main
History Download
Ray Publish 0.1.0 7ee115e

NCA1042-DSPR

NOVOSENSE · CAN ICs · SOP-8

NCA1042-DSPR from NOVOSENSE, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 TXD input CAN transmit data input (LOW for dominant, HIGH for recessive bus states), with high/low thresholds of 0.7VIO and 0.3VIO, and a dominant time-out that releases the bus if LOW persists longer than tTXD_DTO (800 to 4000 µs).
2 GND power_in Ground reference for the device; a 0.1 µF bypass capacitor between VCC and GND should be placed as close to the package as possible.
3 VCC power_in Main power supply input, recommended 4.5 V to 5.5 V, with undervoltage detection between 3.5 V and 4.5 V.
4 RXD output CAN receive data output (LOW for dominant, HIGH for recessive bus states), driven to VOH of at least 0.8VIO at IOH = -2 mA and to VOL of at most 0.2VIO at IOL = 2 mA.
5 VIO power_in Logic I/O supply voltage, 3 V to 5.5 V, which sets the signal levels of TXD, RXD and STB to match the microcontroller I/O.
6 CANL bidirectional Low-level CAN bus line, rated for bus fault protection from -45 V to +45 V.
7 CANH bidirectional High-level CAN bus line, rated for bus fault protection from -45 V to +45 V.
8 STB input Standby mode select, active high: HIGH selects low-power Standby mode and LOW selects Normal mode, with thresholds of 0.7VIO (high) and 0.3VIO (low).

Key specifications

Parameter Value
Manufacturer NOVOSENSE
Package SOP-8
Category Communication Interface Chip/UART/485/232
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Power Supply Voltage VCC, VIO -0.3 7 V 3
Logic I/O Voltage TXD, RXD, STB -0.3 7 V 3
Maximum BUS Pin Voltage VCANH, VCANL -45 45 V 3
Operating Temperature Topr -40 125 ℃ 3
Storage Temperature Tstg -40 150 ℃ 3
System level Electro-Static Discharge (IEC61000-4-2) ESD -5 5 kV Powered contact discharge: CAN bus terminals to GND 3
Human Body Model (HBM) ESD stress voltage HBM -8 8 kV All terminals 3
Charged Device Model (CDM) ESD stress voltage CDM -2 2 kV All terminals 3
Power Supply Voltage VCC 4.5 5.5 V 3
Power supply voltage VIO 3 5.5 V 4
RXD terminal HIGH level output current IOH(RXD) -2 mA 4
RXD terminal LOW level output current IOL(RXD) 2 mA 4
IC Junction-to-Air Thermal Resistance θJA 105.8 ℃/W 4
Junction-to-case (top) thermal resistance θJC(top) 46.8 ℃/W 4
Junction-to-board thermal resistance θJB 48.3 ℃/W 4
Supply Voltage VCC 4.5 5.5 V 4
Undervoltage detection voltage on pin VCC Vuvd(VCC) 3.5 4.5 V 4
Supply voltage on pin VIO VIO 3 5.5 V 4
Undervoltage detection voltage on pin VIO Vuvd(VIO) 1.5 2.7 4
Supply current ICC 45 70 mA Normal mode,dominant, TXD=0,STB=0,RL=60Ω 4
Supply current ICC 1.7 5 mA Normal mode,recessive, TXD=VIO,STB=0 4
Supply current (standby) ICC 0.51 5 uA Standby mode,STB=VIO,TXD=VIO 4
Supply current on pin VIO IIO 525 900 uA Normal mode,dominant,VTXD=0V 4
Supply current on pin VIO IIO 30 100 uA Normal mode,recessive,VTXD=VIO 4
Supply current on pin VIO (standby) IIO 6.5 15 uA Standby mode;VTXD=VIO 4
Thermal-Shutdown Threshold TTS 155 165 180 ℃ 4
High level input current IIH -5 5 uA TXD & STB pin 4
Low level input current IIL -200 -30 uA TXD pin 5
Low level input current IIL -15 15 uA STB pin 5
CANH output voltage (Dominant) VOH(D) 2.8 3.44 4.5 V STB=0,TXD=0V, RLoad =60Ω 5
CANL output voltage (Dominant) VOL(D) 0.5 1.33 2.25 V STB=0,TXD=0V, RLoad =60Ω 5
CAN bus output voltage (Recessive) VO(R) 2 3 V TXD=VIO;recessive;no load 5
CAN bus output voltage (Recessive, standby) VO(R) -0.1 0.1 V Standby mode,no load 5
Differential output voltage (Dominant) VOD(D) 1.5 3 V VCC=5V,TXD=0, RLoad =60Ω, see Figure 5.1 5
Differential output voltage (Recessive) VOD(R) -0.05 0.05 V VCC=5V,TXD=VIO, RLoad =60Ω, see Figure 5.1 5
Short-circuit output current (Dominant, CANH) IOS -105 -44.1 mA Dominant,CANH=-30V, CANL open, see Figure 5.9 5
Short-circuit output current (Recessive, CANH) IOS 1.77 5 mA Recessive,CANH=30V, CANL open, see Figure 5.9 5
Short-circuit output current (Recessive, CANL) IOS -5 -2.11 mA Recessive,CANL=-30V, CANH open, see Figure 5.9 5
Short-circuit output current (Dominant, CANL) IOS 42.5 105 mA Dominant,CANL=30V, CANH open, see Figure 5.9 5
Positive-going bus input threshold voltage VIT+ 750 900 mV VCOM(CAN)=0V 5
Negative-going bus input threshold voltage VIT- 500 650 mV VCOM(CAN)=0V 5
Power-off (unpowered) bus input leakage current IIOFF(LKG) -1.5 1.5 uA VCANH / VCANL = 5 V, VCC = 0V, VIO= 0 V 5
Differential input resistance RID 30 80 kΩ 5
Input resistance RIN 15 30 40 kΩ 6
Input resistance matching RImatch -3 3 % CANH=CANL 6
Common-mode voltage range VCOM -30 30 V 6
Loop delay 1 Tloop1 90 220 ns Driver input to receiver output, Recessive to Dominant, see Figure 5.7 6
Loop delay 2 Tloop2 100 220 ns Driver input to receiver output, Dominant to Recessive, see Figure 5.7 6
Transmitted recessive bit width tbit(bus) 435 530 ns tbit(TXD) = 500 ns 6
Transmitted recessive bit width tbit(bus) 155 210 ns tbit(TXD) = 200 ns 6
Bit time on pin RXD tbit(RXD) 400 550 ns tbit(TXD) = 500 ns 6
Bit time on pin RXD tbit(RXD) 120 220 ns tbit(TXD) = 200 ns 6
Propagation delay time from TXD to bus dominant tPLH 90 ns Normal mode,see Figure 5.4 6
Propagation delay time from TXD to bus recessive tPHL 65 ns Normal mode,see Figure 5.4 6
Bus dominant time-out time tTXD_DTO 800 2000 4000 us see Figure 5.8 6
Propagation delay time from bus dominant to RXD tPLH 21 ns see Figure 5.6 6
Propagation delay time from bus recessive to RXD tPHL 27 ns see Figure 5.6 6
Receiver dominant time out tRXD_DTO 800 2600 4000 us Standby mode 6
Bus wake-up filter time tfltr(wake)bus 0.5 5 us Standby mode 6
Standby to normal mode delay time td(stb-norm) 7 47 us 7

CAD (KiCad official)

  • Symbol: NCA1042-DSPR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: nca1042-dspr-etched.step / nca1042-dspr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); nca1042-dspr.step / nca1042-dspr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: NOVOSENSE datasheet (16 pp, sha256 312c9114c08e91ad, retrieved 2026-11-05, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF