Generated by kicad-footprint-generator · KiCad file format 20260206
NCD5703ADR2G
onsemi · Gate Drive ICs · SOIC-8
NCD5703ADR2G from onsemi, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input signal that controls the output, in phase with VO; VIN is internally clamped to GND with a 1 M pull-down and a minimum pulse width is required before VO is activated. |
| 2 | VREF | power_in | 5 V reference generated within the driver, brought out for external bypassing and for powering low bias circuits such as digital isolators. |
| 3 | FLT | output | Active-low open-drain fault output that tells the controller the driver has faulted and deactivated the output, with a 10k pull-up resistor recommended. |
| 4 | DESAT | input | Input for detecting IGBT desaturation due to a fault; a capacitor on this pin sets a programmable blanking delay every ON cycle before a DESAT fault is processed. |
| 5 | VCC | power_in | Positive bias supply for the driver, with an operating range from UVLO to the maximum, requiring a good quality bypass capacitor to GND placed close to the pins. |
| 6 | VO | output | Driver output providing drive voltage and source and sink current to the IGBT gate, actively pulled low during start-up and fault conditions. |
| 7 | GND | power_in | Connect to the IGBT emitter with a short trace; all power pin bypass capacitors should be referenced to this pin and kept short. |
| 8 | CLAMP | bidirectional | Provides clamping for the IGBT gate during the off period to protect it from parasitic turn-on, to be tied directly to the IGBT gate with minimum trace length. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOIC-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Differential Power Supply | VCC−VEE | 0 | 36 | V | 8 | ||
| Positive Power Supply | VCC−GND | -0.3 | 22 | V | 8 | ||
| Negative Power Supply | VEE−GND | -18 | 0.3 | V | 8 | ||
| Input Voltage | VIN−GND | -0.3 | 5.5 | V | 8 | ||
| FLT sink current | IFLT−SINK | 20 | mA | 8 | |||
| Power Dissipation SO-8 | PD | 700 | mW | 8 | |||
| Maximum Junction Temperature | TJ(max) | 150 | °C | 8 | |||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 8 | ||
| ESD Human Body Model | ESDHBM | 4 | kV | 8 | |||
| ESD Charged Device Model | ESDCDM | -2 | 2 | kV | 8 | ||
| Lead Temperature Soldering | TSLD | 260 | °C | Reflow, Pb-Free | 8 | ||
| Thermal Resistance Junction-to-Air | RθJA | 176 | °C/W | 100 mm2 1 oz copper, FR4 | 8 | ||
| Differential Power Supply | VCC−VEE | 30 | V | 8 | |||
| Positive Power Supply | VCC | 20 | V | min is UVLO | 8 | ||
| Negative Power Supply | VEE | -15 | 0 | V | 8 | ||
| Input Voltage | VIN | 0 | 5 | V | 8 | ||
| Input pulse width | ton | 40 | ns | 8 | |||
| Ambient Temperature | TA | -40 | 125 | °C | 8 | ||
| FLT Low State Voltage | VFLT-L | 0.5 | 1 | V | IFLT-SINK = 15 mA | 9 | |
| Output Low State | VOL1 | 0.1 | 0.2 | V | Isink = 200 mA, TA = 25°C | 9 | |
| Output Low State | VOL2 | 0.2 | 0.5 | V | Isink = 200 mA, TA = −40°C to 125°C | 9 | |
| Output Low State | VOL3 | 0.8 | 1.2 | V | Isink = 1.0 A, TA = 25°C | 9 | |
| Output High State | VOH1 | 14.5 | 14.8 | V | Isrc = 200 mA, TA = 25°C | 9 | |
| Output High State | VOH2 | 14.2 | 14.7 | V | Isrc = 200 mA, TA = −40°C to 125°C | 9 | |
| Output High State | VOH3 | 13.8 | 14.1 | V | Isrc = 1.0 A, TA = 25°C | 9 | |
| Peak Driver Current, Sink | IPK-snk1 | 7.2 | A | RG = 0.1 Ω, VCC = 15 V, VO = 13 V | 9 | ||
| Peak Driver Current, Sink | IPK-snk2 | 6.2 | A | RG = 0.1 Ω, VCC = 15 V, VO = 9 V (near Miller Plateau) | 9 | ||
| Peak Driver Current, Source | IPK-src1 | 7 | A | RG = 0.1 Ω, VCC = 15 V, VO = 3 V | 9 | ||
| Peak Driver Current, Source | IPK-src2 | 5 | A | RG = 0.1 Ω, VCC = 15 V, VO = 9 V (near Miller Plateau) | 9 | ||
| Turn-on Delay | tpd-on | 45 | 59 | 75 | ns | Negative input pulse width = 10 µs | 9 |
| Turn-off Delay | tpd-off | 45 | 54 | 75 | ns | Positive input pulse width = 10 µs | 9 |
| Propagation Delay Distortion | tdistort1 | -5 | 5 | ns | Input or output pulse width > 150 ns, TA = 25°C | 10 | |
| Propagation Delay Distortion | tdistort2 | -25 | 25 | ns | Input or output pulse width > 150 ns, TA = −40°C to 125°C | 10 | |
| Prop Delay Distortion between Parts | tdistort-tot | -30 | 0 | 30 | ns | 10 | |
| Delay from FLT under UVLO/TSD to VO/VOL | td1-OUT | 10 | 12 | 15 | µs | 10 | |
| Clamp Voltage | Vclamp | 1.2 | 1.4 | V | Isink = 500 mA, TA = 25°C | 10 | |
| Clamp Voltage | Vclamp | 2.2 | V | Isink = 500 mA, TA = −40°C to 125°C | 10 | ||
| Clamp Activation Threshold | VMC-THR | 1.8 | 2 | 2.2 | V | 10 | |
| DESAT Threshold Voltage | VDESAT-THR | 6 | 6.35 | 7 | V | 10 | |
| Blanking Charge Current | IDESAT-CHG | 0.2 | 0.24 | 0.28 | mA | 10 | |
| UVLO Startup Voltage | VUVLO-OUT-ON | 13.2 | 13.5 | 13.8 | V | 10 | |
| UVLO Disable Voltage | VUVLO-OUT-OFF | 12.2 | 12.5 | 12.8 | V | 10 | |
| UVLO Hysteresis | VUVLO-HYST | 1 | V | 10 | |||
| Voltage Reference | VREF | 4.85 | 5 | 5.15 | V | IREF = 10 mA | 10 |
| Current Drawn from VCC, Standby | ICC-SB | 0.9 | 1.5 | mA | VCC = 15 V, no load on output, FLT, VREF | 10 | |
| Rise Time | trise | 9.2 | ns | Cload = 1.0 nF | 10 | ||
| Fall Time | tfall | 7.9 | ns | Cload = 1.0 nF | 10 | ||
| Delay from DESAT to VO/VOL | td2-OUT | 220 | ns | 10 | |||
| Delay from UVLO/TSD to FLT | td3-FLT | 7.3 | µs | 10 | |||
| Thermal Shutdown Temperature | TSD | 188 | °C | 10 | |||
| Thermal Shutdown Hysteresis | TSH | 33 | °C | 10 |
CAD (KiCad official)
- Symbol:
NCD5703ADR2G - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
ncd5703adr2g-etched.step/ncd5703adr2g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ncd5703adr2g.step/ncd5703adr2g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (24 pp, sha256
7a9bb003981144b8, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).