Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

NCP114AMX300TCG

onsemi · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · UDFN-4-EP(1x1)

NCP114AMX300TCG from onsemi, in a UDFN-4-EP(1x1). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT power_out Regulated 3.0 V output pin (300 mA max). A ceramic capacitor of at least 1 uF must be connected from this pin to GND to assure loop stability.
2 GND power_in Power supply ground reference for the regulator.
3 EN input Enable input. Driving EN above 0.9 V turns the regulator on; driving EN below 0.4 V forces shutdown mode (I_DIS ~ 0.01 uA). Input current is ~0.3 uA at V_EN = 5.5 V. In the 'A' version, pulling EN low also engages the active output discharge (R_DIS ~ 100 ohm).
4 IN power_in Unregulated input supply (1.7 V to 5.5 V operating, 6 V absolute max). A small ceramic capacitor (1 uF typ) from IN to GND is required for stability.

Key specifications

Parameter Value
Manufacturer onsemi
Package UDFN-4-EP(1x1)
Category PMIC
Pins 4

Ordering variants

Same part, different packaging or reel option.

  • NCP114AMX300TCG
  • NCP114AMX300TCGSN

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating Input Voltage VIN 1.7 5.5 V 3
Output Voltage Accuracy VOUT -2 2 % -40°C ≤ TJ ≤ 85°C; VOUT > 2.0 V 3
Line Regulation RegLINE 0.01 0.1 %/V VOUT + 0.5 V ≤ VIN ≤ 5.5 V (VIN ≥ 1.7 V) 3
Load Regulation (UDFN package) RegLOAD 12 30 mV IOUT = 1 mA to 300 mA 3
Load Transient TranLOAD -50 30 mV IOUT = 1 mA to 300 mA or 300 mA to 1 mA in 1 µs, COUT = 1 µF 3
Dropout Voltage (UDFN package) VDO 145 220 mV IOUT = 300 mA, VOUT = 3.0 V 3
Output Current Limit ICL 300 600 mA VOUT = 90% VOUT(nom) 3
Ground Current IQ 50 95 µA IOUT = 0 mA 3
Shutdown Current IDIS 0.01 1 µA VEN ≤ 0.4 V, VIN = 5.5 V 3
EN Pin Threshold Voltage, High VEN_HI 0.9 V VEN voltage increasing 3
EN Pin Threshold Voltage, Low VEN_LO 0.4 V VEN voltage decreasing 3
EN Pin Input Current IEN 0.3 1 µA VEN = 5.5 V 3
Input Voltage VIN -0.3 6 V 2
Output Voltage VOUT -0.3 V Upper limit printed as VIN + 0.3 V or 6 V 2
Enable Input Voltage VEN -0.3 6 V 2
Maximum Junction Temperature TJ(MAX) 150 °C 2
Storage Temperature TSTG -55 150 °C 2
ESD Capability, Human Body Model ESDHBM 2000 V Per EIA/JESD22-A114 (Note 2) 2
ESD Capability, Machine Model ESDMM 200 V Per EIA/JESD22-A115 (Note 2) 2
Operating Junction Temperature TJ -40 85 °C Performance range per Electrical Characteristics header 3
Thermal Resistance, Junction-to-Air (UDFN4 1x1 mm) RJA 170 °C/W Single component on 1 oz FR4 PCB, 645 mm² Cu area (Note 3) 2

CAD (KiCad official)

  • Symbol: NCP114AMX300TCG
  • Footprint: Package_DFN_QFN:UDFN-4-1EP_1x1mm_P0.65mm_EP0.48x0.48mm
  • 3D model: UDFN-4-EP(1x1) (KiCad packages3D, STEP)
  • 3D model files: ncp114amx300tcg-etched.step / ncp114amx300tcg-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ncp114amx300tcg.step / ncp114amx300tcg.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (19 pp, sha256 e90de31adb197d95, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF