main
Ray Publish 0.1.1 5ff1b32
{
  "slug": "ncl30488a2dr2g",
  "version": "0.1.1",
  "type": "component",
  "description": "onsemi LED Drivers, SOIC-7. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "led-drv",
    "ncl30488a2dr2g"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ncl30488a2dr2g.kicad_sym",
    "ncl30488a2dr2g.kicad_mod",
    "ncl30488a2dr2g.glb",
    "ncl30488a2dr2g.step",
    "ncl30488a2dr2g.lbr",
    "docs/hero.png",
    "docs/ncl30488a2dr2g-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ncl30488a2dr2g-etched.step",
    "ncl30488a2dr2g-etched.glb"
  ],
  "component": {
    "mpn": "NCL30488A2DR2G",
    "manufacturer": "onsemi",
    "package": "SOIC-7",
    "pin_count": 8,
    "category": "LED Drivers",
    "parts": {
      "symbol": "ncl30488a2dr2g.kicad_sym",
      "footprint": "ncl30488a2dr2g.kicad_mod",
      "model_3d": "ncl30488a2dr2g-etched.glb",
      "model_3d_plain": "ncl30488a2dr2g.glb",
      "model_3d_step": "ncl30488a2dr2g-etched.step",
      "model_3d_step_plain": "ncl30488a2dr2g.step",
      "lbr": "ncl30488a2dr2g.lbr"
    },
    "pins": [
      {
        "number": "1",
        "name": "COMP",
        "type": "output",
        "description": "OTA output for the CV loop. External compensation network (R1, C1, C2 type-2 compensator) attached here stabilizes the constant-voltage regulation loop. Clamped between VCV(clampL) ~0.6 V and VCV(clampH) ~4.12 V; internal divider KCOMP=4 maps VCOMP to VREFX."
      },
      {
        "number": "2",
        "name": "ZCD",
        "type": "input",
        "description": "Zero-crossing detection / Vaux sensing pin. Connects to the auxiliary winding via a resistor divider to detect core reset (valley) events and to sense the auxiliary-winding voltage for accurate primary-side output voltage regulation. Thresholds: VZCD(rising)~90 mV, VZCD(falling)~55 mV; 200 kΩ internal pull-down."
      },
      {
        "number": "3",
        "name": "CS",
        "type": "input",
        "description": "Primary peak current sense input. Monitors the voltage across the primary-side current-sense resistor for cycle-by-cycle peak current limiting (VILIM ~1.4 V) and winding/output-diode short-circuit detection (VCS(stop) ~2.0 V, 140% of VILIM). Leading-edge blanking tLEB ~345 ns."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Controller ground reference. Return for VCC supply current and reference for all pin voltages. Non-connection is detected via CS-pin ESD diode monitoring (200 µs fault window)."
      },
      {
        "number": "5",
        "name": "DRV",
        "type": "output",
        "description": "Gate driver output to the external power MOSFET. Clamped to VDRV(high) ~12 V (10-14 V) when VCC is high, otherwise follows VCC. Drive capability ~500 mA sink / 300 mA source; RSNK ~13 Ω, RSRC ~30 Ω; tr ~30 ns / tf ~20 ns (CDRV=470 pF)."
      },
      {
        "number": "6",
        "name": "VCC",
        "type": "power_in",
        "description": "Controller supply pin, fed from an external auxiliary winding once running. Startup VCC(on) ~18 V, UVLO VCC(off) ~10.2 V, VCC(OVP) ~26.5 V, absolute max 30 V. Operating current: ~1.35 mA disabled, ~3.0-3.5 mA switching at 65 kHz."
      },
      {
        "number": "7",
        "name": "NC",
        "type": "unconnected",
        "description": "No connect; pin removed for high-voltage creepage between the HV pin (pin 8) and the low-voltage pins. Package is a SOIC-7 (SOIC-8 body with pin 7 omitted)."
      },
      {
        "number": "8",
        "name": "HV",
        "type": "input",
        "description": "High-voltage sensing / startup pin. Connects after the diode bridge (up to 700 V absolute max) to provide the internal high-voltage startup current source (IHV(start1) ~300 µA, IHV(start2) ~5.1 mA) and to sense the rectified line for PFC shaping, brown-out (~108 V on / ~98 V off), and line OVP (~469 V trip, ~443 V reset)."
      }
    ],
    "provenance": {
      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction",
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "cad_basis": {
        "from": [
          "README CAD section (factory cad_wording)",
          ".kicad_mod model path agrees"
        ],
        "missing": []
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "distributor_links": {
      "lcsc": "C904364",
      "digikey": "488-NCL30488A2DR2GTR-ND",
      "mouser": "863-NCL30488A2DR2G"
    },
    "distributor_check": {
      "checked_at": "2026-10-05T19:11:12Z",
      "source": "Component Ocean /api/assign-pns + lcsc_map",
      "digikey": {
        "pn": "488-NCL30488A2DR2GTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "863-NCL30488A2DR2G",
        "status": "found"
      }
    },
    "models_3d": [
      {
        "file": "ncl30488a2dr2g.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5.4,
          4.9,
          1.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "4c9435ffd3683a4ae45655e397c25900eda4f6782a526780f4f7b7b99a32dca7",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ncl30488a2dr2g-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5.4,
          4.9,
          1.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "96845d2c8b92ab87d43093e024eacf8eeb6c15ee0f79002ceeac2ae775e091de",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "visibility": "public"
}