main
Ray
Publish 0.1.0
08b4627
NBC12430FAR2G
onsemi · Clock Generators / Frequency Synthesizers / PLL · LQFP-32(7x7)
NBC12430FAR2G from onsemi, in a LQFP-32(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | S_CLOCK | input | CMOS/TTL serial clock input with internal pulldown that clocks the serial configuration shift register, sampling S_DATA on the rising edge. |
| 2 | S_DATA | input | CMOS/TTL serial data input with internal pulldown that feeds the serial configuration shift registers. |
| 3 | S_LOAD | input | CMOS/TTL serial latch input with internal pulldown that loads the configuration latches from the shift registers, which are transparent when HIGH and latch on the HIGH-to-LOW transition. |
| 4 | PLL_VCC | power_in | Positive supply for the PLL, connected to +3.3 V or +5.0 V. |
| 5 | PLL_VCC | power_in | Positive supply for the PLL, connected to +3.3 V or +5.0 V. |
| 6 | FREF_EXT | input | CMOS/TTL external PLL reference input with internal pulldown, selected when XTAL_SEL is LOW. |
| 7 | XTAL_SEL | input | CMOS/TTL input with internal pullup that selects the crystal (HIGH) or FREF_EXT (LOW) as the PLL reference. |
| 8 | XTAL1 | input | Crystal oscillator input that forms an oscillator with an external series-resonant crystal. |
| 9 | XTAL2 | output | Crystal oscillator pin that forms an oscillator with an external series-resonant crystal. |
| 10 | OE | input | CMOS/TTL active-HIGH synchronous output enable input with internal pullup; outputs are disabled when LOW. |
| 11 | P_LOAD | input | CMOS/TTL parallel latch input with internal pullup; latches are transparent when LOW and capture M and N inputs on the LOW-to-HIGH transition. |
| 12 | M[0] | input | PLL loop divider LSB input (CMOS/TTL, internal pullup), sampled on the LOW-to-HIGH transition of P_LOAD. |
| 13 | M[1] | input | PLL loop divider input (CMOS/TTL, internal pullup), sampled on the LOW-to-HIGH transition of P_LOAD. |
| 14 | M[2] | input | PLL loop divider input (CMOS/TTL, internal pullup), sampled on the LOW-to-HIGH transition of P_LOAD. |
| 15 | M[3] | input | PLL loop divider input (CMOS/TTL, internal pullup), sampled on the LOW-to-HIGH transition of P_LOAD. |
| 16 | N/C | unconnected | No connection. |
| 17 | M[4] | input | PLL loop divider input (CMOS/TTL, internal pullup), sampled on the LOW-to-HIGH transition of P_LOAD. |
| 18 | M[5] | input | PLL loop divider input (CMOS/TTL, internal pullup), sampled on the LOW-to-HIGH transition of P_LOAD. |
| 19 | M[6] | input | PLL loop divider input (CMOS/TTL, internal pullup), sampled on the LOW-to-HIGH transition of P_LOAD. |
| 20 | M[7] | input | PLL loop divider input (CMOS/TTL, internal pullup), sampled on the LOW-to-HIGH transition of P_LOAD. |
| 21 | M[8] | input | PLL loop divider MSB input (CMOS/TTL, internal pullup), sampled on the LOW-to-HIGH transition of P_LOAD. |
| 22 | N[0] | input | Output divider modulus input (CMOS/TTL, internal pullup), sampled on the LOW-to-HIGH transition of P_LOAD. |
| 23 | N[1] | input | Output divider modulus input (CMOS/TTL, internal pullup), sampled on the LOW-to-HIGH transition of P_LOAD. |
| 24 | N/C | unconnected | No connection. |
| 25 | GND | power_in | Negative supply for the chip, normally connected to ground. |
| 26 | TEST | output | PECL test output whose function is set by the serial configuration bits T[2:0]; must be static for guaranteed jitter specifications. |
| 27 | VCC | power_in | Positive supply for the internal logic and output buffer, connected to +3.3 V or +5.0 V. |
| 28 | VCC | power_in | Positive supply for the internal logic and output buffer, connected to +3.3 V or +5.0 V. |
| 29 | GND | power_in | Negative supply for the chip, normally connected to ground. |
| 30 | FOUT̅ | output | Inverted PECL differential output of the synthesizer, able to drive series terminated 50 ohm lines. |
| 31 | FOUT | output | True PECL differential output of the synthesizer, able to drive series terminated 50 ohm lines. |
| 32 | VCC | power_in | Positive supply for the internal logic and output buffer, connected to +3.3 V or +5.0 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | LQFP-32(7x7) |
| Category | RTC/Clock Chip |
| Pins | 32 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input HIGH Voltage (LVCMOS/LVTTL) | VIH | 2 | V | VCC = 3.3 V | 6 | ||
| Input LOW Voltage (LVCMOS/LVTTL) | VIL | 0.8 | V | VCC = 3.3 V | 6 | ||
| Input Current | IIN | 1 | mA | VCC = 3.3 V ± 5% | 6 | ||
| PECL Output HIGH Voltage (FOUT, FOUT, TEST) | VOH | 2.155 | 2.405 | V | VCC = 3.3 V (Notes 2, 3) | 6 | |
| PECL Output LOW Voltage (FOUT, FOUT, TEST) | VOL | 1.355 | 1.605 | V | VCC = 3.3 V (Notes 2, 3) | 6 | |
| Power Supply Current VCC | ICC | 45 | 58 | 80 | mA | VCC = 3.3 V ± 5% | 6 |
| Power Supply Current PLL_VCC | ICC | 17 | 25 | 30 | mA | PLL_VCC, VCC = 3.3 V ± 5% | 6 |
| Input HIGH Voltage (CMOS/TTL) | VIH | 2 | V | VCC = 5.0 V | 6 | ||
| Input LOW Voltage (CMOS/TTL) | VIL | 0.8 | V | VCC = 5.0 V | 6 | ||
| PECL Output HIGH Voltage (FOUT, FOUT, TEST) | VOH | 3.855 | 4.105 | V | VCC = 5.0 V (Notes 4, 5) | 6 | |
| PECL Output LOW Voltage (FOUT, FOUT, TEST) | VOL | 3.055 | 3.305 | V | VCC = 5.0 V (Notes 4, 5) | 6 | |
| Power Supply Current VCC | ICC | 50 | 60 | 85 | mA | VCC = 5.0 V ± 5% | 6 |
| Power Supply Current PLL_VCC | ICC | 18 | 24 | 30 | mA | PLL_VCC, VCC = 5.0 V ± 5% | 6 |
| Maximum Input Frequency XTAL Oscillator | FMAXI | 10 | 20 | MHz | XTAL Oscillator | 7 | |
| Maximum Output Frequency VCO (Internal) | FMAXO | 400 | 800 | MHz | VCO (Internal) | 7 | |
| Maximum Output Frequency FOUT | FMAXO | 50 | 800 | MHz | FOUT | 7 | |
| Maximum PLL Lock Time | tLOCK | 10 | ms | 7 | |||
| Period Jitter (RMS) | tjitter(pd) | 8 | ps | 50 MHz ≤ fOUT < 100 MHz | 7 | ||
| Period Jitter (RMS) | tjitter(pd) | 5 | ps | 100 MHz ≤ fOUT < 800 MHz | 7 | ||
| Cycle-to-Cycle Jitter (Peak-to-Peak) | tjitter(cyc-cyc) | -40 | 40 | ps | 50 MHz ≤ fOUT < 100 MHz | 7 | |
| Cycle-to-Cycle Jitter (Peak-to-Peak) | tjitter(cyc-cyc) | -20 | 20 | ps | 100 MHz ≤ fOUT < 800 MHz | 7 | |
| Setup Time S_DATA to S_CLOCK | ts | 20 | ns | S_DATA to S_CLOCK | 7 | ||
| Setup Time S_CLOCK to S_LOAD | ts | 20 | ns | S_CLOCK to S_LOAD | 7 | ||
| Setup Time M, N to P_LOAD | ts | 20 | ns | M, N to P_LOAD | 7 | ||
| Hold Time S_DATA to S_CLOCK | th | 20 | ns | S_DATA to S_CLOCK | 7 | ||
| Hold Time M, N to P_LOAD | th | 20 | ns | M, N to P_LOAD | 7 | ||
| Minimum Pulse Width S_LOAD | tpwMIN | 50 | ns | S_LOAD | 7 | ||
| Minimum Pulse Width P_LOAD | tpwMIN | 50 | ns | P_LOAD | 7 | ||
| Output Duty Cycle | DCO | 47.5 | 52.5 | % | 7 | ||
| Output Rise/Fall | tr, tf | 175 | 425 | ps | FOUT 20%-80% | 7 | |
| Positive Supply (operating range) | VCC | 3.135 | 5.25 | V | Operating Range | 1 | |
| Operating Temperature Range (NBC12430) | TA | 0 | 70 | °C | NBC12430 | 5 | |
| Positive Supply | VCC | 6 | V | GND = 0 V | 5 | ||
| Input Voltage | VI | 6 | V | GND = 0 V, VI ≤ VCC | 5 | ||
| Output Current Continuous | Iout | 50 | mA | Continuous | 5 | ||
| Output Current Surge | Iout | 100 | mA | Surge | 5 | ||
| Storage Temperature Range | Tstg | -65 | 150 | °C | 5 | ||
| Wave Solder Pb-Free | Tsol | 265 | °C | <3 sec @ 260°C | 5 | ||
| Thermal Resistance Junction-to-Ambient LQFP-32 | θJA | 80 | °C/W | 0 lfpm, LQFP-32 | 5 | ||
| Thermal Resistance Junction-to-Ambient LQFP-32 | θJA | 55 | °C/W | 500 lfpm, LQFP-32 | 5 | ||
| Thermal Resistance Junction-to-Case LQFP-32 | θJC | 12 | 17 | °C/W | Standard Board, LQFP-32 | 5 |
CAD (KiCad official)
- Symbol:
NBC12430FAR2G - Footprint:
Package_QFP:LQFP-32_7x7mm_P0.8mm - 3D model: LQFP-32(7x7) (KiCad packages3D, STEP)
- 3D model files:
nbc12430far2g-etched.step/nbc12430far2g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);nbc12430far2g.step/nbc12430far2g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (20 pp, sha256
70e5d372ca49113a, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# NBC12430FAR2G
**onsemi** · Clock Generators / Frequency Synthesizers / PLL · LQFP-32(7x7)
NBC12430FAR2G from onsemi, in a LQFP-32(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | S_CLOCK | input | CMOS/TTL serial clock input with internal pulldown that clocks the serial configuration shift register, sampling S_DATA on the rising edge. |
| 2 | S_DATA | input | CMOS/TTL serial data input with internal pulldown that feeds the serial configuration shift registers. |
| 3 | S_LOAD | input | CMOS/TTL serial latch input with internal pulldown that loads the configuration latches from the shift registers, which are transparent when HIGH and latch on the HIGH-to-LOW transition. |
| 4 | PLL_VCC | power_in | Positive supply for the PLL, connected to +3.3 V or +5.0 V. |
| 5 | PLL_VCC | power_in | Positive supply for the PLL, connected to +3.3 V or +5.0 V. |
| 6 | FREF_EXT | input | CMOS/TTL external PLL reference input with internal pulldown, selected when XTAL_SEL is LOW. |
| 7 | XTAL_SEL | input | CMOS/TTL input with internal pullup that selects the crystal (HIGH) or FREF_EXT (LOW) as the PLL reference. |
| 8 | XTAL1 | input | Crystal oscillator input that forms an oscillator with an external series-resonant crystal. |
| 9 | XTAL2 | output | Crystal oscillator pin that forms an oscillator with an external series-resonant crystal. |
| 10 | OE | input | CMOS/TTL active-HIGH synchronous output enable input with internal pullup; outputs are disabled when LOW. |
| 11 | P_LOAD | input | CMOS/TTL parallel latch input with internal pullup; latches are transparent when LOW and capture M and N inputs on the LOW-to-HIGH transition. |
| 12 | M[0] | input | PLL loop divider LSB input (CMOS/TTL, internal pullup), sampled on the LOW-to-HIGH transition of P_LOAD. |
| 13 | M[1] | input | PLL loop divider input (CMOS/TTL, internal pullup), sampled on the LOW-to-HIGH transition of P_LOAD. |
| 14 | M[2] | input | PLL loop divider input (CMOS/TTL, internal pullup), sampled on the LOW-to-HIGH transition of P_LOAD. |
| 15 | M[3] | input | PLL loop divider input (CMOS/TTL, internal pullup), sampled on the LOW-to-HIGH transition of P_LOAD. |
| 16 | N/C | unconnected | No connection. |
| 17 | M[4] | input | PLL loop divider input (CMOS/TTL, internal pullup), sampled on the LOW-to-HIGH transition of P_LOAD. |
| 18 | M[5] | input | PLL loop divider input (CMOS/TTL, internal pullup), sampled on the LOW-to-HIGH transition of P_LOAD. |
| 19 | M[6] | input | PLL loop divider input (CMOS/TTL, internal pullup), sampled on the LOW-to-HIGH transition of P_LOAD. |
| 20 | M[7] | input | PLL loop divider input (CMOS/TTL, internal pullup), sampled on the LOW-to-HIGH transition of P_LOAD. |
| 21 | M[8] | input | PLL loop divider MSB input (CMOS/TTL, internal pullup), sampled on the LOW-to-HIGH transition of P_LOAD. |
| 22 | N[0] | input | Output divider modulus input (CMOS/TTL, internal pullup), sampled on the LOW-to-HIGH transition of P_LOAD. |
| 23 | N[1] | input | Output divider modulus input (CMOS/TTL, internal pullup), sampled on the LOW-to-HIGH transition of P_LOAD. |
| 24 | N/C | unconnected | No connection. |
| 25 | GND | power_in | Negative supply for the chip, normally connected to ground. |
| 26 | TEST | output | PECL test output whose function is set by the serial configuration bits T[2:0]; must be static for guaranteed jitter specifications. |
| 27 | VCC | power_in | Positive supply for the internal logic and output buffer, connected to +3.3 V or +5.0 V. |
| 28 | VCC | power_in | Positive supply for the internal logic and output buffer, connected to +3.3 V or +5.0 V. |
| 29 | GND | power_in | Negative supply for the chip, normally connected to ground. |
| 30 | FOUT̅ | output | Inverted PECL differential output of the synthesizer, able to drive series terminated 50 ohm lines. |
| 31 | FOUT | output | True PECL differential output of the synthesizer, able to drive series terminated 50 ohm lines. |
| 32 | VCC | power_in | Positive supply for the internal logic and output buffer, connected to +3.3 V or +5.0 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | LQFP-32(7x7) |
| Category | RTC/Clock Chip |
| Pins | 32 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input HIGH Voltage (LVCMOS/LVTTL) | VIH | 2 | | | V | VCC = 3.3 V | 6 |
| Input LOW Voltage (LVCMOS/LVTTL) | VIL | | | 0.8 | V | VCC = 3.3 V | 6 |
| Input Current | IIN | | | 1 | mA | VCC = 3.3 V ± 5% | 6 |
| PECL Output HIGH Voltage (FOUT, FOUT, TEST) | VOH | 2.155 | | 2.405 | V | VCC = 3.3 V (Notes 2, 3) | 6 |
| PECL Output LOW Voltage (FOUT, FOUT, TEST) | VOL | 1.355 | | 1.605 | V | VCC = 3.3 V (Notes 2, 3) | 6 |
| Power Supply Current VCC | ICC | 45 | 58 | 80 | mA | VCC = 3.3 V ± 5% | 6 |
| Power Supply Current PLL_VCC | ICC | 17 | 25 | 30 | mA | PLL_VCC, VCC = 3.3 V ± 5% | 6 |
| Input HIGH Voltage (CMOS/TTL) | VIH | 2 | | | V | VCC = 5.0 V | 6 |
| Input LOW Voltage (CMOS/TTL) | VIL | | | 0.8 | V | VCC = 5.0 V | 6 |
| PECL Output HIGH Voltage (FOUT, FOUT, TEST) | VOH | 3.855 | | 4.105 | V | VCC = 5.0 V (Notes 4, 5) | 6 |
| PECL Output LOW Voltage (FOUT, FOUT, TEST) | VOL | 3.055 | | 3.305 | V | VCC = 5.0 V (Notes 4, 5) | 6 |
| Power Supply Current VCC | ICC | 50 | 60 | 85 | mA | VCC = 5.0 V ± 5% | 6 |
| Power Supply Current PLL_VCC | ICC | 18 | 24 | 30 | mA | PLL_VCC, VCC = 5.0 V ± 5% | 6 |
| Maximum Input Frequency XTAL Oscillator | FMAXI | 10 | | 20 | MHz | XTAL Oscillator | 7 |
| Maximum Output Frequency VCO (Internal) | FMAXO | 400 | | 800 | MHz | VCO (Internal) | 7 |
| Maximum Output Frequency FOUT | FMAXO | 50 | | 800 | MHz | FOUT | 7 |
| Maximum PLL Lock Time | tLOCK | | | 10 | ms | | 7 |
| Period Jitter (RMS) | tjitter(pd) | | | 8 | ps | 50 MHz ≤ fOUT < 100 MHz | 7 |
| Period Jitter (RMS) | tjitter(pd) | | | 5 | ps | 100 MHz ≤ fOUT < 800 MHz | 7 |
| Cycle-to-Cycle Jitter (Peak-to-Peak) | tjitter(cyc-cyc) | -40 | | 40 | ps | 50 MHz ≤ fOUT < 100 MHz | 7 |
| Cycle-to-Cycle Jitter (Peak-to-Peak) | tjitter(cyc-cyc) | -20 | | 20 | ps | 100 MHz ≤ fOUT < 800 MHz | 7 |
| Setup Time S_DATA to S_CLOCK | ts | 20 | | | ns | S_DATA to S_CLOCK | 7 |
| Setup Time S_CLOCK to S_LOAD | ts | 20 | | | ns | S_CLOCK to S_LOAD | 7 |
| Setup Time M, N to P_LOAD | ts | 20 | | | ns | M, N to P_LOAD | 7 |
| Hold Time S_DATA to S_CLOCK | th | 20 | | | ns | S_DATA to S_CLOCK | 7 |
| Hold Time M, N to P_LOAD | th | 20 | | | ns | M, N to P_LOAD | 7 |
| Minimum Pulse Width S_LOAD | tpwMIN | 50 | | | ns | S_LOAD | 7 |
| Minimum Pulse Width P_LOAD | tpwMIN | 50 | | | ns | P_LOAD | 7 |
| Output Duty Cycle | DCO | 47.5 | | 52.5 | % | | 7 |
| Output Rise/Fall | tr, tf | 175 | | 425 | ps | FOUT 20%-80% | 7 |
| Positive Supply (operating range) | VCC | 3.135 | | 5.25 | V | Operating Range | 1 |
| Operating Temperature Range (NBC12430) | TA | 0 | | 70 | °C | NBC12430 | 5 |
| Positive Supply | VCC | | | 6 | V | GND = 0 V | 5 |
| Input Voltage | VI | | | 6 | V | GND = 0 V, VI ≤ VCC | 5 |
| Output Current Continuous | Iout | | | 50 | mA | Continuous | 5 |
| Output Current Surge | Iout | | | 100 | mA | Surge | 5 |
| Storage Temperature Range | Tstg | -65 | | 150 | °C | | 5 |
| Wave Solder Pb-Free | Tsol | | | 265 | °C | <3 sec @ 260°C | 5 |
| Thermal Resistance Junction-to-Ambient LQFP-32 | θJA | | 80 | | °C/W | 0 lfpm, LQFP-32 | 5 |
| Thermal Resistance Junction-to-Ambient LQFP-32 | θJA | | 55 | | °C/W | 500 lfpm, LQFP-32 | 5 |
| Thermal Resistance Junction-to-Case LQFP-32 | θJC | 12 | | 17 | °C/W | Standard Board, LQFP-32 | 5 |
## CAD (KiCad official)
- Symbol: `NBC12430FAR2G`
- Footprint: `Package_QFP:LQFP-32_7x7mm_P0.8mm`
- 3D model: LQFP-32(7x7) (KiCad packages3D, STEP)
- 3D model files: `nbc12430far2g-etched.step` / `nbc12430far2g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `nbc12430far2g.step` / `nbc12430far2g.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/nbc12430far2-d.pdf) (20 pp, sha256 `70e5d372ca49113a`, retrieved 2026-11-02, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/nbc12430far2g-datasheet.pdf)