main
Ray
Set visibility: public
fc1b5d1
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305
{
"schema_version": 1,
"type": "component",
"slug": "ncn6001dtbr2g",
"title": "NCN6001DTBR2G",
"brief": "onsemi Interface - Specialized, TSSOP-20. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"version": "0.1.0",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"interface ics",
"ncn6001dtbr2g",
"factory-2.0.0",
"extractor-text"
],
"component": {
"mpn": "NCN6001DTBR2G",
"manufacturer": "onsemi",
"package": "TSSOP-20",
"pin_count": 20,
"category": "Interface ICs",
"subcategory": "Interface - Specialized",
"datasheet": "https://www.onsemi.com/pdf/datasheet/ncn6001dtbr2-d.pdf",
"parts": {
"symbol": "ncn6001dtbr2g.kicad_sym",
"footprint": "ncn6001dtbr2g.kicad_mod",
"model_3d": "ncn6001dtbr2g-hero.glb",
"model_3d_plain": "ncn6001dtbr2g.glb",
"model_3d_step": "ncn6001dtbr2g-etched.step",
"model_3d_step_plain": "ncn6001dtbr2g.step",
"lbr": "ncn6001dtbr2g.lbr"
},
"distributor_links": {
"lcsc": "C129731",
"digikey": "2832-NCN6001DTBR2GTR-ND",
"mouser": "863-NCN6001DTBR2G"
},
"distributor_check": {
"checked_at": "2026-11-21T00:29:39Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "2832-NCN6001DTBR2GTR-ND",
"status": "found"
},
"mouser": {
"pn": "863-NCN6001DTBR2G",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "I/O",
"type": "bidirectional",
"description": "Connects to the external microcontroller serial I/O line through a bidirectional level translator, with an internal pullup that is active only when the chip is selected."
},
{
"number": "2",
"name": "INT",
"type": "output",
"description": "Goes LOW to signal card insertion detected by CRD_DET, CRD_VCC overload, or card extraction, and is forced HIGH when VCC drops below 2.0 V."
},
{
"number": "3",
"name": "CLK_IN",
"type": "input",
"description": "Schmitt-trigger clock input that is translated to CRD_CLK at the same frequency or divided by 2 or 4, and the chip guarantees 50% EMV duty cycle for the 1/2 and 1/4 ratios."
},
{
"number": "4",
"name": "MOSI",
"type": "input",
"description": "SPI data input from the external microcontroller that carries the address of one of four possible chips and the programming code for the interface."
},
{
"number": "5",
"name": "CLK_SPI",
"type": "input",
"description": "SPI clock input with a Schmitt-trigger receiver that synchronizes the data transfer and is fully independent of CLK_IN."
},
{
"number": "6",
"name": "EN_RPU",
"type": "input",
"description": "Logic input that connects the I/O pullup resistor when High and disconnects it when Low, and must be tied to the correct voltage level because no pullup is built in."
},
{
"number": "7",
"name": "MISO",
"type": "output",
"description": "SPI data output that carries the interface state during the same MOSI frame, where bits b7:b5 must be discarded and an external 4.7 k pulldown may be needed in the High Z state."
},
{
"number": "8",
"name": "CS",
"type": "input",
"description": "Chip select input that synchronizes SPI communication and disables all NCN6001 functions when driven High."
},
{
"number": "9",
"name": "VCC",
"type": "power_in",
"description": "Supply input for the device, which must be bypassed to ground with a 10 µF/6.0 V capacitor, with low-ESR ceramic recommended over tantalum."
},
{
"number": "10",
"name": "Lout_L",
"type": "passive",
"description": "Low side of the DC/DC external inductor, typically 22 µH with DCR < 2.0 Ω, for a maximum 65 mA DC output load, and the inductor must handle a 450 mA peak current."
},
{
"number": "11",
"name": "PWR_GND",
"type": "power_in",
"description": "Power ground for the built-in DC/DC converter, which must be connected to the system ground together with GND pin 16."
},
{
"number": "12",
"name": "Lout_H",
"type": "passive",
"description": "High side of the DC/DC external inductor, connected to pin 10 to activate the DC/DC function together with the built-in NMOS and PMOS switches."
},
{
"number": "13",
"name": "CRD_VCC",
"type": "power_out",
"description": "Card supply output that is programmable to 1.8 V, 3.0 V or 5.0 V and must be smoothed by a 10 µF low-ESR capacitor to GND, with the DC/DC converter shut off on overload."
},
{
"number": "14",
"name": "C8/S1",
"type": "bidirectional",
"description": "Auxiliary mixed analog/digital line driven by an open-drain stage with pullup to CRD_VCC, used for synchronous card I/O or as a chip-select identification bit (MISO bit 0)."
},
{
"number": "15",
"name": "C4/S0",
"type": "bidirectional",
"description": "Auxiliary mixed analog/digital line driven by an open-drain stage with pullup to CRD_VCC, used for synchronous card I/O or as a chip-select identification bit (MISO bit 1)."
},
{
"number": "16",
"name": "GND",
"type": "power_in",
"description": "Logic and low-level analog ground that must be externally connected to PWR_GND pin 11 while keeping high current transients separate from low signal currents."
},
{
"number": "17",
"name": "CRD_CLK",
"type": "output",
"description": "Clock output to the card CLK contact with programmable FAST or SLOW rise and fall slopes, held low by an internal pulldown during CRD_VCC startup or when CRD_VCC = 0 V."
},
{
"number": "18",
"name": "CRD_DET",
"type": "input",
"description": "Card presence input with an internal pullup of about 5.0 µA that is active LOW with a programmable polarity and a built-in digital filter against voltage spikes."
},
{
"number": "19",
"name": "CRD_RST",
"type": "output",
"description": "Card RESET output from the level translator, with output current internally limited to 15 mA and held low by an internal pulldown when the card is deactivated."
},
{
"number": "20",
"name": "CRD_IO",
"type": "bidirectional",
"description": "Card serial data line with a bidirectional level translator, internal pulldown during CRD_VCC startup or when CRD_VCC = 0 V, and current internally limited to 15 mA."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The pin diagram on page 1 is scrambled in the text extraction, so pin numbers were taken from the PI"
],
"pages_sent": 8,
"cost_usd": 0.0249,
"at": "2026-11-21T00:29:30"
},
"datasheet": {
"url": "https://www.onsemi.com/pdf/datasheet/ncn6001dtbr2-d.pdf",
"pages": 33,
"sha256": "879061db33ea5753",
"source_tier": "mfr",
"citation": "onsemi datasheet"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 20,
"described": 20,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "ncn6001dtbr2g.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.4,
6.5,
1.2
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "97339947f3a7196470ec2f1d9f9b92bb2fc2ab66ad53be0cf105192585ef3c9a",
"checked": "2026-11-21",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "ncn6001dtbr2g-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.4,
6.5,
1.2
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "88a1013116db40fe63f80b32c11b3647723bbeca43ec7824de6b3782c177b656",
"checked": "2026-11-21",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"metadata": {
"specs": {
"Manufacturer": "onsemi",
"Package": "TSSOP-20",
"Category": "Interface ICs",
"Pins": "20"
},
"appearance": {
"housing": {
"quote": "1. Human Body Model, R = 1500 , C = 100 pF. 2. Absolute Maximum Rating beyond which damage to the device may occur.",
"page": 6,
"doc": "ds.pdf",
"material": "Abs"
},
"version": 1,
"datasheet_sha256": "879061db33ea57538f9474b4005dd494a969b5d390db28c7524cdc8067bd1bc6"
}
},
"variants": [],
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"ncn6001dtbr2g"
],
"discovery_pitch": "NCN6001DTBR2G (onsemi) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
"author": {
"name": "Ray"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"ncn6001dtbr2g.kicad_sym",
"ncn6001dtbr2g.kicad_mod",
"ncn6001dtbr2g.glb",
"ncn6001dtbr2g.step",
"ncn6001dtbr2g.lbr",
"docs/hero.png",
"docs/ncn6001dtbr2g-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"ncn6001dtbr2g-hero.glb",
"ncn6001dtbr2g-hero.overlay.json"
],
"visibility": {
"public": true
}
}