main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs ncp114asn280t1g: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers ncp114asn280t1g: viewers · Ray
ncp114asn280t1g-etched.fit.json ncp114asn280t1g: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ncp114asn280t1g-etched.glb ncp114asn280t1g: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ncp114asn280t1g-etched.step ncp114asn280t1g: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ncp114asn280t1g-hero.glb Publish 0.1.1 · Ray
ncp114asn280t1g-hero.overlay.json Publish 0.1.1 · Ray
ncp114asn280t1g.glb Publish 0.1.0 · Ray
ncp114asn280t1g.kicad_mod Publish 0.1.0 · Ray
ncp114asn280t1g.kicad_sym Publish 0.1.0 · Ray
ncp114asn280t1g.lbr Publish 0.1.0 · Ray
ncp114asn280t1g.step Publish 0.1.0 · Ray
package.json Publish 0.1.2 · Ray
page.json Publish 0.1.2 · Ray
README.md ncp114asn280t1g: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray

NCP114ASN280T1G

onsemi · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · TSOP-5

NCP114ASN280T1G from onsemi, in a TSOP-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN power_in Input supply pin. Operating input voltage range 1.7 V to 5.5 V (abs max 6 V). A ≥1 µF ceramic (X5R/X7R) capacitor to GND is required close to this pin for stability.
2 GND power_in Power supply ground / reference return.
3 EN input Enable input. VEN > 0.9 V turns the regulator on; VEN < 0.4 V places the device in shutdown and (on 'A' variants) activates the ~100 Ω active output discharge. Has an internal ~300 nA pull-down; tie to IN if always-on operation is desired.
4 N/C unconnected Not internally connected. May be tied to ground to improve thermal dissipation.
5 OUT power_out Regulated output voltage (2.8 V nominal for the 280 option, ±1% typ). Requires a ≥1 µF ceramic (X5R/X7R) capacitor to GND close to the pin for stability; ESR should remain below 2 Ω.

Key specifications

Parameter Value
Manufacturer onsemi
Package TSOP-5
Category PMIC
Pins 5

Ordering variants

  • NCP114ASN280T1G
  • NCP114ASN280T1GASN280T2G
  • NCP114ASN280T1GAMX280TCG
  • NCP114ASN280T1GAMX280TBG
  • NCP114ASN280T1GBMX280TCG

CAD (KiCad official)

  • Symbol: NCP114ASN280T1G
  • Footprint: Package_SO:TSOP-5_1.65x3.05mm_P0.95mm
  • 3D model: TSOP-5 (KiCad packages3D, STEP)
  • 3D model files: ncp114asn280t1g-etched.step / ncp114asn280t1g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ncp114asn280t1g.step / ncp114asn280t1g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (None pp, sha256 a17ed80e5357d5ec, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF