← Commit history
package.json+145−4@@ -1,6 +1,6 @@ { "slug": "ncl30488a2dr2g",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "onsemi LED Drivers, SOIC-7. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [@@ -24,6 +24,147 @@ "docs/hero.png", "docs/ncl30488a2dr2g-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"- ]-}+ "viewers/footprint.html",+ "ncl30488a2dr2g-etched.step",+ "ncl30488a2dr2g-etched.glb"+ ],+ "component": {+ "mpn": "NCL30488A2DR2G",+ "manufacturer": "onsemi",+ "package": "SOIC-7",+ "pin_count": 8,+ "category": "LED Drivers",+ "parts": {+ "symbol": "ncl30488a2dr2g.kicad_sym",+ "footprint": "ncl30488a2dr2g.kicad_mod",+ "model_3d": "ncl30488a2dr2g-etched.glb",+ "model_3d_plain": "ncl30488a2dr2g.glb",+ "model_3d_step": "ncl30488a2dr2g-etched.step",+ "model_3d_step_plain": "ncl30488a2dr2g.step",+ "lbr": "ncl30488a2dr2g.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "COMP",+ "type": "output",+ "description": "OTA output for the CV loop. External compensation network (R1, C1, C2 type-2 compensator) attached here stabilizes the constant-voltage regulation loop. Clamped between VCV(clampL) ~0.6 V and VCV(clampH) ~4.12 V; internal divider KCOMP=4 maps VCOMP to VREFX."+ },+ {+ "number": "2",+ "name": "ZCD",+ "type": "input",+ "description": "Zero-crossing detection / Vaux sensing pin. Connects to the auxiliary winding via a resistor divider to detect core reset (valley) events and to sense the auxiliary-winding voltage for accurate primary-side output voltage regulation. Thresholds: VZCD(rising)~90 mV, VZCD(falling)~55 mV; 200 kΩ internal pull-down."+ },+ {+ "number": "3",+ "name": "CS",+ "type": "input",+ "description": "Primary peak current sense input. Monitors the voltage across the primary-side current-sense resistor for cycle-by-cycle peak current limiting (VILIM ~1.4 V) and winding/output-diode short-circuit detection (VCS(stop) ~2.0 V, 140% of VILIM). Leading-edge blanking tLEB ~345 ns."+ },+ {+ "number": "4",+ "name": "GND",+ "type": "power_in",+ "description": "Controller ground reference. Return for VCC supply current and reference for all pin voltages. Non-connection is detected via CS-pin ESD diode monitoring (200 µs fault window)."+ },+ {+ "number": "5",+ "name": "DRV",+ "type": "output",+ "description": "Gate driver output to the external power MOSFET. Clamped to VDRV(high) ~12 V (10-14 V) when VCC is high, otherwise follows VCC. Drive capability ~500 mA sink / 300 mA source; RSNK ~13 Ω, RSRC ~30 Ω; tr ~30 ns / tf ~20 ns (CDRV=470 pF)."+ },+ {+ "number": "6",+ "name": "VCC",+ "type": "power_in",+ "description": "Controller supply pin, fed from an external auxiliary winding once running. Startup VCC(on) ~18 V, UVLO VCC(off) ~10.2 V, VCC(OVP) ~26.5 V, absolute max 30 V. Operating current: ~1.35 mA disabled, ~3.0-3.5 mA switching at 65 kHz."+ },+ {+ "number": "7",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect; pin removed for high-voltage creepage between the HV pin (pin 8) and the low-voltage pins. Package is a SOIC-7 (SOIC-8 body with pin 7 omitted)."+ },+ {+ "number": "8",+ "name": "HV",+ "type": "input",+ "description": "High-voltage sensing / startup pin. Connects after the diode bridge (up to 700 V absolute max) to provide the internal high-voltage startup current source (IHV(start1) ~300 µA, IHV(start2) ~5.1 mA) and to sense the rectified line for PFC shaping, brown-out (~108 V on / ~98 V off), and line OVP (~469 V trip, ~443 V reset)."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction",+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "cad_basis": {+ "from": [+ "README CAD section (factory cad_wording)",+ ".kicad_mod model path agrees"+ ],+ "missing": []+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "distributor_links": {+ "lcsc": "C904364",+ "digikey": "488-NCL30488A2DR2GTR-ND",+ "mouser": "863-NCL30488A2DR2G"+ },+ "distributor_check": {+ "checked_at": "2026-10-05T19:11:12Z",+ "source": "Component Ocean /api/assign-pns + lcsc_map",+ "digikey": {+ "pn": "488-NCL30488A2DR2GTR-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "863-NCL30488A2DR2G",+ "status": "found"+ }+ },+ "models_3d": [+ {+ "file": "ncl30488a2dr2g.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 5.4,+ 4.9,+ 1.1+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "4c9435ffd3683a4ae45655e397c25900eda4f6782a526780f4f7b7b99a32dca7",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "ncl30488a2dr2g-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 5.4,+ 4.9,+ 1.1+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "96845d2c8b92ab87d43093e024eacf8eeb6c15ee0f79002ceeac2ae775e091de",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public"+}
page.json+7−7@@ -1,6 +1,6 @@ { "slug": "ncl30488a2dr2g",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "onsemi LED Drivers, SOIC-7. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [@@ -25,11 +25,10 @@ "docs/ncl30488a2dr2g-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html",- "ncl30488a2dr2g-etched.step"+ "ncl30488a2dr2g-etched.step",+ "ncl30488a2dr2g-etched.glb" ],- "visibility": {- "public": true- },+ "visibility": "public", "author": { "name": "Ray" },@@ -170,5 +169,6 @@ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ]- }-}+ },+ "org": "adom"+}