main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ncd57252dwr2g: viewers · Ray
ncd57252dwr2g-etched.glb Publish 0.1.0 · Ray
ncd57252dwr2g-etched.step ncd57252dwr2g: factory component page (tier=mfr) · Ray
ncd57252dwr2g-hero.glb ncd57252dwr2g: hero GLB from the etched model (keeps the MPN mark) · Ray
ncd57252dwr2g-hero.overlay.json Publish 0.1.0 · Ray
ncd57252dwr2g.glb Publish 0.1.0 · Ray
ncd57252dwr2g.kicad_mod Publish 0.1.0 · Ray
ncd57252dwr2g.kicad_sym Publish 0.1.0 · Ray
ncd57252dwr2g.lbr Publish 0.1.0 · Ray
ncd57252dwr2g.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 16 pins · Ray

NCD57252DWR2G

onsemi · Gate Drive ICs · SOIC-16

NCD57252DWR2G from onsemi, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 INA input Non-inverting gate driver input defining OUTA, with an internal 125 kΩ pull-down, requiring an input pulse longer than the maximum tMIN2 before OUTA reacts, and logic levels scaling with VDDI up to 5 V.
2 INB input Non-inverting gate driver input defining OUTB, with an internal 125 kΩ pull-down, requiring an input pulse longer than the maximum tMIN2 before OUTB reacts, and logic levels scaling with VDDI up to 5 V.
3 VDDI power_in Low voltage side power supply that requires a good quality bypass capacitor to GNDI and enables operation when the supply exceeds the typical UVLOI turn-on voltage.
4 GNDI power_in Low voltage side ground reference for the input-side supply and logic.
5 DIS input A high level turns both OUTA and OUTB low simultaneously regardless of INA, INB, DT and ANB, with an internal 125 kΩ pull-down and a maximum voltage of VDDI.
6 DT input Deadtime pin where an external resistor from DT to GNDI sets the deadtime (approximately 10 ns per kΩ), with allowed resistance from 5 kΩ to 500 kΩ and a maximum voltage of VDDI.
7 ANB input A-and-B enable pin that, when high, makes OUTA and OUTB complementary outputs driven from one PWM signal on INA with INB tied to INA, with an internal 100 kΩ pull-down and a maximum voltage of VDDI.
8 VDDI power_in Low voltage side power supply that requires a good quality bypass capacitor to GNDI and enables operation when the supply exceeds the typical UVLOI turn-on voltage.
9 GNDB power_in Power ground for the channel B high voltage side.
10 OUTB output Channel B gate driver output on the high voltage side, galvanically isolated from the low voltage side and channel A, actively pulled low during startup, DIS high, or UVLOB/UVLOI conditions.
11 VDDB power_in High voltage side power supply for channel B that requires a good quality bypass capacitor to GNDB and enables operation when the supply exceeds the typical UVLOB turn-on voltage.
12 NC unconnected Not connected internally.
13 NC unconnected Not connected internally.
14 GNDA power_in Power ground for the channel A high voltage side.
15 OUTA output Channel A gate driver output on the high voltage side, galvanically isolated from the low voltage side and channel B, actively pulled low during startup, DIS high, or UVLOA/UVLOI conditions.
16 VDDA power_in High voltage side power supply for channel A that requires a good quality bypass capacitor to GNDA and enables operation when the supply exceeds the typical UVLOA turn-on voltage.

Key specifications

Parameter Value
Manufacturer onsemi
Package SOIC-16
Category Power Supply Chip
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage, low voltage side VDDI-GNDI -0.3 22 V 7
Supply voltage, high voltage side, channel A VDDA-GNDA -0.3 36 V 7
Supply voltage, high voltage side, channel B VDDB-GNDB -0.3 36 V 7
Voltage at INA, INB, DIS, DT, ANB VLIM-GNDI -0.3 V 7
Gate-driver output sourcing current (NCx57252/57253) IPK-SRC 6.5 A maximum pulse width = 10 s, minimum period = 5 ms, VDDA, GNDA = VDDB, GNDB = 15 V 7
Gate-driver output sinking current (NCx57252/57253) IPK-SNK 6.5 A maximum pulse width = 10 s, minimum period = 5 ms, VDDA, GNDA = VDDB, GNDB = 15 V 7
Maximum Short Circuit Clamping Time tCLP 10 s IOUTA_CLAMP = IOUTB_CLAMP = 500 mA 7
Power Dissipation (SOIC-16WB) PD 1060 mW Note 3 7
Input to Output Isolation Voltage (SOIC-16WB) VIOWM -5000 5000 V 7
Maximum Junction Temperature TJ(max) -40 150 °C 7
Storage Temperature Range TSTG -65 150 °C 7
ESD Capability, Human Body Model ESDHBM -4 4 kV 7
ESD Capability, Charged Device Model ESDCDM -2 2 kV 7
Lead Temperature Soldering Reflow, Pb-Free Versions TSLD 260 °C Note 5 7
Supply voltage, low voltage side (recommended) VDDI-GNDI 20 V 7
Supply voltage, high voltage side, channel A (recommended) VDDA-GNDA 32 V 7
Supply voltage, high voltage side, channel B (recommended) VDDB-GNDB 32 V 7
Common Mode Transient Immunity (CMTI) dVISO/dt 100 kV/s 7
Ambient Temperature TA -40 125 °C 7
VDDA/VDDB Supply Under Voltage Output Enabled (NCx57252) VUVLOA-OUT-ON 12.4 12.9 13.4 V VDDA/VDDB Supply Under Voltage Output Enabled 8
VDDA/VDDB Supply Under Voltage Output Disabled (NCx57252) VUVLOA-OUT-OFF 11.5 12 12.5 V VDDA/VDDB Supply Under Voltage Output Disabled 8
VDDA/VDDB Supply Voltage Output Enabled/Disabled Hysteresis VUVLOA/B-HYST 0.8 1 V 8
Output Low State (TA = -40°C to 125°C, ISINK = 200 mA) VOUTAL2, VOUTBL2 0.5 V ISINK = 200 mA, TA = −40°C to 125°C 8
Output High State (TA = -40°C to 125°C, ISRC = 200 mA) VOUTAH2, VOUTBH2 14.2 V ISRC = 200 mA, TA = −40°C to 125°C 8
Output High State (TA = 25°C, ISRC = 200 mA) VOUTAH1, VOUTBH1 14.7 14.8 V ISRC = 200 mA, TA = 25°C 8
Output Low State (TA = 25°C, ISINK = 200 mA) VOUTAL1, VOUTBL1 0.1 0.22 V ISINK = 200 mA, TA = 25°C 8
Clamping Voltage (VCLAMP-OUTA - VDDA), (VCLAMP-OUTB - VDDB) VCLAMP-OUTA, VCLAMP-OUTB 0.4 0.6 V IOUTA = IOUTB = 500 mA (pulse test, tCLPmax = 10 s) 8
OUTA High Propagation Delay tPD-ON-A 40 60 80 ns CLOAD = 10 nF, VINAH to 10% of Output Change for PW > 150 ns 9
OUTA Low Propagation Delay tPD-OFF-A 40 60 80 ns CLOAD = 10 nF, VINAL to 90% of Output Change for PW > 150 ns 9
OUTB High Propagation Delay tPD-ON-B 40 60 80 ns CLOAD = 10 nF, VINBH to 10% of Output Change for PW > 150 ns 9
OUTB Low Propagation Delay tPD-OFF-B 40 60 80 ns CLOAD = 10 nF, VINBL to 90% of Output Change for PW > 150 ns 9
Propagation Delay Distortion (Channel A) tDISTORT-A -20 0 20 ns PW >150 ns 9
Propagation Delay Distortion (Channel B) tDISTORT-B -20 0 20 ns PW >150 ns 9
Rising Edge Propagation Delay Distortion tDISTORT-ON -20 0 20 ns PW >150 ns 9
Falling Edge Propagation Delay Distortion tDISTORT-OFF -20 0 20 ns PW >150 ns 9
UVLOI/UVLOA/UVLOB Rise Delay tUVR 10 20 s Note 10 9
Peak Driver Current, Sink (SOIC-16WB) IPK-SNK1 6.5 A Note 10 9
VDDI Supply Under Voltage Output Enabled VUVLOI-OUT-ON 3.1 V 8
VDDI Supply Under Voltage Output Disabled VUVLOI-OUT-OFF 2.4 V 8
VDDI Supply Voltage Output Enabled/Disabled Hysteresis VUVLOI-HYST 0.1 V 8
Low Voltage Side Quiescent Current IQDDI-0 2 mA VINA = VINB = 0 V 8
Low Voltage Side Operating Current at 50% Duty Cycle IQDDI-50 4 mA INA PWM, INB Low (or INA Low, INB PWM), f = 200 kHz 8
Low Voltage Side Operating Current at 100% Duty Cycle IQDDI-100 6 mA INA or INB High 8
High Voltage Side Quiescent Current, per channel IQDDA-0, IQDDB-0 2 mA VINA = VINB = 0 V, Current per Channel 8
High Voltage Side Operating Current at 50% Duty Cycle, per channel IQDDA-50, IQDDB-50 2 mA Current per Channel, f = 200 kHz, CG = 1 nF 8
High Voltage Side Operating Current at 100% Duty Cycle, per channel IQDDA-100, IQDDB-100 2 mA Current per Channel 8
Peak Miller Plateau Current, Sink (SOIC-16WB) IPK-SNK2 6 A VOUTA = VOUTB = 6 V (near IGBT Miller Plateau) 9
Peak Driver Current, Source (SOIC-16WB) IPK-SRC1 6.5 A Note 10 9
Peak Miller Plateau Current, Source (SOIC-16WB) IPK-SRC2 6 A VOUTA = VOUTB = 9 V (near IGBT Miller Plateau) 9
Rise Time for Both Channel A and B tRISE 12 ns CLOAD = 1 nF, 10% to 90% of Output Change 9
Fall Time for Both Channel A and B tFALL 10 ns CLOAD = 1 nF, 90% to 10% of Output Change 9
Disable Delay tDIS 60 ns 9
UVLOI/UVLOA/UVLOB Fall Delay tUVF 1.5 s Note 10 9
Deadtime between channels, DT pin float tDT 20 ns DT pin Float 9
Deadtime between channels, RDT = 20 k tDT 200 ns RDT = 20 k 9
Thermal Resistance, Junction-to-Air, SOIC-16WB, 1 surface layer RJA 81 °C/W 100 mm2, 2 oz Copper, 1 Surface Layer 7
Thermal Resistance, Junction-to-Air, SOIC-16WB, 2 surface layers and 2 internal power planes RJA 57 °C/W 100 mm2, 2 oz Copper, 2 Surface Layers and 2 Internal Power Plane Layers 7

CAD (KiCad official)

  • Symbol: NCD57252DWR2G
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOIC-16 (KiCad packages3D, STEP)
  • 3D model files: ncd57252dwr2g-etched.step / ncd57252dwr2g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ncd57252dwr2g.step / ncd57252dwr2g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (24 pp, sha256 2f43e7a884573d90, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF