NCP110AMX180TBG
onsemi · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · XDFN-4-EP(1x1)
NCP110AMX180TBG from onsemi, in a XDFN-4-EP(1x1). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | power_out | Regulated output voltage pin (1.8 V nominal for the 180 suffix). Must be bypassed to GND with a small 1 µF ceramic capacitor. Sources up to 200 mA with typical dropout of 65 mV at 200 mA (VOUT = 1.8 V). |
| 2 | GND | power_in | Common ground reference for the regulator. Return path for input, output, and control currents. |
| 3 | EN | input | Chip enable input. VEN < 0.2 V disables the regulator (shutdown, IDIS ~0.01 µA typ); VEN > 0.7 V enables the LDO. Internal ~0.2 µA pull-down on the pin; absolute max -0.3 V to 6 V. |
| 4 | IN | power_in | Input voltage supply pin. Operating range 1.1 V to 5.5 V (absolute max 6 V). Bypass to GND with a 1 µF ceramic capacitor close to the pin. |
| EPAD | EPAD | passive | Exposed thermal pad on the underside of the XDFN-4 package. Tie to the ground plane for improved power dissipation (RθJA reduces on adequate copper). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | XDFN-4-EP(1x1) |
| Category | PMIC |
| Pins | 5 |
Ordering variants
Same part, different packaging or reel option.
NCP110AMX180TBGNCP110AMX180TBGMU
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Input Voltage | VIN | 1.1 | 5.5 | V | 4 | ||
| Output Voltage Accuracy (VOUT(NOM) > 1.5 V) | VOUT | -2 | 2 | % | VIN = VOUT(NOM) + 0.3 V (VIN ≥ 1.1 V); VOUT(NOM) > 1.5 V | 4 | |
| Dropout Voltage | VDO | 65 | 120 | mV | VOUT(NOM) = 1.80 V, IOUT = 200 mA | 4 | |
| Output Current Limit | ICL | 225 | 300 | mA | VOUT = 90% VOUT(NOM) | 4 | |
| Short Circuit Current | ISC | 300 | mA | VOUT = 0 V | 4 | ||
| Quiescent Current | IQ | 20 | 25 | µA | IOUT = 0 mA | 4 | |
| Shutdown Current | IDIS | 0.01 | 1 | µA | VEN ≤ 0.2 V, VIN = 1.1 V | 4 | |
| EN Input Voltage High | VENH | 0.7 | V | 4 | |||
| EN Input Voltage Low | VENL | 0.2 | V | 4 | |||
| EN Pull Down Current | IEN | 0.2 | 0.5 | µA | VEN = 1.1 V | 4 | |
| Turn-On Time | tON | 120 | µs | COUT = 1 µF, from assertion of VEN to VOUT = 95% VOUT(NOM) | 4 | ||
| Line Regulation | LineReg | 0.02 | %/V | VOUT(NOM) + 0.5 V ≤ VIN ≤ 5.5 V, (VIN ≥ 1.1 V) | 4 | ||
| Load Regulation | LoadReg | 0.001 | %/mA | IOUT = 1 mA to 200 mA | 4 | ||
| Power Supply Rejection Ratio | PSRR | 90 | dB | IOUT = 20 mA, VIN = VOUT + 0.3 V, f = 100 Hz | 4 | ||
| Power Supply Rejection Ratio | PSRR | 95 | dB | IOUT = 20 mA, VIN = VOUT + 0.3 V, f = 1 kHz | 4 | ||
| Power Supply Rejection Ratio | PSRR | 85 | dB | IOUT = 20 mA, VIN = VOUT + 0.3 V, f = 10 kHz | 4 | ||
| Power Supply Rejection Ratio | PSRR | 55 | dB | IOUT = 20 mA, VIN = VOUT + 0.3 V, f = 100 kHz | 4 | ||
| Output Voltage Noise | VN | 8.8 | VRMS | f = 10 Hz to 100 kHz | 4 | ||
| Thermal Shutdown Threshold (rising) | TSDH | 160 | °C | Temperature rising | 4 | ||
| Thermal Shutdown Threshold (falling) | TSDL | 140 | °C | Temperature falling | 4 | ||
| Active Output Discharge Resistance | RDIS | 280 | Ω | VEN < 0.2 V, Version A only | 4 | ||
| Input Voltage | VIN | -0.3 | 6 | V | 3 | ||
| Output Voltage | VOUT | -0.3 | 6 | V | Upper limit VIN + 0.3 V, max. 6 V | 3 | |
| Chip Enable Input | VCE | -0.3 | 6 | V | 3 | ||
| Maximum Junction Temperature | TJ | 150 | °C | 3 | |||
| Storage Temperature | TSTG | -55 | 150 | °C | 3 | ||
| ESD Capability, Human Body Model | ESDHBM | 2000 | V | JESD22-A114 | 3 | ||
| ESD Capability, Machine Model | ESDMM | 200 | V | JESD22-A115 | 3 | ||
| Thermal Resistance, Junction-to-Air, XDFN4 | RJA | 208 | °C/W | Note 3: measured per JEDEC board, JESD51-7 | 3 | ||
| Operating Junction Temperature Range | TJ | -40 | 125 | °C | Electrical characteristics range | 4 | |
| Input Capacitor (CIN) | CIN | 1 | µF | X7R or X5R recommended | 13 | ||
| Output Capacitor (COUT) recommended value | COUT | 1 | µF | X7R or X5R dielectric | 13 | ||
| Output Capacitor (COUT) minimum effective capacitance | COUT | 0.6 | µF | Over temperature, DC bias and package size | 13 | ||
| Output Capacitor (COUT) ESR | ESR | 1.6 | Ω | Maximum ESR of COUT | 13 | ||
| Nominal Output Voltage | VOUT(NOM) | 1.8 | V | Ordering table, NCP110AMX180TBG | 15 |
CAD (KiCad official)
- Symbol:
NCP110AMX180TBG - Footprint:
Package_DFN_QFN:OnSemi_XDFN4-1EP_1.0x1.0mm_EP0.52x0.52mm - 3D model: XDFN-4-EP(1x1) (KiCad packages3D, STEP)
- 3D model files:
ncp110amx180tbg-etched.step/ncp110amx180tbg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ncp110amx180tbg.step/ncp110amx180tbg.glbare the bare package body.
3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
ncp110amx180tbg.step |
144 KB | You want the bare part, or you mark your own boards. |
ncp110amx180tbg-etched.step |
2.4 MB | You want the part with NCP110AMX180TBG already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 596 faces against 41 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (18 pp, sha256
852726895c73c069, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).