3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownNCD57252DWR2G
onsemi · Gate Drive ICs · SOIC-16
NCD57252DWR2G from onsemi, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | INA | input | Non-inverting gate driver input defining OUTA, with an internal 125 kΩ pull-down, requiring an input pulse longer than the maximum tMIN2 before OUTA reacts, and logic levels scaling with VDDI up to 5 V. |
| 2 | INB | input | Non-inverting gate driver input defining OUTB, with an internal 125 kΩ pull-down, requiring an input pulse longer than the maximum tMIN2 before OUTB reacts, and logic levels scaling with VDDI up to 5 V. |
| 3 | VDDI | power_in | Low voltage side power supply that requires a good quality bypass capacitor to GNDI and enables operation when the supply exceeds the typical UVLOI turn-on voltage. |
| 4 | GNDI | power_in | Low voltage side ground reference for the input-side supply and logic. |
| 5 | DIS | input | A high level turns both OUTA and OUTB low simultaneously regardless of INA, INB, DT and ANB, with an internal 125 kΩ pull-down and a maximum voltage of VDDI. |
| 6 | DT | input | Deadtime pin where an external resistor from DT to GNDI sets the deadtime (approximately 10 ns per kΩ), with allowed resistance from 5 kΩ to 500 kΩ and a maximum voltage of VDDI. |
| 7 | ANB | input | A-and-B enable pin that, when high, makes OUTA and OUTB complementary outputs driven from one PWM signal on INA with INB tied to INA, with an internal 100 kΩ pull-down and a maximum voltage of VDDI. |
| 8 | VDDI | power_in | Low voltage side power supply that requires a good quality bypass capacitor to GNDI and enables operation when the supply exceeds the typical UVLOI turn-on voltage. |
| 9 | GNDB | power_in | Power ground for the channel B high voltage side. |
| 10 | OUTB | output | Channel B gate driver output on the high voltage side, galvanically isolated from the low voltage side and channel A, actively pulled low during startup, DIS high, or UVLOB/UVLOI conditions. |
| 11 | VDDB | power_in | High voltage side power supply for channel B that requires a good quality bypass capacitor to GNDB and enables operation when the supply exceeds the typical UVLOB turn-on voltage. |
| 12 | NC | unconnected | Not connected internally. |
| 13 | NC | unconnected | Not connected internally. |
| 14 | GNDA | power_in | Power ground for the channel A high voltage side. |
| 15 | OUTA | output | Channel A gate driver output on the high voltage side, galvanically isolated from the low voltage side and channel B, actively pulled low during startup, DIS high, or UVLOA/UVLOI conditions. |
| 16 | VDDA | power_in | High voltage side power supply for channel A that requires a good quality bypass capacitor to GNDA and enables operation when the supply exceeds the typical UVLOA turn-on voltage. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOIC-16 |
| Category | Power Supply Chip |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage, low voltage side | VDDI-GNDI | -0.3 | 22 | V | 7 | ||
| Supply voltage, high voltage side, channel A | VDDA-GNDA | -0.3 | 36 | V | 7 | ||
| Supply voltage, high voltage side, channel B | VDDB-GNDB | -0.3 | 36 | V | 7 | ||
| Voltage at INA, INB, DIS, DT, ANB | VLIM-GNDI | -0.3 | V | 7 | |||
| Gate-driver output sourcing current (NCx57252/57253) | IPK-SRC | 6.5 | A | maximum pulse width = 10 s, minimum period = 5 ms, VDDA, GNDA = VDDB, GNDB = 15 V | 7 | ||
| Gate-driver output sinking current (NCx57252/57253) | IPK-SNK | 6.5 | A | maximum pulse width = 10 s, minimum period = 5 ms, VDDA, GNDA = VDDB, GNDB = 15 V | 7 | ||
| Maximum Short Circuit Clamping Time | tCLP | 10 | s | IOUTA_CLAMP = IOUTB_CLAMP = 500 mA | 7 | ||
| Power Dissipation (SOIC-16WB) | PD | 1060 | mW | Note 3 | 7 | ||
| Input to Output Isolation Voltage (SOIC-16WB) | VIOWM | -5000 | 5000 | V | 7 | ||
| Maximum Junction Temperature | TJ(max) | -40 | 150 | °C | 7 | ||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 7 | ||
| ESD Capability, Human Body Model | ESDHBM | -4 | 4 | kV | 7 | ||
| ESD Capability, Charged Device Model | ESDCDM | -2 | 2 | kV | 7 | ||
| Lead Temperature Soldering Reflow, Pb-Free Versions | TSLD | 260 | °C | Note 5 | 7 | ||
| Supply voltage, low voltage side (recommended) | VDDI-GNDI | 20 | V | 7 | |||
| Supply voltage, high voltage side, channel A (recommended) | VDDA-GNDA | 32 | V | 7 | |||
| Supply voltage, high voltage side, channel B (recommended) | VDDB-GNDB | 32 | V | 7 | |||
| Common Mode Transient Immunity (CMTI) | dVISO/dt | 100 | kV/s | 7 | |||
| Ambient Temperature | TA | -40 | 125 | °C | 7 | ||
| VDDA/VDDB Supply Under Voltage Output Enabled (NCx57252) | VUVLOA-OUT-ON | 12.4 | 12.9 | 13.4 | V | VDDA/VDDB Supply Under Voltage Output Enabled | 8 |
| VDDA/VDDB Supply Under Voltage Output Disabled (NCx57252) | VUVLOA-OUT-OFF | 11.5 | 12 | 12.5 | V | VDDA/VDDB Supply Under Voltage Output Disabled | 8 |
| VDDA/VDDB Supply Voltage Output Enabled/Disabled Hysteresis | VUVLOA/B-HYST | 0.8 | 1 | V | 8 | ||
| Output Low State (TA = -40°C to 125°C, ISINK = 200 mA) | VOUTAL2, VOUTBL2 | 0.5 | V | ISINK = 200 mA, TA = −40°C to 125°C | 8 | ||
| Output High State (TA = -40°C to 125°C, ISRC = 200 mA) | VOUTAH2, VOUTBH2 | 14.2 | V | ISRC = 200 mA, TA = −40°C to 125°C | 8 | ||
| Output High State (TA = 25°C, ISRC = 200 mA) | VOUTAH1, VOUTBH1 | 14.7 | 14.8 | V | ISRC = 200 mA, TA = 25°C | 8 | |
| Output Low State (TA = 25°C, ISINK = 200 mA) | VOUTAL1, VOUTBL1 | 0.1 | 0.22 | V | ISINK = 200 mA, TA = 25°C | 8 | |
| Clamping Voltage (VCLAMP-OUTA - VDDA), (VCLAMP-OUTB - VDDB) | VCLAMP-OUTA, VCLAMP-OUTB | 0.4 | 0.6 | V | IOUTA = IOUTB = 500 mA (pulse test, tCLPmax = 10 s) | 8 | |
| OUTA High Propagation Delay | tPD-ON-A | 40 | 60 | 80 | ns | CLOAD = 10 nF, VINAH to 10% of Output Change for PW > 150 ns | 9 |
| OUTA Low Propagation Delay | tPD-OFF-A | 40 | 60 | 80 | ns | CLOAD = 10 nF, VINAL to 90% of Output Change for PW > 150 ns | 9 |
| OUTB High Propagation Delay | tPD-ON-B | 40 | 60 | 80 | ns | CLOAD = 10 nF, VINBH to 10% of Output Change for PW > 150 ns | 9 |
| OUTB Low Propagation Delay | tPD-OFF-B | 40 | 60 | 80 | ns | CLOAD = 10 nF, VINBL to 90% of Output Change for PW > 150 ns | 9 |
| Propagation Delay Distortion (Channel A) | tDISTORT-A | -20 | 0 | 20 | ns | PW >150 ns | 9 |
| Propagation Delay Distortion (Channel B) | tDISTORT-B | -20 | 0 | 20 | ns | PW >150 ns | 9 |
| Rising Edge Propagation Delay Distortion | tDISTORT-ON | -20 | 0 | 20 | ns | PW >150 ns | 9 |
| Falling Edge Propagation Delay Distortion | tDISTORT-OFF | -20 | 0 | 20 | ns | PW >150 ns | 9 |
| UVLOI/UVLOA/UVLOB Rise Delay | tUVR | 10 | 20 | s | Note 10 | 9 | |
| Peak Driver Current, Sink (SOIC-16WB) | IPK-SNK1 | 6.5 | A | Note 10 | 9 | ||
| VDDI Supply Under Voltage Output Enabled | VUVLOI-OUT-ON | 3.1 | V | 8 | |||
| VDDI Supply Under Voltage Output Disabled | VUVLOI-OUT-OFF | 2.4 | V | 8 | |||
| VDDI Supply Voltage Output Enabled/Disabled Hysteresis | VUVLOI-HYST | 0.1 | V | 8 | |||
| Low Voltage Side Quiescent Current | IQDDI-0 | 2 | mA | VINA = VINB = 0 V | 8 | ||
| Low Voltage Side Operating Current at 50% Duty Cycle | IQDDI-50 | 4 | mA | INA PWM, INB Low (or INA Low, INB PWM), f = 200 kHz | 8 | ||
| Low Voltage Side Operating Current at 100% Duty Cycle | IQDDI-100 | 6 | mA | INA or INB High | 8 | ||
| High Voltage Side Quiescent Current, per channel | IQDDA-0, IQDDB-0 | 2 | mA | VINA = VINB = 0 V, Current per Channel | 8 | ||
| High Voltage Side Operating Current at 50% Duty Cycle, per channel | IQDDA-50, IQDDB-50 | 2 | mA | Current per Channel, f = 200 kHz, CG = 1 nF | 8 | ||
| High Voltage Side Operating Current at 100% Duty Cycle, per channel | IQDDA-100, IQDDB-100 | 2 | mA | Current per Channel | 8 | ||
| Peak Miller Plateau Current, Sink (SOIC-16WB) | IPK-SNK2 | 6 | A | VOUTA = VOUTB = 6 V (near IGBT Miller Plateau) | 9 | ||
| Peak Driver Current, Source (SOIC-16WB) | IPK-SRC1 | 6.5 | A | Note 10 | 9 | ||
| Peak Miller Plateau Current, Source (SOIC-16WB) | IPK-SRC2 | 6 | A | VOUTA = VOUTB = 9 V (near IGBT Miller Plateau) | 9 | ||
| Rise Time for Both Channel A and B | tRISE | 12 | ns | CLOAD = 1 nF, 10% to 90% of Output Change | 9 | ||
| Fall Time for Both Channel A and B | tFALL | 10 | ns | CLOAD = 1 nF, 90% to 10% of Output Change | 9 | ||
| Disable Delay | tDIS | 60 | ns | 9 | |||
| UVLOI/UVLOA/UVLOB Fall Delay | tUVF | 1.5 | s | Note 10 | 9 | ||
| Deadtime between channels, DT pin float | tDT | 20 | ns | DT pin Float | 9 | ||
| Deadtime between channels, RDT = 20 k | tDT | 200 | ns | RDT = 20 k | 9 | ||
| Thermal Resistance, Junction-to-Air, SOIC-16WB, 1 surface layer | RJA | 81 | °C/W | 100 mm2, 2 oz Copper, 1 Surface Layer | 7 | ||
| Thermal Resistance, Junction-to-Air, SOIC-16WB, 2 surface layers and 2 internal power planes | RJA | 57 | °C/W | 100 mm2, 2 oz Copper, 2 Surface Layers and 2 Internal Power Plane Layers | 7 |
CAD (KiCad official)
- Symbol:
NCD57252DWR2G - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOIC-16 (KiCad packages3D, STEP)
- 3D model files:
ncd57252dwr2g-etched.step/ncd57252dwr2g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ncd57252dwr2g.step/ncd57252dwr2g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (24 pp, sha256
2f43e7a884573d90, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).