main
Ray
ncp114asn280t1g: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero
afece25
NCP114ASN280T1G
onsemi · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · TSOP-5
NCP114ASN280T1G from onsemi, in a TSOP-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input supply pin. Operating input voltage range 1.7 V to 5.5 V (abs max 6 V). A ≥1 µF ceramic (X5R/X7R) capacitor to GND is required close to this pin for stability. |
| 2 | GND | power_in | Power supply ground / reference return. |
| 3 | EN | input | Enable input. VEN > 0.9 V turns the regulator on; VEN < 0.4 V places the device in shutdown and (on 'A' variants) activates the ~100 Ω active output discharge. Has an internal ~300 nA pull-down; tie to IN if always-on operation is desired. |
| 4 | N/C | unconnected | Not internally connected. May be tied to ground to improve thermal dissipation. |
| 5 | OUT | power_out | Regulated output voltage (2.8 V nominal for the 280 option, ±1% typ). Requires a ≥1 µF ceramic (X5R/X7R) capacitor to GND close to the pin for stability; ESR should remain below 2 Ω. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | TSOP-5 |
| Category | PMIC |
| Pins | 5 |
Ordering variants
NCP114ASN280T1GNCP114ASN280T1GASN280T2GNCP114ASN280T1GAMX280TCGNCP114ASN280T1GAMX280TBGNCP114ASN280T1GBMX280TCG
CAD (KiCad official)
- Symbol:
NCP114ASN280T1G - Footprint:
Package_SO:TSOP-5_1.65x3.05mm_P0.95mm - 3D model: TSOP-5 (KiCad packages3D, STEP)
- 3D model files:
ncp114asn280t1g-etched.step/ncp114asn280t1g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ncp114asn280t1g.step/ncp114asn280t1g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (None pp, sha256
a17ed80e5357d5ec, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# NCP114ASN280T1G
**onsemi** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · TSOP-5
NCP114ASN280T1G from onsemi, in a TSOP-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input supply pin. Operating input voltage range 1.7 V to 5.5 V (abs max 6 V). A ≥1 µF ceramic (X5R/X7R) capacitor to GND is required close to this pin for stability. |
| 2 | GND | power_in | Power supply ground / reference return. |
| 3 | EN | input | Enable input. VEN > 0.9 V turns the regulator on; VEN < 0.4 V places the device in shutdown and (on 'A' variants) activates the ~100 Ω active output discharge. Has an internal ~300 nA pull-down; tie to IN if always-on operation is desired. |
| 4 | N/C | unconnected | Not internally connected. May be tied to ground to improve thermal dissipation. |
| 5 | OUT | power_out | Regulated output voltage (2.8 V nominal for the 280 option, ±1% typ). Requires a ≥1 µF ceramic (X5R/X7R) capacitor to GND close to the pin for stability; ESR should remain below 2 Ω. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | TSOP-5 |
| Category | PMIC |
| Pins | 5 |
## Ordering variants
- `NCP114ASN280T1G`
- `NCP114ASN280T1GASN280T2G`
- `NCP114ASN280T1GAMX280TCG`
- `NCP114ASN280T1GAMX280TBG`
- `NCP114ASN280T1GBMX280TCG`
## CAD (KiCad official)
- Symbol: `NCP114ASN280T1G`
- Footprint: `Package_SO:TSOP-5_1.65x3.05mm_P0.95mm`
- 3D model: TSOP-5 (KiCad packages3D, STEP)
- 3D model files: `ncp114asn280t1g-etched.step` / `ncp114asn280t1g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ncp114asn280t1g.step` / `ncp114asn280t1g.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [onsemi datasheet](docs/ncp114asn280t1g-datasheet.pdf) (None pp, sha256 `a17ed80e5357d5ec`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ncp114asn280t1g-datasheet.pdf)