NCL2801CDBDR2G

{
  "schema_version": 1,
  "type": "component",
  "slug": "ncl2801cdbdr2g",
  "title": "NCL2801CDBDR2G",
  "brief": "onsemi LED Drivers, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "led drivers",
    "ncl2801cdbdr2g",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "NCL2801CDBDR2G",
    "manufacturer": "onsemi",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "LED Drivers",
    "subcategory": "LED Drivers",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588913372624117760",
    "parts": {
      "symbol": "ncl2801cdbdr2g.kicad_sym",
      "footprint": "ncl2801cdbdr2g.kicad_mod",
      "model_3d": "ncl2801cdbdr2g-hero.glb",
      "model_3d_plain": "ncl2801cdbdr2g-etched.glb",
      "model_3d_step": "ncl2801cdbdr2g-etched.step",
      "model_3d_step_plain": "ncl2801cdbdr2g.step",
      "lbr": "ncl2801cdbdr2g.lbr"
    },
    "distributor_links": {
      "lcsc": "C603420",
      "digikey": "NCL2801CDBDR2GOSTR-ND",
      "mouser": "863-NCL2801CDBDR2G"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T02:45:48Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "NCL2801CDBDR2GOSTR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "863-NCL2801CDBDR2G",
        "status": "found",
        "lifecycle": "Not Recommended for New Designs"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "FB",
        "type": "input",
        "description": "Receives a portion of the PFC output voltage for regulation, DRE (below 95.5% of the desired output level), soft/fast OVP and UVP (UVP threshold VUVPH 450 mV typ); a 250-nA sink current disables the part if the pin is left open."
      },
      {
        "number": "2",
        "name": "VCTRL",
        "type": "output",
        "description": "Error amplifier output where the external compensation network sets loop bandwidth below about 20 Hz; it is internally pulled down when the circuit is off for soft-start and must not be controlled or pulled down externally."
      },
      {
        "number": "3",
        "name": "MULT",
        "type": "input",
        "description": "Multiplier input receiving a scaled-down rectified mains voltage from a resistor divider between Vin and GND; the controller is disabled if the pin is left open or exceeds Vmult_max (3.2 V typ)."
      },
      {
        "number": "4",
        "name": "CS",
        "type": "input",
        "description": "Senses the MOSFET current to end the on-time at the control value or the maximum current limit, and before startup senses the RCS resistance to GND to set the CrM-to-DCM VCTRL threshold."
      },
      {
        "number": "5",
        "name": "ZCD",
        "type": "input",
        "description": "Uses the auxiliary winding voltage to detect the inductor current zero crossing, clamped at VCC plus a diode drop (max rating -0.3 V to VCC+0.3 V)."
      },
      {
        "number": "6",
        "name": "GND",
        "type": "power_in",
        "description": "Connect this pin to the PFC stage ground."
      },
      {
        "number": "7",
        "name": "DRV",
        "type": "output",
        "description": "Totem-pole gate drive with -0.5 A/+0.8 A capability to drive high gate charge power MOSFETs."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Positive supply of the IC; for the C/D versions it starts at 12.5 V and turns off below 10.0 V (typ), operating range up to 27 V maximum."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin numbers are inferred from the scrambled text of the SO-8 pin-connection diagram on page 1, which; The provided excerpt (6 of 28 pages) has no pin-function table. Descriptions are built only from fea; VCTRL (pin 7) has no function or limits in the provided text. Its type is a best guess and needs con"
        ],
        "pages_sent": 6,
        "cost_usd": 0.2121,
        "at": "2026-10-18T02:43:33"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588913372624117760",
        "pages": 28,
        "sha256": "4746bd846f36d1af",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ncl2801cdbdr2g.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ncl2801cdbdr2g-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "a7d8c20626ca6f453f1cb3c397b33a8a01a2ba87a8568ff0afcb0e6d4b9719b5",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "onsemi",
      "Package": "SOIC-8",
      "Category": "LED Drivers",
      "Pins": "8"
    },
    "characteristics": {
      "version": 1,
      "source": "datasheet",
      "datasheet_sha256": "4746bd846f36d1af30cea534a6d793d2e873f2a378724dd47fe03e33775410b8",
      "rows": [
        {
          "name": "Start-Up Threshold, VCC increasing ([C] & [D] Versions)",
          "symbol": "VCC,on",
          "kind": "electrical",
          "unit": "V",
          "min": 11.6,
          "typ": 12.5,
          "max": 13.4,
          "conditions": "VCC increasing; [C] & [D] Versions",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Minimum Operating Voltage, VCC falling ([C] & [D] Versions)",
          "symbol": "VCC,off",
          "kind": "electrical",
          "unit": "V",
          "min": 9.3,
          "typ": 10,
          "max": 10.7,
          "conditions": "VCC falling; [C] & [D] Versions",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Voltage at which IC completely restarts",
          "symbol": "VCC,rst",
          "kind": "electrical",
          "unit": "V",
          "min": 6.5,
          "typ": 7.2,
          "max": 7.8,
          "conditions": "ICC drops to ~ICC,start",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Hysteresis (VCC,on − VCC,off) ([C] & [D] Versions)",
          "symbol": "VCC,hyst",
          "kind": "electrical",
          "unit": "V",
          "min": 1.25,
          "typ": 2.5,
          "max": 3.75,
          "conditions": "[C] & [D] Versions",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Start-Up Current",
          "symbol": "ICC,start",
          "kind": "electrical",
          "unit": "A",
          "min": 0,
          "typ": 10,
          "max": 60,
          "conditions": "VCC = 9.4 V, below startup voltage",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Operating Consumption, no switching",
          "symbol": "ICC,op1",
          "kind": "electrical",
          "unit": "mA",
          "min": 0,
          "typ": 0.4,
          "max": 1,
          "conditions": "no switching",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Operating Consumption, 50-kHz switching",
          "symbol": "ICC,op2",
          "kind": "electrical",
          "unit": "mA",
          "min": 1,
          "typ": 2,
          "max": 3,
          "conditions": "50-kHz switching, no load on DRV pin",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Output voltage rise-time",
          "symbol": "tR",
          "kind": "timing",
          "unit": "ns",
          "min": 15,
          "typ": 30,
          "max": 90,
          "conditions": "CL = 1 nF, 10-90% of output signal",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Output voltage fall-time",
          "symbol": "tF",
          "kind": "timing",
          "unit": "ns",
          "min": 10,
          "typ": 20,
          "max": 50,
          "conditions": "CL = 1 nF, 10-90% of output signal",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Source resistance",
          "symbol": "ROH",
          "kind": "electrical",
          "unit": "",
          "min": 4,
          "typ": 10,
          "max": 20,
          "conditions": "@ 200 mV under High VCC",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Sink resistance",
          "symbol": "ROL",
          "kind": "electrical",
          "unit": "",
          "min": 2,
          "typ": 7,
          "max": 15,
          "conditions": "@ 200 mV above Low VCC",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "DRV pin level for VCC = VCC,off + 200 mV ([C] & [D] Versions)",
          "symbol": "VDRV,low",
          "kind": "electrical",
          "unit": "V",
          "min": 9.6,
          "typ": 10,
          "max": 11,
          "conditions": "10-k resistor between DRV and GND; [C] & [D] Versions",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "DRV pin level at VCC = 27 V",
          "symbol": "VDRV,high",
          "kind": "electrical",
          "unit": "V",
          "min": 10,
          "typ": 12,
          "max": 14,
          "conditions": "RL = 33 k & CL = 1 nF",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Feedback Voltage Reference",
          "symbol": "VREF",
          "kind": "electrical",
          "unit": "V",
          "min": 2.45,
          "typ": 2.5,
          "max": 2.55,
          "conditions": "",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Error Amplifier Current Capability (source and sink)",
          "symbol": "IEA",
          "kind": "electrical",
          "unit": "A",
          "min": 15,
          "typ": 20,
          "max": 25,
          "conditions": "source and sink",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Error Amplifier Gain",
          "symbol": "GEA",
          "kind": "electrical",
          "unit": "S",
          "min": 110,
          "typ": 200,
          "max": 290,
          "conditions": "",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "VCTRL pin Voltage (upper, Vctrl,max)",
          "symbol": "Vctrl,max",
          "kind": "electrical",
          "unit": "V",
          "min": 4.4,
          "typ": 4.5,
          "max": 4.6,
          "conditions": "@ VFB = 2 V (OTA is sourcing 20 A)",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "VCTRL pin Voltage (lower, Vctrl,min)",
          "symbol": "Vctrl,min",
          "kind": "electrical",
          "unit": "V",
          "min": 0.4,
          "typ": 0.5,
          "max": 0.6,
          "conditions": "@ VFB = 3 V (OTA is sinking 20 A)",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Current Sense Voltage Reference (OCP), no line level detection",
          "symbol": "VCS_OCP(th)",
          "kind": "electrical",
          "unit": "V",
          "min": 0.97,
          "typ": 1.07,
          "max": 1.19,
          "conditions": "[B]&[D] Options; at tLEB,OCP",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Current Sense Overstress Voltage Reference, no line level detection",
          "symbol": "VCS_OVS(th)",
          "kind": "electrical",
          "unit": "V",
          "min": 1.45,
          "typ": 1.6,
          "max": 1.78,
          "conditions": "[B]&[D] Options; at tLEB,OVS",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Leading edge Blanking Time for current control",
          "symbol": "tLEB,OCP",
          "kind": "timing",
          "unit": "ns",
          "min": 125,
          "typ": 200,
          "max": 275,
          "conditions": "",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Leading edge Blanking Time for Overstress",
          "symbol": "tLEB,OVS",
          "kind": "timing",
          "unit": "ns",
          "min": 50,
          "typ": 100,
          "max": 150,
          "conditions": "",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Over-Current Protection Delay from VCS>VCS(th) to DRV low",
          "symbol": "tOCP",
          "kind": "timing",
          "unit": "ns",
          "min": 10,
          "typ": 40,
          "max": 200,
          "conditions": "VCS > VCS(th) + 100 mV",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Watch Dog Timer in OverStress situation",
          "symbol": "tWDG(OS)",
          "kind": "timing",
          "unit": "s",
          "min": 400,
          "typ": 800,
          "max": 1200,
          "conditions": "",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "ZCD positive clamp",
          "symbol": "VCL(pos)",
          "kind": "electrical",
          "unit": "V",
          "min": 12.6,
          "typ": 12.9,
          "max": 13.2,
          "conditions": "VCC = 12 V, IZCD = 5 mA",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Zero Current Detection, VZCD rising",
          "symbol": "VZCD(th)H",
          "kind": "electrical",
          "unit": "mV",
          "min": 675,
          "typ": 750,
          "max": 825,
          "conditions": "VZCD rising",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Zero Current Detection, VZCD falling",
          "symbol": "VZCD(th)L",
          "kind": "electrical",
          "unit": "mV",
          "min": 200,
          "typ": 250,
          "max": 300,
          "conditions": "VZCD falling",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Hysteresis of the Zero Current Detection Comparator",
          "symbol": "VZCD(hyst)",
          "kind": "electrical",
          "unit": "mV",
          "min": 375,
          "typ": 500,
          "max": 625,
          "conditions": "",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "ZCD pin input leakage current",
          "symbol": "IZCD,bias",
          "kind": "electrical",
          "unit": "nA",
          "min": 0,
          "typ": 250,
          "max": 500,
          "conditions": "",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Zero current detection to DRV high delay",
          "symbol": "tZCD",
          "kind": "timing",
          "unit": "ns",
          "min": 20,
          "typ": 80,
          "max": 200,
          "conditions": "(VZCD < VZCD(th)L) to (DRV high)",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Multiplier Gain, no line level detection",
          "symbol": "Kmult",
          "kind": "electrical",
          "unit": "1/V",
          "min": 0.34,
          "typ": 0.38,
          "max": 0.42,
          "conditions": "[B]&[D] Options (w/o line level detection)",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Koffset.Vton voltage added at the multiplier output, no line detection",
          "symbol": "Koffset_nld",
          "kind": "electrical",
          "unit": "",
          "min": 0.04,
          "typ": 0.075,
          "max": 0.12,
          "conditions": "[B]&[D] Options (w/o line detection)",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Maximum MULT pin voltage",
          "symbol": "Vmult_max",
          "kind": "electrical",
          "unit": "V",
          "min": 2.88,
          "typ": 3.2,
          "max": 3.52,
          "conditions": "Controller disabled if MULT pin voltage goes above this threshold",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Maximum on-time (high VCTRL)",
          "symbol": "tON,max,A,2",
          "kind": "timing",
          "unit": "s",
          "min": 26,
          "typ": 30,
          "max": 36,
          "conditions": "@ VCTRL = 4.50 V",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Maximum on-time (low VCTRL)",
          "symbol": "tON,max,A,1",
          "kind": "timing",
          "unit": "s",
          "min": 3.6,
          "typ": 5,
          "max": 6.9,
          "conditions": "@ VCTRL = 0.55 V",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Dead time added after 6th valley",
          "symbol": "tADT",
          "kind": "timing",
          "unit": "s",
          "min": 14,
          "typ": 20,
          "max": null,
          "conditions": "Vctrl = 0.50 V",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Dead time added after 6th valley",
          "symbol": "tADT",
          "kind": "timing",
          "unit": "s",
          "min": 0,
          "typ": 0.1,
          "max": 0.4,
          "conditions": "Vctrl = 0.77 V",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Ratio (Soft OVP Threshold, VFB rising) over VREF ([C**] Options)",
          "symbol": "RsoftOVP,C",
          "kind": "electrical",
          "unit": "%",
          "min": 103.5,
          "typ": 105,
          "max": 106.5,
          "conditions": "Options [C**]",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Ratio (Fast OVP Threshold, VFB rising) over VREF ([C**] Option)",
          "symbol": "RfastOVP,C",
          "kind": "electrical",
          "unit": "%",
          "min": 103.2,
          "typ": 107,
          "max": 110.8,
          "conditions": "Option [C**]",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Ratio (Fast OVP Hysteresis) over VREF",
          "symbol": "RfastOVP(HYST)",
          "kind": "electrical",
          "unit": "%",
          "min": 3,
          "typ": 4,
          "max": 5.7,
          "conditions": "",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "FB pin pull-down Current",
          "symbol": "IB,FB",
          "kind": "electrical",
          "unit": "nA",
          "min": 50,
          "typ": 200,
          "max": 450,
          "conditions": "VFB = VOVP and VFB = VUVP",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Ratio (DRE Threshold, VFB falling) over VREF",
          "symbol": "RDRE",
          "kind": "electrical",
          "unit": "%",
          "min": 94,
          "typ": 95.7,
          "max": 97.5,
          "conditions": "",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Current measured out of VCTRL pin at startup (DRE)",
          "symbol": "IVCTRL,Startup",
          "kind": "electrical",
          "unit": "A",
          "min": 80,
          "typ": 100,
          "max": 120,
          "conditions": "@ VFB=1V (PFCOK=0 ⇔ Startup)",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Current measured out of VCTRL pin, steady state (DRE)",
          "symbol": "IVCTRL,1,Steady",
          "kind": "electrical",
          "unit": "A",
          "min": 160,
          "typ": 200,
          "max": 240,
          "conditions": "@ VFB=1V (PFCOK=1 ⇔ Steady State); [B], [D], [F] Product Options",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "UVP Threshold, VFB increasing",
          "symbol": "VUVPH",
          "kind": "electrical",
          "unit": "mV",
          "min": 380,
          "typ": 450,
          "max": 520,
          "conditions": "VFB increasing",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "UVP Threshold, VFB decreasing",
          "symbol": "VUVPL",
          "kind": "electrical",
          "unit": "mV",
          "min": 150,
          "typ": 200,
          "max": 250,
          "conditions": "VFB decreasing",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Thermal Shutdown Threshold",
          "symbol": "TLIMIT",
          "kind": "thermal",
          "unit": "°C",
          "min": 150,
          "typ": null,
          "max": null,
          "conditions": "",
          "source_page": 9,
          "source": "datasheet"
        },
        {
          "name": "Operating supply range after start-up",
          "symbol": "VCC",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 10,
          "typ": null,
          "max": 27,
          "conditions": "After start-up; 9 V minimum for [A], [B], [E], [F] options",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Supply voltage input (absolute maximum)",
          "symbol": "VCC",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 27,
          "conditions": "",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "FB pin rating",
          "symbol": "FB",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 9,
          "conditions": "",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "VCTRL pin rating",
          "symbol": "VCTRL",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": null,
          "conditions": "Max is Vctrl,max, the VCTRL clamp voltage (Note 3)",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "MULT pin rating",
          "symbol": "MULT",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 9,
          "conditions": "",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "CS pin rating",
          "symbol": "CS",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 9,
          "conditions": "",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "ZCD pin rating",
          "symbol": "ZCD",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": null,
          "conditions": "Max is VCC+0.3 V",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Driver voltage",
          "symbol": "VDRV",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": null,
          "conditions": "Max is VDRV (Note 3)",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Driver current",
          "symbol": "IDRV",
          "kind": "absolute_maximum",
          "unit": "mA",
          "min": -500,
          "typ": null,
          "max": 800,
          "conditions": "",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Maximum Power Dissipation",
          "symbol": "PD",
          "kind": "absolute_maximum",
          "unit": "mW",
          "min": null,
          "typ": null,
          "max": 300,
          "conditions": "@ TA = 70°C",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Operating Junction Temperature Range",
          "symbol": "TJ",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": -40,
          "typ": null,
          "max": 125,
          "conditions": "",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Storage Temperature Range",
          "symbol": "TS,max",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": -65,
          "typ": null,
          "max": 150,
          "conditions": "",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Thermal Resistance Junction to Air",
          "symbol": "Rja",
          "kind": "thermal",
          "unit": "°C/W",
          "min": null,
          "typ": 180,
          "max": null,
          "conditions": "",
          "source_page": 4,
          "source": "datasheet"
        }
      ]
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "ncl2801cdbdr2g"
  ],
  "discovery_pitch": "NCL2801CDBDR2G (onsemi) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ncl2801cdbdr2g.kicad_sym",
    "ncl2801cdbdr2g.kicad_mod",
    "ncl2801cdbdr2g.glb",
    "ncl2801cdbdr2g.step",
    "ncl2801cdbdr2g.lbr",
    "docs/hero.png",
    "docs/ncl2801cdbdr2g-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ncl2801cdbdr2g-hero.glb",
    "ncl2801cdbdr2g-hero.overlay.json",
    "ncl2801cdbdr2g-etched.glb"
  ],
  "visibility": {
    "public": true
  }
}