main
Ray
ncp114amx300tcg: specified limits as data (metadata.characteristics, 21 rows from the datasheet)
60b7af4
NCP114AMX300TCG
onsemi · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · UDFN-4-EP(1x1)
NCP114AMX300TCG from onsemi, in a UDFN-4-EP(1x1). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | power_out | Regulated 3.0 V output pin (300 mA max). A ceramic capacitor of at least 1 uF must be connected from this pin to GND to assure loop stability. |
| 2 | GND | power_in | Power supply ground reference for the regulator. |
| 3 | EN | input | Enable input. Driving EN above 0.9 V turns the regulator on; driving EN below 0.4 V forces shutdown mode (I_DIS ~ 0.01 uA). Input current is ~0.3 uA at V_EN = 5.5 V. In the 'A' version, pulling EN low also engages the active output discharge (R_DIS ~ 100 ohm). |
| 4 | IN | power_in | Unregulated input supply (1.7 V to 5.5 V operating, 6 V absolute max). A small ceramic capacitor (1 uF typ) from IN to GND is required for stability. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | UDFN-4-EP(1x1) |
| Category | PMIC |
| Pins | 4 |
Ordering variants
Same part, different packaging or reel option.
NCP114AMX300TCGNCP114AMX300TCGSN
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Input Voltage | VIN | 1.7 | 5.5 | V | 3 | ||
| Output Voltage Accuracy | VOUT | -2 | 2 | % | -40°C ≤ TJ ≤ 85°C; VOUT > 2.0 V | 3 | |
| Line Regulation | RegLINE | 0.01 | 0.1 | %/V | VOUT + 0.5 V ≤ VIN ≤ 5.5 V (VIN ≥ 1.7 V) | 3 | |
| Load Regulation (UDFN package) | RegLOAD | 12 | 30 | mV | IOUT = 1 mA to 300 mA | 3 | |
| Load Transient | TranLOAD | -50 | 30 | mV | IOUT = 1 mA to 300 mA or 300 mA to 1 mA in 1 µs, COUT = 1 µF | 3 | |
| Dropout Voltage (UDFN package) | VDO | 145 | 220 | mV | IOUT = 300 mA, VOUT = 3.0 V | 3 | |
| Output Current Limit | ICL | 300 | 600 | mA | VOUT = 90% VOUT(nom) | 3 | |
| Ground Current | IQ | 50 | 95 | µA | IOUT = 0 mA | 3 | |
| Shutdown Current | IDIS | 0.01 | 1 | µA | VEN ≤ 0.4 V, VIN = 5.5 V | 3 | |
| EN Pin Threshold Voltage, High | VEN_HI | 0.9 | V | VEN voltage increasing | 3 | ||
| EN Pin Threshold Voltage, Low | VEN_LO | 0.4 | V | VEN voltage decreasing | 3 | ||
| EN Pin Input Current | IEN | 0.3 | 1 | µA | VEN = 5.5 V | 3 | |
| Input Voltage | VIN | -0.3 | 6 | V | 2 | ||
| Output Voltage | VOUT | -0.3 | V | Upper limit printed as VIN + 0.3 V or 6 V | 2 | ||
| Enable Input Voltage | VEN | -0.3 | 6 | V | 2 | ||
| Maximum Junction Temperature | TJ(MAX) | 150 | °C | 2 | |||
| Storage Temperature | TSTG | -55 | 150 | °C | 2 | ||
| ESD Capability, Human Body Model | ESDHBM | 2000 | V | Per EIA/JESD22-A114 (Note 2) | 2 | ||
| ESD Capability, Machine Model | ESDMM | 200 | V | Per EIA/JESD22-A115 (Note 2) | 2 | ||
| Operating Junction Temperature | TJ | -40 | 85 | °C | Performance range per Electrical Characteristics header | 3 | |
| Thermal Resistance, Junction-to-Air (UDFN4 1x1 mm) | RJA | 170 | °C/W | Single component on 1 oz FR4 PCB, 645 mm² Cu area (Note 3) | 2 |
CAD (KiCad official)
- Symbol:
NCP114AMX300TCG - Footprint:
Package_DFN_QFN:UDFN-4-1EP_1x1mm_P0.65mm_EP0.48x0.48mm - 3D model: UDFN-4-EP(1x1) (KiCad packages3D, STEP)
- 3D model files:
ncp114amx300tcg-etched.step/ncp114amx300tcg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ncp114amx300tcg.step/ncp114amx300tcg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (19 pp, sha256
e90de31adb197d95, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# NCP114AMX300TCG
**onsemi** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · UDFN-4-EP(1x1)
NCP114AMX300TCG from onsemi, in a UDFN-4-EP(1x1). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | power_out | Regulated 3.0 V output pin (300 mA max). A ceramic capacitor of at least 1 uF must be connected from this pin to GND to assure loop stability. |
| 2 | GND | power_in | Power supply ground reference for the regulator. |
| 3 | EN | input | Enable input. Driving EN above 0.9 V turns the regulator on; driving EN below 0.4 V forces shutdown mode (I_DIS ~ 0.01 uA). Input current is ~0.3 uA at V_EN = 5.5 V. In the 'A' version, pulling EN low also engages the active output discharge (R_DIS ~ 100 ohm). |
| 4 | IN | power_in | Unregulated input supply (1.7 V to 5.5 V operating, 6 V absolute max). A small ceramic capacitor (1 uF typ) from IN to GND is required for stability. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | UDFN-4-EP(1x1) |
| Category | PMIC |
| Pins | 4 |
## Ordering variants
Same part, different packaging or reel option.
- `NCP114AMX300TCG`
- `NCP114AMX300TCGSN`
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Input Voltage | VIN | 1.7 | | 5.5 | V | | 3 |
| Output Voltage Accuracy | VOUT | -2 | | 2 | % | -40°C ≤ TJ ≤ 85°C; VOUT > 2.0 V | 3 |
| Line Regulation | RegLINE | | 0.01 | 0.1 | %/V | VOUT + 0.5 V ≤ VIN ≤ 5.5 V (VIN ≥ 1.7 V) | 3 |
| Load Regulation (UDFN package) | RegLOAD | | 12 | 30 | mV | IOUT = 1 mA to 300 mA | 3 |
| Load Transient | TranLOAD | -50 | | 30 | mV | IOUT = 1 mA to 300 mA or 300 mA to 1 mA in 1 µs, COUT = 1 µF | 3 |
| Dropout Voltage (UDFN package) | VDO | | 145 | 220 | mV | IOUT = 300 mA, VOUT = 3.0 V | 3 |
| Output Current Limit | ICL | 300 | 600 | | mA | VOUT = 90% VOUT(nom) | 3 |
| Ground Current | IQ | | 50 | 95 | µA | IOUT = 0 mA | 3 |
| Shutdown Current | IDIS | | 0.01 | 1 | µA | VEN ≤ 0.4 V, VIN = 5.5 V | 3 |
| EN Pin Threshold Voltage, High | VEN_HI | 0.9 | | | V | VEN voltage increasing | 3 |
| EN Pin Threshold Voltage, Low | VEN_LO | | | 0.4 | V | VEN voltage decreasing | 3 |
| EN Pin Input Current | IEN | | 0.3 | 1 | µA | VEN = 5.5 V | 3 |
| Input Voltage | VIN | -0.3 | | 6 | V | | 2 |
| Output Voltage | VOUT | -0.3 | | | V | Upper limit printed as VIN + 0.3 V or 6 V | 2 |
| Enable Input Voltage | VEN | -0.3 | | 6 | V | | 2 |
| Maximum Junction Temperature | TJ(MAX) | | | 150 | °C | | 2 |
| Storage Temperature | TSTG | -55 | | 150 | °C | | 2 |
| ESD Capability, Human Body Model | ESDHBM | | | 2000 | V | Per EIA/JESD22-A114 (Note 2) | 2 |
| ESD Capability, Machine Model | ESDMM | | | 200 | V | Per EIA/JESD22-A115 (Note 2) | 2 |
| Operating Junction Temperature | TJ | -40 | | 85 | °C | Performance range per Electrical Characteristics header | 3 |
| Thermal Resistance, Junction-to-Air (UDFN4 1x1 mm) | RJA | | 170 | | °C/W | Single component on 1 oz FR4 PCB, 645 mm² Cu area (Note 3) | 2 |
## CAD (KiCad official)
- Symbol: `NCP114AMX300TCG`
- Footprint: `Package_DFN_QFN:UDFN-4-1EP_1x1mm_P0.65mm_EP0.48x0.48mm`
- 3D model: UDFN-4-EP(1x1) (KiCad packages3D, STEP)
- 3D model files: `ncp114amx300tcg-etched.step` / `ncp114amx300tcg-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ncp114amx300tcg.step` / `ncp114amx300tcg.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [onsemi datasheet](docs/ncp114amx300tcg-datasheet.pdf) (19 pp, sha256 `e90de31adb197d95`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ncp114amx300tcg-datasheet.pdf)