main
Ray Publish 0.1.0 42b6dc0
{
  "slug": "ncd57001fdwr2g",
  "version": "0.1.0",
  "type": "component",
  "description": "onsemi Gate Drive ICs, SOIC-16-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management ics",
    "ncd57001fdwr2g",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ncd57001fdwr2g.kicad_sym",
    "ncd57001fdwr2g.kicad_mod",
    "ncd57001fdwr2g.glb",
    "ncd57001fdwr2g.step",
    "ncd57001fdwr2g.lbr",
    "docs/hero.png",
    "docs/ncd57001fdwr2g-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ncd57001fdwr2g-hero.glb",
    "ncd57001fdwr2g-hero.overlay.json"
  ],
  "component": {
    "mpn": "NCD57001FDWR2G",
    "manufacturer": "onsemi",
    "package": "SOIC-16-300mil",
    "pin_count": 16,
    "category": "Power Management ICs",
    "subcategory": "Gate Drive ICs",
    "datasheet": "https://www.onsemi.com/pdf/datasheet/ncd57001fdwr2-d.pdf",
    "parts": {
      "symbol": "ncd57001fdwr2g.kicad_sym",
      "footprint": "ncd57001fdwr2g.kicad_mod",
      "model_3d": "ncd57001fdwr2g-hero.glb",
      "model_3d_plain": "ncd57001fdwr2g.glb",
      "model_3d_step": "ncd57001fdwr2g-etched.step",
      "model_3d_step_plain": "ncd57001fdwr2g.step",
      "lbr": "ncd57001fdwr2g.lbr"
    },
    "distributor_links": {
      "lcsc": "C899925"
    },
    "distributor_check": {
      "checked_at": "2026-11-20T23:52:43Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "deferred",
        "error": "shared DigiKey quota guard: 828 calls left today"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VEE2A",
        "type": "power_in",
        "description": "Output-side negative power supply; a good-quality bypass capacitor to GND2 should be placed close to the pins, and it should be connected to GND2 for unipolar supply operation."
      },
      {
        "number": "2",
        "name": "DESAT",
        "type": "bidirectional",
        "description": "Desaturation detection input with an internal 0.5 mA (typ) blanking charge current; when DESAT reaches VDESAT-THR (9 V typ) the output is driven low, FLT is activated, and a 5 us mute time applies to IN+ and IN-."
      },
      {
        "number": "3",
        "name": "GND2",
        "type": "power_in",
        "description": "Output-side gate drive reference, connected to the IGBT emitter or FET source."
      },
      {
        "number": "4",
        "name": "N/C",
        "type": "unconnected",
        "description": "Not connected."
      },
      {
        "number": "5",
        "name": "VDD2",
        "type": "power_in",
        "description": "Output-side positive power supply; operating range runs from UVLO2 to its maximum allowed value (24 V max per operating ranges), with a bypass capacitor to GND2 placed close to the pin."
      },
      {
        "number": "6",
        "name": "OUT",
        "type": "output",
        "description": "Gate driver output supplying drive voltage and source/sink current to the IGBT/FET gate (peak 7.8 A source, 7.1 A sink); actively pulled low during start-up and fault conditions."
      },
      {
        "number": "7",
        "name": "CLAMP",
        "type": "bidirectional",
        "description": "Miller clamp for the IGBT/FET gate during the off period; its internal N FET turns on when the pin voltage falls below VEE2 + VCLAMP-THR (1.5 to 2.5 V), and it must be tied directly to the gate with minimum trace length."
      },
      {
        "number": "8",
        "name": "VEE2",
        "type": "power_in",
        "description": "Output-side negative power supply; a good-quality bypass capacitor to GND2 should be placed close to the pins, and it should be connected to GND2 for unipolar supply operation."
      },
      {
        "number": "9",
        "name": "GND1",
        "type": "power_in",
        "description": "Input-side ground reference."
      },
      {
        "number": "10",
        "name": "IN+",
        "type": "input",
        "description": "Non-inverting gate driver input, internally clamped to VDD1 with a 50 kOhm pull-down to keep OUT low without an input signal; a minimum positive pulse width is required before OUT responds."
      },
      {
        "number": "11",
        "name": "IN-",
        "type": "input",
        "description": "Inverting gate driver input, internally clamped to VDD1 with a 50 kOhm pull-up to keep OUT low without an input signal; a minimum negative pulse width is required before OUT responds."
      },
      {
        "number": "12",
        "name": "RDY",
        "type": "output",
        "description": "Power-good output, active high when VDD2 is good, with an internal 50 kOhm pull-up; if a low RDY event is caused by UVLO2 the maximum low duration is 200 ns, and OUT remains low while RDY is low."
      },
      {
        "number": "13",
        "name": "FLT",
        "type": "output",
        "description": "Active-low fault output that signals the controller that a desaturation condition occurred and the output has been deactivated; output current is limited to 10 mA maximum."
      },
      {
        "number": "14",
        "name": "RST",
        "type": "input",
        "description": "Active-low reset input for the fault latch, with an internal 50 kOhm pull-up; the reset pulse must be at least 800 ns wide."
      },
      {
        "number": "15",
        "name": "VDD1",
        "type": "power_in",
        "description": "Input-side power supply, 3.3 V to 5 V (operating range up to 5.5 V)."
      },
      {
        "number": "16",
        "name": "GND1A",
        "type": "power_in",
        "description": "Input-side ground pin; Table 1 gives no separate description and lists this pin number under the GND1 row, with the name taken from the pin connection diagram."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Table 1 lists pin 16 as a stray number under the GND1 row and gives no name or description. The name; Table 1 combines VEE2A (pin 1) and VEE2 (pin 8) in one row with a shared description, so both pins c; Power pins are typed power_in per the KiCad convention requested in the task, even though the datash"
        ],
        "pages_sent": 11,
        "cost_usd": 0.0655,
        "at": "2026-11-20T23:52:34"
      },
      "datasheet": {
        "url": "https://www.onsemi.com/pdf/datasheet/ncd57001fdwr2-d.pdf",
        "pages": 11,
        "sha256": "e2c375fbe71b0d4a",
        "source_tier": "mfr",
        "citation": "onsemi datasheet"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ncd57001fdwr2g.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.3,
          10.3,
          2.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "159663ceb2b4996b1b89d3111e4a355fc27de3e24d3570f50e5ed9086e0d73af",
        "checked": "2026-11-20",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ncd57001fdwr2g-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.3,
          10.3,
          2.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "92bef74308b2a64bc9535fe5ca28b116b1b97282f7dd01047545f2461d0f62fd",
        "checked": "2026-11-20",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}