Generated by kicad-footprint-generator · KiCad file format 20260206
NCA1042-DSPR
NOVOSENSE · CAN ICs · SOP-8
NCA1042-DSPR from NOVOSENSE, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | TXD | input | CAN transmit data input (LOW for dominant, HIGH for recessive bus states), with high/low thresholds of 0.7VIO and 0.3VIO, and a dominant time-out that releases the bus if LOW persists longer than tTXD_DTO (800 to 4000 µs). |
| 2 | GND | power_in | Ground reference for the device; a 0.1 µF bypass capacitor between VCC and GND should be placed as close to the package as possible. |
| 3 | VCC | power_in | Main power supply input, recommended 4.5 V to 5.5 V, with undervoltage detection between 3.5 V and 4.5 V. |
| 4 | RXD | output | CAN receive data output (LOW for dominant, HIGH for recessive bus states), driven to VOH of at least 0.8VIO at IOH = -2 mA and to VOL of at most 0.2VIO at IOL = 2 mA. |
| 5 | VIO | power_in | Logic I/O supply voltage, 3 V to 5.5 V, which sets the signal levels of TXD, RXD and STB to match the microcontroller I/O. |
| 6 | CANL | bidirectional | Low-level CAN bus line, rated for bus fault protection from -45 V to +45 V. |
| 7 | CANH | bidirectional | High-level CAN bus line, rated for bus fault protection from -45 V to +45 V. |
| 8 | STB | input | Standby mode select, active high: HIGH selects low-power Standby mode and LOW selects Normal mode, with thresholds of 0.7VIO (high) and 0.3VIO (low). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NOVOSENSE |
| Package | SOP-8 |
| Category | Communication Interface Chip/UART/485/232 |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power Supply Voltage | VCC, VIO | -0.3 | 7 | V | 3 | ||
| Logic I/O Voltage | TXD, RXD, STB | -0.3 | 7 | V | 3 | ||
| Maximum BUS Pin Voltage | VCANH, VCANL | -45 | 45 | V | 3 | ||
| Operating Temperature | Topr | -40 | 125 | ℃ | 3 | ||
| Storage Temperature | Tstg | -40 | 150 | ℃ | 3 | ||
| System level Electro-Static Discharge (IEC61000-4-2) | ESD | -5 | 5 | kV | Powered contact discharge: CAN bus terminals to GND | 3 | |
| Human Body Model (HBM) ESD stress voltage | HBM | -8 | 8 | kV | All terminals | 3 | |
| Charged Device Model (CDM) ESD stress voltage | CDM | -2 | 2 | kV | All terminals | 3 | |
| Power Supply Voltage | VCC | 4.5 | 5.5 | V | 3 | ||
| Power supply voltage | VIO | 3 | 5.5 | V | 4 | ||
| RXD terminal HIGH level output current | IOH(RXD) | -2 | mA | 4 | |||
| RXD terminal LOW level output current | IOL(RXD) | 2 | mA | 4 | |||
| IC Junction-to-Air Thermal Resistance | θJA | 105.8 | ℃/W | 4 | |||
| Junction-to-case (top) thermal resistance | θJC(top) | 46.8 | ℃/W | 4 | |||
| Junction-to-board thermal resistance | θJB | 48.3 | ℃/W | 4 | |||
| Supply Voltage | VCC | 4.5 | 5.5 | V | 4 | ||
| Undervoltage detection voltage on pin VCC | Vuvd(VCC) | 3.5 | 4.5 | V | 4 | ||
| Supply voltage on pin VIO | VIO | 3 | 5.5 | V | 4 | ||
| Undervoltage detection voltage on pin VIO | Vuvd(VIO) | 1.5 | 2.7 | 4 | |||
| Supply current | ICC | 45 | 70 | mA | Normal mode,dominant, TXD=0,STB=0,RL=60Ω | 4 | |
| Supply current | ICC | 1.7 | 5 | mA | Normal mode,recessive, TXD=VIO,STB=0 | 4 | |
| Supply current (standby) | ICC | 0.51 | 5 | uA | Standby mode,STB=VIO,TXD=VIO | 4 | |
| Supply current on pin VIO | IIO | 525 | 900 | uA | Normal mode,dominant,VTXD=0V | 4 | |
| Supply current on pin VIO | IIO | 30 | 100 | uA | Normal mode,recessive,VTXD=VIO | 4 | |
| Supply current on pin VIO (standby) | IIO | 6.5 | 15 | uA | Standby mode;VTXD=VIO | 4 | |
| Thermal-Shutdown Threshold | TTS | 155 | 165 | 180 | ℃ | 4 | |
| High level input current | IIH | -5 | 5 | uA | TXD & STB pin | 4 | |
| Low level input current | IIL | -200 | -30 | uA | TXD pin | 5 | |
| Low level input current | IIL | -15 | 15 | uA | STB pin | 5 | |
| CANH output voltage (Dominant) | VOH(D) | 2.8 | 3.44 | 4.5 | V | STB=0,TXD=0V, RLoad =60Ω | 5 |
| CANL output voltage (Dominant) | VOL(D) | 0.5 | 1.33 | 2.25 | V | STB=0,TXD=0V, RLoad =60Ω | 5 |
| CAN bus output voltage (Recessive) | VO(R) | 2 | 3 | V | TXD=VIO;recessive;no load | 5 | |
| CAN bus output voltage (Recessive, standby) | VO(R) | -0.1 | 0.1 | V | Standby mode,no load | 5 | |
| Differential output voltage (Dominant) | VOD(D) | 1.5 | 3 | V | VCC=5V,TXD=0, RLoad =60Ω, see Figure 5.1 | 5 | |
| Differential output voltage (Recessive) | VOD(R) | -0.05 | 0.05 | V | VCC=5V,TXD=VIO, RLoad =60Ω, see Figure 5.1 | 5 | |
| Short-circuit output current (Dominant, CANH) | IOS | -105 | -44.1 | mA | Dominant,CANH=-30V, CANL open, see Figure 5.9 | 5 | |
| Short-circuit output current (Recessive, CANH) | IOS | 1.77 | 5 | mA | Recessive,CANH=30V, CANL open, see Figure 5.9 | 5 | |
| Short-circuit output current (Recessive, CANL) | IOS | -5 | -2.11 | mA | Recessive,CANL=-30V, CANH open, see Figure 5.9 | 5 | |
| Short-circuit output current (Dominant, CANL) | IOS | 42.5 | 105 | mA | Dominant,CANL=30V, CANH open, see Figure 5.9 | 5 | |
| Positive-going bus input threshold voltage | VIT+ | 750 | 900 | mV | VCOM(CAN)=0V | 5 | |
| Negative-going bus input threshold voltage | VIT- | 500 | 650 | mV | VCOM(CAN)=0V | 5 | |
| Power-off (unpowered) bus input leakage current | IIOFF(LKG) | -1.5 | 1.5 | uA | VCANH / VCANL = 5 V, VCC = 0V, VIO= 0 V | 5 | |
| Differential input resistance | RID | 30 | 80 | kΩ | 5 | ||
| Input resistance | RIN | 15 | 30 | 40 | kΩ | 6 | |
| Input resistance matching | RImatch | -3 | 3 | % | CANH=CANL | 6 | |
| Common-mode voltage range | VCOM | -30 | 30 | V | 6 | ||
| Loop delay 1 | Tloop1 | 90 | 220 | ns | Driver input to receiver output, Recessive to Dominant, see Figure 5.7 | 6 | |
| Loop delay 2 | Tloop2 | 100 | 220 | ns | Driver input to receiver output, Dominant to Recessive, see Figure 5.7 | 6 | |
| Transmitted recessive bit width | tbit(bus) | 435 | 530 | ns | tbit(TXD) = 500 ns | 6 | |
| Transmitted recessive bit width | tbit(bus) | 155 | 210 | ns | tbit(TXD) = 200 ns | 6 | |
| Bit time on pin RXD | tbit(RXD) | 400 | 550 | ns | tbit(TXD) = 500 ns | 6 | |
| Bit time on pin RXD | tbit(RXD) | 120 | 220 | ns | tbit(TXD) = 200 ns | 6 | |
| Propagation delay time from TXD to bus dominant | tPLH | 90 | ns | Normal mode,see Figure 5.4 | 6 | ||
| Propagation delay time from TXD to bus recessive | tPHL | 65 | ns | Normal mode,see Figure 5.4 | 6 | ||
| Bus dominant time-out time | tTXD_DTO | 800 | 2000 | 4000 | us | see Figure 5.8 | 6 |
| Propagation delay time from bus dominant to RXD | tPLH | 21 | ns | see Figure 5.6 | 6 | ||
| Propagation delay time from bus recessive to RXD | tPHL | 27 | ns | see Figure 5.6 | 6 | ||
| Receiver dominant time out | tRXD_DTO | 800 | 2600 | 4000 | us | Standby mode | 6 |
| Bus wake-up filter time | tfltr(wake)bus | 0.5 | 5 | us | Standby mode | 6 | |
| Standby to normal mode delay time | td(stb-norm) | 7 | 47 | us | 7 |
CAD (KiCad official)
- Symbol:
NCA1042-DSPR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
nca1042-dspr-etched.step/nca1042-dspr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);nca1042-dspr.step/nca1042-dspr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NOVOSENSE datasheet (16 pp, sha256
312c9114c08e91ad, retrieved 2026-11-05, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).