main
Ray Publish 0.1.0 7031a73
{
  "slug": "ncp1342anacced1r2g",
  "version": "0.1.0",
  "type": "component",
  "description": "onsemi AC-DC Controllers & Regulators, SOP-10. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power supply chip",
    "ncp1342anacced1r2g",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ncp1342anacced1r2g.kicad_sym",
    "ncp1342anacced1r2g.kicad_mod",
    "ncp1342anacced1r2g.glb",
    "ncp1342anacced1r2g.step",
    "ncp1342anacced1r2g.lbr",
    "docs/hero.png",
    "docs/ncp1342anacced1r2g-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ncp1342anacced1r2g-hero.glb",
    "ncp1342anacced1r2g-hero.overlay.json",
    "ncp1342anacced1r2g-etched.glb"
  ],
  "component": {
    "mpn": "NCP1342ANACCED1R2G",
    "manufacturer": "onsemi",
    "package": "SOP-10",
    "pin_count": 10,
    "category": "Power Supply Chip",
    "subcategory": "AC-DC Controllers & Regulators",
    "datasheet": "https://www.onsemi.com/pdf/datasheet/ncp1342anacced1r2-d.pdf",
    "parts": {
      "symbol": "ncp1342anacced1r2g.kicad_sym",
      "footprint": "ncp1342anacced1r2g.kicad_mod",
      "model_3d": "ncp1342anacced1r2g-hero.glb",
      "model_3d_plain": "ncp1342anacced1r2g-etched.glb",
      "model_3d_step": "ncp1342anacced1r2g-etched.step",
      "model_3d_step_plain": "ncp1342anacced1r2g.step",
      "lbr": "ncp1342anacced1r2g.lbr"
    },
    "distributor_links": {
      "lcsc": "C3093824",
      "digikey": "488-NCP1342ANACCED1R2GTR-ND",
      "mouser": "863-P1342ANACCED1R2G"
    },
    "distributor_check": {
      "checked_at": "2026-10-29T01:34:53Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "488-NCP1342ANACCED1R2GTR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "863-P1342ANACCED1R2G",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "Fault",
        "type": "input",
        "description": "The controller enters fault mode if the voltage on this pin is pulled above or below the fault thresholds, and a precise pull-up current source allows direct interface with an NTC thermistor."
      },
      {
        "number": "2",
        "name": "FMAX",
        "type": "input",
        "description": "A resistor to ground sets the maximum switching frequency clamp, and the maximum frequency clamp is disabled if this pin is pulled above 4 V."
      },
      {
        "number": "3",
        "name": "FB",
        "type": "input",
        "description": "Feedback input for the QR flyback controller that allows direct connection to an optocoupler."
      },
      {
        "number": "4",
        "name": "ZCD/OPP",
        "type": "input",
        "description": "A resistor divider from the auxiliary winding feeds the demagnetization detection comparator and sets the OPP compensation level, with input voltage limited to −0.3 V to VCC + 0.7 V and input current limited to −2/+5 mA."
      },
      {
        "number": "5",
        "name": "CS",
        "type": "input",
        "description": "Input to the cycle-by-cycle current limit comparator."
      },
      {
        "number": "6",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference of the controller."
      },
      {
        "number": "7",
        "name": "DRV",
        "type": "output",
        "description": "Gate drive pin with high-current capability of −0.5 A / +0.8 A, suitable for driving high gate charge power MOSFETs."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Positive supply of the IC: the circuit starts when VCC exceeds 17 V and turns off below 9 V (typical), and the operating range after start-up is 9 V to 28 V (VCC maximum rating 30 V)."
      },
      {
        "number": "9",
        "name": "N/C",
        "type": "unconnected",
        "description": "Removed for creepage distance; no pin is present at this position on the package."
      },
      {
        "number": "10",
        "name": "HV",
        "type": "input",
        "description": "Input for the high-voltage startup and brownout detection circuits, which also contain the line removal detection circuit that safely discharges the X2 capacitors when the line is removed (maximum input voltage 700 V)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The requested SOP-10 package does not appear anywhere in this datasheet. The only packages given are; The SOIC-9 NB has 9 physical leads, but Table 4 numbers its pins 1 to 10 and pin 9 is removed (N/C, ; Table 3 lists the ordering rows in a layout where the package column is not clearly aligned to each "
        ],
        "pages_sent": 11,
        "cost_usd": 0.0715,
        "at": "2026-10-29T01:34:20"
      },
      "datasheet": {
        "url": "https://www.onsemi.com/pdf/datasheet/ncp1342anacced1r2-d.pdf",
        "pages": 44,
        "sha256": "c3d1b8a76d48b18a",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 10,
        "described": 10,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ncp1342anacced1r2g.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.06,
          4.9,
          1.75
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "cb39bc9025f5d878b81677c97016410225e3edcb5c1f424d93167bc7d5a28f02",
        "checked": "2026-10-29",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ncp1342anacced1r2g-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.06,
          4.9,
          1.75
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "ec5abeb3fdc5a089f96f73f9a30375c5209d610443b438da6038c8e9e5002d47",
        "checked": "2026-10-29",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "SOIC-9 NB (CASE 751BP)",
      "source_page": 43,
      "D": {
        "nom_mm": 4.9,
        "range_mm": [
          4.8,
          5.0
        ]
      },
      "E1": {
        "nom_mm": 3.9,
        "range_mm": [
          3.8,
          4.0
        ]
      },
      "E": {
        "nom_mm": 6.0,
        "range_mm": [
          5.8,
          6.2
        ]
      },
      "e": {
        "nom_mm": 1.0,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 1.5,
        "range_mm": [
          1.25,
          1.75
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "ncp1342anacced1r2g.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}