main
Ray Publish 0.1.0 e375b79
{
  "slug": "ncn6001dtbr2g",
  "version": "0.1.0",
  "type": "component",
  "description": "onsemi Interface - Specialized, TSSOP-20. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "interface ics",
    "ncn6001dtbr2g",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ncn6001dtbr2g.kicad_sym",
    "ncn6001dtbr2g.kicad_mod",
    "ncn6001dtbr2g.glb",
    "ncn6001dtbr2g.step",
    "ncn6001dtbr2g.lbr",
    "docs/hero.png",
    "docs/ncn6001dtbr2g-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ncn6001dtbr2g-hero.glb",
    "ncn6001dtbr2g-hero.overlay.json"
  ],
  "component": {
    "mpn": "NCN6001DTBR2G",
    "manufacturer": "onsemi",
    "package": "TSSOP-20",
    "pin_count": 20,
    "category": "Interface ICs",
    "subcategory": "Interface - Specialized",
    "datasheet": "https://www.onsemi.com/pdf/datasheet/ncn6001dtbr2-d.pdf",
    "parts": {
      "symbol": "ncn6001dtbr2g.kicad_sym",
      "footprint": "ncn6001dtbr2g.kicad_mod",
      "model_3d": "ncn6001dtbr2g-hero.glb",
      "model_3d_plain": "ncn6001dtbr2g.glb",
      "model_3d_step": "ncn6001dtbr2g-etched.step",
      "model_3d_step_plain": "ncn6001dtbr2g.step",
      "lbr": "ncn6001dtbr2g.lbr"
    },
    "distributor_links": {
      "lcsc": "C129731",
      "digikey": "2832-NCN6001DTBR2GTR-ND",
      "mouser": "863-NCN6001DTBR2G"
    },
    "distributor_check": {
      "checked_at": "2026-11-21T00:29:39Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "2832-NCN6001DTBR2GTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "863-NCN6001DTBR2G",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "I/O",
        "type": "bidirectional",
        "description": "Connects to the external microcontroller serial I/O line through a bidirectional level translator, with an internal pullup that is active only when the chip is selected."
      },
      {
        "number": "2",
        "name": "INT",
        "type": "output",
        "description": "Goes LOW to signal card insertion detected by CRD_DET, CRD_VCC overload, or card extraction, and is forced HIGH when VCC drops below 2.0 V."
      },
      {
        "number": "3",
        "name": "CLK_IN",
        "type": "input",
        "description": "Schmitt-trigger clock input that is translated to CRD_CLK at the same frequency or divided by 2 or 4, and the chip guarantees 50% EMV duty cycle for the 1/2 and 1/4 ratios."
      },
      {
        "number": "4",
        "name": "MOSI",
        "type": "input",
        "description": "SPI data input from the external microcontroller that carries the address of one of four possible chips and the programming code for the interface."
      },
      {
        "number": "5",
        "name": "CLK_SPI",
        "type": "input",
        "description": "SPI clock input with a Schmitt-trigger receiver that synchronizes the data transfer and is fully independent of CLK_IN."
      },
      {
        "number": "6",
        "name": "EN_RPU",
        "type": "input",
        "description": "Logic input that connects the I/O pullup resistor when High and disconnects it when Low, and must be tied to the correct voltage level because no pullup is built in."
      },
      {
        "number": "7",
        "name": "MISO",
        "type": "output",
        "description": "SPI data output that carries the interface state during the same MOSI frame, where bits b7:b5 must be discarded and an external 4.7 k pulldown may be needed in the High Z state."
      },
      {
        "number": "8",
        "name": "CS",
        "type": "input",
        "description": "Chip select input that synchronizes SPI communication and disables all NCN6001 functions when driven High."
      },
      {
        "number": "9",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply input for the device, which must be bypassed to ground with a 10 µF/6.0 V capacitor, with low-ESR ceramic recommended over tantalum."
      },
      {
        "number": "10",
        "name": "Lout_L",
        "type": "passive",
        "description": "Low side of the DC/DC external inductor, typically 22 µH with DCR < 2.0 Ω, for a maximum 65 mA DC output load, and the inductor must handle a 450 mA peak current."
      },
      {
        "number": "11",
        "name": "PWR_GND",
        "type": "power_in",
        "description": "Power ground for the built-in DC/DC converter, which must be connected to the system ground together with GND pin 16."
      },
      {
        "number": "12",
        "name": "Lout_H",
        "type": "passive",
        "description": "High side of the DC/DC external inductor, connected to pin 10 to activate the DC/DC function together with the built-in NMOS and PMOS switches."
      },
      {
        "number": "13",
        "name": "CRD_VCC",
        "type": "power_out",
        "description": "Card supply output that is programmable to 1.8 V, 3.0 V or 5.0 V and must be smoothed by a 10 µF low-ESR capacitor to GND, with the DC/DC converter shut off on overload."
      },
      {
        "number": "14",
        "name": "C8/S1",
        "type": "bidirectional",
        "description": "Auxiliary mixed analog/digital line driven by an open-drain stage with pullup to CRD_VCC, used for synchronous card I/O or as a chip-select identification bit (MISO bit 0)."
      },
      {
        "number": "15",
        "name": "C4/S0",
        "type": "bidirectional",
        "description": "Auxiliary mixed analog/digital line driven by an open-drain stage with pullup to CRD_VCC, used for synchronous card I/O or as a chip-select identification bit (MISO bit 1)."
      },
      {
        "number": "16",
        "name": "GND",
        "type": "power_in",
        "description": "Logic and low-level analog ground that must be externally connected to PWR_GND pin 11 while keeping high current transients separate from low signal currents."
      },
      {
        "number": "17",
        "name": "CRD_CLK",
        "type": "output",
        "description": "Clock output to the card CLK contact with programmable FAST or SLOW rise and fall slopes, held low by an internal pulldown during CRD_VCC startup or when CRD_VCC = 0 V."
      },
      {
        "number": "18",
        "name": "CRD_DET",
        "type": "input",
        "description": "Card presence input with an internal pullup of about 5.0 µA that is active LOW with a programmable polarity and a built-in digital filter against voltage spikes."
      },
      {
        "number": "19",
        "name": "CRD_RST",
        "type": "output",
        "description": "Card RESET output from the level translator, with output current internally limited to 15 mA and held low by an internal pulldown when the card is deactivated."
      },
      {
        "number": "20",
        "name": "CRD_IO",
        "type": "bidirectional",
        "description": "Card serial data line with a bidirectional level translator, internal pulldown during CRD_VCC startup or when CRD_VCC = 0 V, and current internally limited to 15 mA."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The pin diagram on page 1 is scrambled in the text extraction, so pin numbers were taken from the PI"
        ],
        "pages_sent": 8,
        "cost_usd": 0.0249,
        "at": "2026-11-21T00:29:30"
      },
      "datasheet": {
        "url": "https://www.onsemi.com/pdf/datasheet/ncn6001dtbr2-d.pdf",
        "pages": 33,
        "sha256": "879061db33ea5753",
        "source_tier": "mfr",
        "citation": "onsemi datasheet"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 20,
        "described": 20,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ncn6001dtbr2g.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          6.5,
          1.2
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "97339947f3a7196470ec2f1d9f9b92bb2fc2ab66ad53be0cf105192585ef3c9a",
        "checked": "2026-11-21",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ncn6001dtbr2g-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          6.5,
          1.2
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "88a1013116db40fe63f80b32c11b3647723bbeca43ec7824de6b3782c177b656",
        "checked": "2026-11-21",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}