main
Ray Publish 0.1.0 09e875a
{
  "slug": "ncl30186bdr2g",
  "version": "0.1.0",
  "type": "component",
  "description": "onsemi LED Drivers, SOP-10. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "led drivers",
    "ncl30186bdr2g",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ncl30186bdr2g.kicad_sym",
    "ncl30186bdr2g.kicad_mod",
    "ncl30186bdr2g.glb",
    "ncl30186bdr2g.step",
    "ncl30186bdr2g.lbr",
    "docs/hero.png",
    "docs/ncl30186bdr2g-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ncl30186bdr2g-hero.glb",
    "ncl30186bdr2g-hero.overlay.json",
    "ncl30186bdr2g-etched.glb"
  ],
  "component": {
    "mpn": "NCL30186BDR2G",
    "manufacturer": "onsemi",
    "package": "SOP-10",
    "pin_count": 10,
    "category": "LED Drivers",
    "subcategory": "LED Drivers",
    "datasheet": "https://www.onsemi.com/pdf/datasheet/ncl30186b-d.pdf",
    "parts": {
      "symbol": "ncl30186bdr2g.kicad_sym",
      "footprint": "ncl30186bdr2g.kicad_mod",
      "model_3d": "ncl30186bdr2g-hero.glb",
      "model_3d_plain": "ncl30186bdr2g-etched.glb",
      "model_3d_step": "ncl30186bdr2g-etched.step",
      "model_3d_step_plain": "ncl30186bdr2g.step",
      "lbr": "ncl30186bdr2g.lbr"
    },
    "distributor_links": {
      "lcsc": "C464034",
      "digikey": "NCL30186BDR2GOSTR-ND",
      "mouser": "863-NCL30186BDR2G"
    },
    "distributor_check": {
      "checked_at": "2026-10-28T16:23:42Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "NCL30186BDR2GOSTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "863-NCL30186BDR2G",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "DIM",
        "type": "input",
        "description": "Used for analog or PWM dimming control; an analog signal varied between VDIM0 and VDIM100 or a PWM signal adjusts the LED current."
      },
      {
        "number": "2",
        "name": "ZCD",
        "type": "input",
        "description": "Connected to the auxiliary winding, this pin detects the core reset event."
      },
      {
        "number": "3",
        "name": "VS",
        "type": "power_in",
        "description": "Monitors the input voltage rail for power factor correction, valley lockout and brownout detection, with brownout declared if VS stays below VBO(off) of 0.9 V typical for more than the 25 ms blanking time."
      },
      {
        "number": "4",
        "name": "COMP",
        "type": "passive",
        "description": "Receives a filtering capacitor for power factor correction, with typical values ranging from 1 to 4.7 µF."
      },
      {
        "number": "5",
        "name": "SD",
        "type": "input",
        "description": "An NTC connected here programs the thermal current foldback threshold and slope, and a Zener diode can pull it up for adjustable OVP while stopping the controller."
      },
      {
        "number": "6",
        "name": "CS",
        "type": "input",
        "description": "Monitors the primary peak current; the controller stops operating if the measured CS impedance at start-up does not exceed 120 Ω typically."
      },
      {
        "number": "7",
        "name": "GND",
        "type": "power_in",
        "description": "Controller ground pin."
      },
      {
        "number": "8",
        "name": "DRV",
        "type": "output",
        "description": "Driver output to an external MOSFET."
      },
      {
        "number": "9",
        "name": "VCC",
        "type": "power_in",
        "description": "Positive supply of the IC; the circuit starts when VCC exceeds 18 V and turns off below 8.8 V (typical), with an operating range of 9.4 V up to 26 V after start-up."
      },
      {
        "number": "10",
        "name": "NC",
        "type": "unconnected",
        "description": "Not connected."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 8,
        "cost_usd": 0.0137,
        "at": "2026-10-28T16:23:15"
      },
      "datasheet": {
        "url": "https://www.onsemi.com/pdf/datasheet/ncl30186b-d.pdf",
        "pages": 29,
        "sha256": "f2992f1a48dda216",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 10,
        "described": 10,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ncl30186bdr2g.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.06,
          4.9,
          1.75
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "8148a4f0e4f460aca43c518b8a15d9989c5d13ae4148196ef126a87279ef11bd",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ncl30186bdr2g-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.06,
          4.9,
          1.75
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "497e66fd55a7378e647810a13914607b38dc3d1978099750bd888d5ee23052bb",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}