main
History Download
Ray Publish 0.1.0 a84a690

NCD5703ADR2G

onsemi · Gate Drive ICs · SOIC-8

NCD5703ADR2G from onsemi, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Input signal that controls the output, in phase with VO; VIN is internally clamped to GND with a 1 M pull-down and a minimum pulse width is required before VO is activated.
2 VREF power_in 5 V reference generated within the driver, brought out for external bypassing and for powering low bias circuits such as digital isolators.
3 FLT output Active-low open-drain fault output that tells the controller the driver has faulted and deactivated the output, with a 10k pull-up resistor recommended.
4 DESAT input Input for detecting IGBT desaturation due to a fault; a capacitor on this pin sets a programmable blanking delay every ON cycle before a DESAT fault is processed.
5 VCC power_in Positive bias supply for the driver, with an operating range from UVLO to the maximum, requiring a good quality bypass capacitor to GND placed close to the pins.
6 VO output Driver output providing drive voltage and source and sink current to the IGBT gate, actively pulled low during start-up and fault conditions.
7 GND power_in Connect to the IGBT emitter with a short trace; all power pin bypass capacitors should be referenced to this pin and kept short.
8 CLAMP bidirectional Provides clamping for the IGBT gate during the off period to protect it from parasitic turn-on, to be tied directly to the IGBT gate with minimum trace length.

Key specifications

Parameter Value
Manufacturer onsemi
Package SOIC-8
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Differential Power Supply VCC−VEE 0 36 V 8
Positive Power Supply VCC−GND -0.3 22 V 8
Negative Power Supply VEE−GND -18 0.3 V 8
Input Voltage VIN−GND -0.3 5.5 V 8
FLT sink current IFLT−SINK 20 mA 8
Power Dissipation SO-8 PD 700 mW 8
Maximum Junction Temperature TJ(max) 150 °C 8
Storage Temperature Range TSTG -65 150 °C 8
ESD Human Body Model ESDHBM 4 kV 8
ESD Charged Device Model ESDCDM -2 2 kV 8
Lead Temperature Soldering TSLD 260 °C Reflow, Pb-Free 8
Thermal Resistance Junction-to-Air RθJA 176 °C/W 100 mm2 1 oz copper, FR4 8
Differential Power Supply VCC−VEE 30 V 8
Positive Power Supply VCC 20 V min is UVLO 8
Negative Power Supply VEE -15 0 V 8
Input Voltage VIN 0 5 V 8
Input pulse width ton 40 ns 8
Ambient Temperature TA -40 125 °C 8
FLT Low State Voltage VFLT-L 0.5 1 V IFLT-SINK = 15 mA 9
Output Low State VOL1 0.1 0.2 V Isink = 200 mA, TA = 25°C 9
Output Low State VOL2 0.2 0.5 V Isink = 200 mA, TA = −40°C to 125°C 9
Output Low State VOL3 0.8 1.2 V Isink = 1.0 A, TA = 25°C 9
Output High State VOH1 14.5 14.8 V Isrc = 200 mA, TA = 25°C 9
Output High State VOH2 14.2 14.7 V Isrc = 200 mA, TA = −40°C to 125°C 9
Output High State VOH3 13.8 14.1 V Isrc = 1.0 A, TA = 25°C 9
Peak Driver Current, Sink IPK-snk1 7.2 A RG = 0.1 Ω, VCC = 15 V, VO = 13 V 9
Peak Driver Current, Sink IPK-snk2 6.2 A RG = 0.1 Ω, VCC = 15 V, VO = 9 V (near Miller Plateau) 9
Peak Driver Current, Source IPK-src1 7 A RG = 0.1 Ω, VCC = 15 V, VO = 3 V 9
Peak Driver Current, Source IPK-src2 5 A RG = 0.1 Ω, VCC = 15 V, VO = 9 V (near Miller Plateau) 9
Turn-on Delay tpd-on 45 59 75 ns Negative input pulse width = 10 µs 9
Turn-off Delay tpd-off 45 54 75 ns Positive input pulse width = 10 µs 9
Propagation Delay Distortion tdistort1 -5 5 ns Input or output pulse width > 150 ns, TA = 25°C 10
Propagation Delay Distortion tdistort2 -25 25 ns Input or output pulse width > 150 ns, TA = −40°C to 125°C 10
Prop Delay Distortion between Parts tdistort-tot -30 0 30 ns 10
Delay from FLT under UVLO/TSD to VO/VOL td1-OUT 10 12 15 µs 10
Clamp Voltage Vclamp 1.2 1.4 V Isink = 500 mA, TA = 25°C 10
Clamp Voltage Vclamp 2.2 V Isink = 500 mA, TA = −40°C to 125°C 10
Clamp Activation Threshold VMC-THR 1.8 2 2.2 V 10
DESAT Threshold Voltage VDESAT-THR 6 6.35 7 V 10
Blanking Charge Current IDESAT-CHG 0.2 0.24 0.28 mA 10
UVLO Startup Voltage VUVLO-OUT-ON 13.2 13.5 13.8 V 10
UVLO Disable Voltage VUVLO-OUT-OFF 12.2 12.5 12.8 V 10
UVLO Hysteresis VUVLO-HYST 1 V 10
Voltage Reference VREF 4.85 5 5.15 V IREF = 10 mA 10
Current Drawn from VCC, Standby ICC-SB 0.9 1.5 mA VCC = 15 V, no load on output, FLT, VREF 10
Rise Time trise 9.2 ns Cload = 1.0 nF 10
Fall Time tfall 7.9 ns Cload = 1.0 nF 10
Delay from DESAT to VO/VOL td2-OUT 220 ns 10
Delay from UVLO/TSD to FLT td3-FLT 7.3 µs 10
Thermal Shutdown Temperature TSD 188 °C 10
Thermal Shutdown Hysteresis TSH 33 °C 10

CAD (KiCad official)

  • Symbol: NCD5703ADR2G
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: ncd5703adr2g-etched.step / ncd5703adr2g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ncd5703adr2g.step / ncd5703adr2g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (24 pp, sha256 7a9bb003981144b8, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF