7 V low / +10 V high), ±3/-2 mA max."+ },+ {+ "number": "2",+ "name": "FB",+ "type": "input",+ "description": "Feedback input from optocoupler collector for output regulation. Internally pulled up (~18 kΩ) to VDD. FB voltage sets the operating valley (1st→4th) and enters VCO frequency-foldback mode below 0.8 V (falling)/1.4 V (rising). Peak-current setpoint = VFB/4."+ },+ {+ "number": "3",+ "name": "CS",+ "type": "input",+ "description": "Current Sense input monitoring the primary MOSFET peak current via an external sense resistor. Cycle-by-cycle current limit at VILIM = 0.8 V (with 275 ns leading-edge blanking). A second faster comparator at VCS(stop) = 1.2 V (120 ns LEB) provides immediate winding-short protection."+ },+ {+ "number": "4",+ "name": "GND",+ "type": "power_in",+ "description": "Controller ground reference for all internal circuitry and the gate driver return."+ },+ {+ "number": "5",+ "name": "DRV",+ "type": "output",+ "description": "Gate-driver output to the external primary MOSFET. +500 mA source / -800 mA sink peak capability (RSRC ≈ 20 Ω, RSNK ≈ 12.5 Ω). Output high clamped to ~13 V typ (10.5-15.5 V), rise/fall ≈ 40/25 ns into 1 nF. Absolute max 20 V, ±1000 mA."+ },+ {+ "number": "6",+ "name": "VCC",+ "type": "power_in",+ "description": "Controller supply, fed from an auxiliary winding. VCC(on) = 17 V typ startup, VCC(off) = 9 V typ UVLO, operating up to 28 V max. Startup current ~10 µA; ICC ≈ 2.65 mA switching at 65 kHz with 1 nF DRV load. Clamped to VCC(latch) ≈ 7.2 V when latched off."+ },+ {+ "number": "7",+ "name": "Fault",+ "type": "bidirectional",+ "description": "Combined protection pin. On the D variant (this part): Brown-Out / OVP - a resistor divider from the HV bulk rail is sensed against VBO = 0.8 V (falling) with a 10 µA hysteresis source; a zener-diode injection above VOVP = 2.5 V latches the controller off. Internal clamp Rclamp ≈ 1.55 kΩ / Vclamp ≈ 1.2 V limits pin voltage; open-pin clamp 1.0-1.4 V."+ },+ {+ "number": "8",+ "name": "CT",+ "type": "passive",+ "description": "Timing-capacitor pin for VCO/frequency-foldback mode. An external capacitor (≈220 pF recommended) is charged by a 20 µA source and compared to an FB-derived threshold; when it reaches the threshold the cap is discharged and a new switching period starts. VCT(MAX) ≈ 5.4 V."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction",+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "cad_basis": {+ "from": [+ "README CAD section (factory cad_wording)",+ ".kicad_mod model path agrees"+ ],+ "missing": []+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "distributor_links": {+ "digikey": "NCP1380DDR2GOSTR-ND",+ "mouser": "863-NCP1380DDR2G"+ },+ "distributor_check": {+ "checked_at": "2026-10-05T19:11:24Z",+ "source": "Component Ocean /api/assign-pns + lcsc_map",+ "digikey": {+ "pn": "NCP1380DDR2GOSTR-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "863-NCP1380DDR2G",+ "status": "found"+ }+ },+ "models_3d": [+ {+ "file": "ncp1380ddr2g.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 4.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "ncp1380ddr2g-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 4.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "32ae959d80ec47217f536f60113b3df181412137bca5a5fec1da760dc47726ff",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public"+}
page.json+7−7@@ -1,6 +1,6 @@ { "slug": "ncp1380ddr2g",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "onsemi AC-DC Controllers and Regulators, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [@@ -25,11 +25,10 @@ "docs/ncp1380ddr2g-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html",- "ncp1380ddr2g-etched.step"+ "ncp1380ddr2g-etched.step",+ "ncp1380ddr2g-etched.glb" ],- "visibility": {- "public": true- },+ "visibility": "public", "author": { "name": "Ray" },@@ -170,5 +169,6 @@ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ]- }-}+ },+ "org": "adom"+}