NCP1380CDR2G

{
  "schema_version": 1,
  "type": "component",
  "slug": "ncp1380cdr2g",
  "title": "NCP1380CDR2G",
  "brief": "onsemi AC-DC Controllers And Regulators, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "power management (pmic)",
    "ncp1380cdr2g",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "NCP1380CDR2G",
    "manufacturer": "onsemi",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "Power Management (PMIC)",
    "subcategory": "AC-DC Controllers And Regulators",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590912539603779584",
    "parts": {
      "symbol": "ncp1380cdr2g.kicad_sym",
      "footprint": "ncp1380cdr2g.kicad_mod",
      "model_3d": "ncp1380cdr2g-hero.glb",
      "model_3d_plain": "ncp1380cdr2g-etched.glb",
      "model_3d_step": "ncp1380cdr2g-etched.step",
      "model_3d_step_plain": "ncp1380cdr2g.step",
      "lbr": "ncp1380cdr2g.lbr"
    },
    "distributor_links": {
      "lcsc": "C463577",
      "digikey": "NCP1380CDR2GOSTR-ND",
      "mouser": "863-NCP1380CDR2G"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T05:26:51Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "NCP1380CDR2GOSTR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "863-NCP1380CDR2G",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "ZCD",
        "type": "input",
        "description": "Zero-crossing detection pin connected to the auxiliary winding to detect the core reset event, and injecting a negative voltage smaller than 0.3 V on it performs over power protection (OPP)."
      },
      {
        "number": "2",
        "name": "FB",
        "type": "input",
        "description": "Feedback pin where an optocoupler collector is hooked to allow regulation."
      },
      {
        "number": "3",
        "name": "CS",
        "type": "input",
        "description": "Current sense pin that monitors the primary peak current."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Controller ground."
      },
      {
        "number": "5",
        "name": "DRV",
        "type": "output",
        "description": "Driver output to an external MOSFET, rated for +500 mA source / −800 mA sink peak capability."
      },
      {
        "number": "6",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply pin for the controller, connected to an external auxiliary voltage; extended VCC range operation is up to 28 V."
      },
      {
        "number": "7",
        "name": "Fault",
        "type": "input",
        "description": "For version C, combines overvoltage and brown-out protection by observing the HV rail; pulling it down with an NTC or up with a zener latches the controller on an overvoltage event."
      },
      {
        "number": "8",
        "name": "CT",
        "type": "passive",
        "description": "Timing capacitor connection; a capacitor here sets the timing in foldback mode."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet gives pin functions and the device options table, but no explicit pin type classificat; Pin 7 is printed as 'Fault' in the pin table and 'FAULT' in the pin diagram. Its function changes wi; The ZCD pin description is quoted as printed, and the 0.3 V negative injection limit is the only ele"
        ],
        "pages_sent": 8,
        "cost_usd": 0.0558,
        "at": "2026-10-18T05:24:42"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590912539603779584",
        "pages": 28,
        "sha256": "60099c2945957903",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ncp1380cdr2g.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ncp1380cdr2g-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "7ec98e43f7a15edef93816f84a1bc16a520366cc26f99e66fc55c0a3f48e1177",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "onsemi",
      "Package": "SOIC-8",
      "Category": "Power Management (PMIC)",
      "Pins": "8"
    },
    "characteristics": {
      "version": 1,
      "source": "datasheet",
      "datasheet_sha256": "60099c2945957903fa6983bb448edc1bd6155ddbfbfc6dd62bd71fd1f6020afa",
      "rows": [
        {
          "name": "Supply Voltage Startup Threshold (VCC(on))",
          "symbol": "VCC(on)",
          "kind": "electrical",
          "unit": "V",
          "min": 16,
          "typ": 17,
          "max": 18,
          "conditions": "VCC increasing",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Minimum Operating Voltage (VCC(off))",
          "symbol": "VCC(off)",
          "kind": "electrical",
          "unit": "V",
          "min": 8.3,
          "typ": 9,
          "max": 9.4,
          "conditions": "VCC decreasing",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Hysteresis VCC(on) − VCC(off)",
          "symbol": "VCC(HYS)",
          "kind": "electrical",
          "unit": "V",
          "min": 7.2,
          "typ": 8,
          "max": 9.2,
          "conditions": "",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Clamped VCC when latched-off",
          "symbol": "VCC(latch)",
          "kind": "electrical",
          "unit": "V",
          "min": 6.2,
          "typ": 7.2,
          "max": 8.2,
          "conditions": "",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Startup current, FB pin open",
          "symbol": "ICC(start)",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": 10,
          "max": 20,
          "conditions": "VCC = VCC(on) − 0.5 V",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Current that discharges VCC when the controller gets latched",
          "symbol": "ICC(disch)",
          "kind": "electrical",
          "unit": "mA",
          "min": 3,
          "typ": 4,
          "max": 5,
          "conditions": "VCC = 12 V",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Current into VCC that keeps the controller latched",
          "symbol": "ICC(latch)",
          "kind": "electrical",
          "unit": "µA",
          "min": 30,
          "typ": null,
          "max": null,
          "conditions": "VCC = VCC(latch)",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Current Sense Voltage Threshold",
          "symbol": "VILIM",
          "kind": "electrical",
          "unit": "V",
          "min": 0.76,
          "typ": 0.8,
          "max": 0.84,
          "conditions": "VFB = 4 V, VCS increasing",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Leading Edge Blanking Duration for VILIM",
          "symbol": "tLEB",
          "kind": "timing",
          "unit": "ns",
          "min": 210,
          "typ": 275,
          "max": 330,
          "conditions": "Minimum on time minus tILIM",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Input Bias Current",
          "symbol": "Ibias",
          "kind": "electrical",
          "unit": "µA",
          "min": -2,
          "typ": null,
          "max": 2,
          "conditions": "DRV high",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Propagation Delay VCS > VILIM to DRV turn-off",
          "symbol": "tILIM",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": 125,
          "max": 175,
          "conditions": "VCS > VILIM to DRV turn-off",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Percentage of maximum peak current level at which VCO takes over",
          "symbol": "Ipeak(VCO)",
          "kind": "electrical",
          "unit": "%",
          "min": 15.4,
          "typ": 17.5,
          "max": 19.6,
          "conditions": "VFB = 0.4 V, VCS increasing",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Setpoint decrease for OPP",
          "symbol": "VOPP(MAX)",
          "kind": "electrical",
          "unit": "%",
          "min": 35,
          "typ": 37.5,
          "max": 40,
          "conditions": "VZCD = −300 mV, VFB = 4 V, VCS increasing",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Threshold for immediate fault protection activation",
          "symbol": "VCS(stop)",
          "kind": "electrical",
          "unit": "V",
          "min": 1.125,
          "typ": 1.2,
          "max": 1.275,
          "conditions": "",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Rise Time (10% to 90%)",
          "symbol": "tr",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": 40,
          "max": 75,
          "conditions": "CDRV = 1 nF, VDRV from 0 to 12 V",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Fall Time (90% to 10%)",
          "symbol": "tf",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": 25,
          "max": 60,
          "conditions": "CDRV = 1 nF, VDRV from 0 to 12 V",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "DRV Low Voltage",
          "symbol": "VDRV(low)",
          "kind": "electrical",
          "unit": "V",
          "min": 8.4,
          "typ": 9.1,
          "max": null,
          "conditions": "VCC = VCC(off) + 0.2 V, CDRV = 1 nF, RDRV = 33 kΩ",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "DRV High Voltage",
          "symbol": "VDRV(high)",
          "kind": "electrical",
          "unit": "V",
          "min": 10.5,
          "typ": 13,
          "max": 15.5,
          "conditions": "VCC = VCC(MAX), CDRV = 1 nF",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "ZCD threshold voltage",
          "symbol": "VZCD(TH)",
          "kind": "electrical",
          "unit": "mV",
          "min": 35,
          "typ": 55,
          "max": 90,
          "conditions": "VZCD decreasing",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "ZCD hysteresis",
          "symbol": "VZCD(HYS)",
          "kind": "electrical",
          "unit": "mV",
          "min": 15,
          "typ": 35,
          "max": 55,
          "conditions": "VZCD increasing",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Input clamp voltage, high state",
          "symbol": "VCH",
          "kind": "electrical",
          "unit": "V",
          "min": 8,
          "typ": 10,
          "max": 12,
          "conditions": "High state, Ipin1 = 3.0 mA",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Input clamp voltage, low state",
          "symbol": "VCL",
          "kind": "electrical",
          "unit": "V",
          "min": -0.9,
          "typ": -0.7,
          "max": -0.3,
          "conditions": "Low state, Ipin1 = −2.0 mA",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Propagation Delay (demagnetization input)",
          "symbol": "tDEM",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": 150,
          "max": 250,
          "conditions": "VZCD decreasing from 4 V to −0.3 V",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Blanking delay after on-time",
          "symbol": "tBLANK",
          "kind": "timing",
          "unit": "µs",
          "min": 2.3,
          "typ": 3.15,
          "max": 4,
          "conditions": "",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Timeout after last demag transition during soft-start",
          "symbol": "toutSS",
          "kind": "timing",
          "unit": "ms",
          "min": 28,
          "typ": 41,
          "max": 54,
          "conditions": "During soft-start",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Timeout after last demag transition after the end of soft-start",
          "symbol": "tout",
          "kind": "timing",
          "unit": "ms",
          "min": 5,
          "typ": 5.9,
          "max": 6.7,
          "conditions": "After the end of soft-start",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Maximum voltage on CT pin",
          "symbol": "VCT(MAX)",
          "kind": "electrical",
          "unit": "V",
          "min": 5.15,
          "typ": 5.4,
          "max": 5.65,
          "conditions": "VFB < VFB(TH)",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Source current",
          "symbol": "ICT",
          "kind": "electrical",
          "unit": "µA",
          "min": 18,
          "typ": 20,
          "max": 22,
          "conditions": "VCT = 0 V",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Minimum voltage on CT pin, discharge switch activated",
          "symbol": "VCT(MIN)",
          "kind": "electrical",
          "unit": "mV",
          "min": null,
          "typ": null,
          "max": 90,
          "conditions": "",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Internal pullup resistor",
          "symbol": "RFB(pullup)",
          "kind": "electrical",
          "unit": "kΩ",
          "min": 15,
          "typ": 18,
          "max": 22,
          "conditions": "",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Pin FB to current setpoint division ratio",
          "symbol": "Iratio",
          "kind": "electrical",
          "unit": "",
          "min": 3.8,
          "typ": 4,
          "max": 4.2,
          "conditions": "",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "FB pin threshold under which CT is clamped to VCT(MAX)",
          "symbol": "VFB(TH)",
          "kind": "electrical",
          "unit": "V",
          "min": 0.26,
          "typ": 0.3,
          "max": 0.34,
          "conditions": "",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "FB voltage where 1st valley ends and 2nd valley starts",
          "symbol": "VH2D",
          "kind": "electrical",
          "unit": "V",
          "min": 1.316,
          "typ": 1.4,
          "max": 1.484,
          "conditions": "VFB decreases",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "FB voltage where 2nd valley ends and 3rd valley starts",
          "symbol": "VH3D",
          "kind": "electrical",
          "unit": "V",
          "min": 1.128,
          "typ": 1.2,
          "max": 1.272,
          "conditions": "VFB decreases",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "FB voltage where 3rd valley ends and 4th valley starts",
          "symbol": "VH4D",
          "kind": "electrical",
          "unit": "V",
          "min": 0.846,
          "typ": 0.9,
          "max": 0.954,
          "conditions": "VFB decreases",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "FB voltage where 4th valley ends and VCO starts",
          "symbol": "VHVCOD",
          "kind": "electrical",
          "unit": "V",
          "min": 0.732,
          "typ": 0.8,
          "max": 0.828,
          "conditions": "VFB decreases",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "FB voltage where VCO ends and 4th valley starts",
          "symbol": "VHVCOI",
          "kind": "electrical",
          "unit": "V",
          "min": 1.316,
          "typ": 1.4,
          "max": 1.484,
          "conditions": "VFB increases",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "FB voltage where 4th valley ends and 3rd valley starts",
          "symbol": "VH4I",
          "kind": "electrical",
          "unit": "V",
          "min": 1.504,
          "typ": 1.6,
          "max": 1.696,
          "conditions": "VFB increases",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "FB voltage where 3rd valley ends and 2nd valley starts",
          "symbol": "VH3I",
          "kind": "electrical",
          "unit": "V",
          "min": 1.692,
          "typ": 1.8,
          "max": 1.908,
          "conditions": "VFB increases",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "FB voltage where 2nd valley ends and 1st valley starts",
          "symbol": "VH2I",
          "kind": "electrical",
          "unit": "V",
          "min": 1.88,
          "typ": 2,
          "max": 2.12,
          "conditions": "VFB increases",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Thermal Shutdown",
          "symbol": "TSHDN",
          "kind": "electrical",
          "unit": "°C",
          "min": 140,
          "typ": null,
          "max": 170,
          "conditions": "Device switching (FSW around 65 kHz)",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Overload Timer",
          "symbol": "tOVLD",
          "kind": "timing",
          "unit": "ms",
          "min": 75,
          "typ": 85,
          "max": 95,
          "conditions": "VFB = 4 V, VCS > VILIM",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Soft-start duration",
          "symbol": "tSSTART",
          "kind": "timing",
          "unit": "ms",
          "min": 2.8,
          "typ": 3.8,
          "max": 4.8,
          "conditions": "VFB = 4 V, VCS ramping up, measured from 1st DRV pulse to VCS(peak) = 90% of VILIM",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Clamp series resistor",
          "symbol": "RFault(clamp)",
          "kind": "electrical",
          "unit": "kΩ",
          "min": 1.3,
          "typ": 1.55,
          "max": 1.8,
          "conditions": "",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Fault detection level for OVP",
          "symbol": "VOVP",
          "kind": "electrical",
          "unit": "V",
          "min": 2.35,
          "typ": 2.5,
          "max": 2.65,
          "conditions": "VFault increasing",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Delay before latch confirmation",
          "symbol": "tlatch(delay)",
          "kind": "timing",
          "unit": "ms",
          "min": 22.5,
          "typ": 30,
          "max": 37.5,
          "conditions": "",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Brown-Out level",
          "symbol": "VBO",
          "kind": "electrical",
          "unit": "V",
          "min": 0.744,
          "typ": 0.8,
          "max": 0.856,
          "conditions": "VFault decreasing",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Sourced hysteresis current",
          "symbol": "IBO",
          "kind": "electrical",
          "unit": "µA",
          "min": 9,
          "typ": 10,
          "max": 11,
          "conditions": "VFault > VBO, VFault = VBO + 0.2 V",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Delay before entering and exiting Brown-out",
          "symbol": "tBO(delay)",
          "kind": "timing",
          "unit": "ms",
          "min": 22.5,
          "typ": 30,
          "max": 37.5,
          "conditions": "",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Supply Voltage (VCC) continuous maximum",
          "symbol": "VCC(MAX)",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 28,
          "conditions": "Maximum Power Supply voltage, VCC pin, continuous voltage",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Maximum current for VCC pin",
          "symbol": "ICC(MAX)",
          "kind": "absolute_maximum",
          "unit": "mA",
          "min": -30,
          "typ": null,
          "max": 30,
          "conditions": "",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Maximum driver pin voltage, DRV pin, continuous voltage",
          "symbol": "VDRV(MAX)",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 20,
          "conditions": "",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Maximum current for DRV pin",
          "symbol": "IDRV(MAX)",
          "kind": "absolute_maximum",
          "unit": "mA",
          "min": -1000,
          "typ": null,
          "max": 1000,
          "conditions": "",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Maximum voltage on low power pins (except pins DRV and VCC)",
          "symbol": "VMAX",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 10,
          "conditions": "",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Current range for low power pins (except pins ZCD, DRV and VCC)",
          "symbol": "IMAX",
          "kind": "absolute_maximum",
          "unit": "mA",
          "min": -10,
          "typ": null,
          "max": 10,
          "conditions": "",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Maximum current for ZCD pin",
          "symbol": "IZCD(MAX)",
          "kind": "absolute_maximum",
          "unit": "mA",
          "min": -2,
          "typ": null,
          "max": 3,
          "conditions": "",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Maximum Junction Temperature",
          "symbol": "TJ(MAX)",
          "kind": "thermal",
          "unit": "°C",
          "min": null,
          "typ": null,
          "max": 150,
          "conditions": "",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Operating Temperature Range",
          "symbol": "",
          "kind": "recommended_operating",
          "unit": "°C",
          "min": -40,
          "typ": null,
          "max": 125,
          "conditions": "",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Thermal Resistance Junction-to-Air",
          "symbol": "RJA",
          "kind": "thermal",
          "unit": "°C/W",
          "min": null,
          "typ": 120,
          "max": null,
          "conditions": "",
          "source_page": 6,
          "source": "datasheet"
        }
      ]
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "ncp1380cdr2g"
  ],
  "discovery_pitch": "NCP1380CDR2G (onsemi) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ncp1380cdr2g.kicad_sym",
    "ncp1380cdr2g.kicad_mod",
    "ncp1380cdr2g.glb",
    "ncp1380cdr2g.step",
    "ncp1380cdr2g.lbr",
    "docs/hero.png",
    "docs/ncp1380cdr2g-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ncp1380cdr2g-hero.glb",
    "ncp1380cdr2g-hero.overlay.json",
    "ncp1380cdr2g-etched.glb"
  ],
  "visibility": {
    "public": true
  }
}