main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers nbc12430far2g: viewers · Ray
nbc12430far2g-etched.glb Publish 0.1.0 · Ray
nbc12430far2g-etched.step nbc12430far2g: factory component page (tier=mfr) · Ray
nbc12430far2g-hero.glb nbc12430far2g: hero GLB from the etched model (keeps the MPN mark) · Ray
nbc12430far2g-hero.overlay.json Publish 0.1.0 · Ray
nbc12430far2g.glb Publish 0.1.0 · Ray
nbc12430far2g.kicad_mod Publish 0.1.0 · Ray
nbc12430far2g.kicad_sym Publish 0.1.0 · Ray
nbc12430far2g.lbr Publish 0.1.0 · Ray
nbc12430far2g.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 32 pins · Ray

NBC12430FAR2G

onsemi · Clock Generators / Frequency Synthesizers / PLL · LQFP-32(7x7)

NBC12430FAR2G from onsemi, in a LQFP-32(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 S_CLOCK input CMOS/TTL serial clock input with internal pulldown that clocks the serial configuration shift register, sampling S_DATA on the rising edge.
2 S_DATA input CMOS/TTL serial data input with internal pulldown that feeds the serial configuration shift registers.
3 S_LOAD input CMOS/TTL serial latch input with internal pulldown that loads the configuration latches from the shift registers, which are transparent when HIGH and latch on the HIGH-to-LOW transition.
4 PLL_VCC power_in Positive supply for the PLL, connected to +3.3 V or +5.0 V.
5 PLL_VCC power_in Positive supply for the PLL, connected to +3.3 V or +5.0 V.
6 FREF_EXT input CMOS/TTL external PLL reference input with internal pulldown, selected when XTAL_SEL is LOW.
7 XTAL_SEL input CMOS/TTL input with internal pullup that selects the crystal (HIGH) or FREF_EXT (LOW) as the PLL reference.
8 XTAL1 input Crystal oscillator input that forms an oscillator with an external series-resonant crystal.
9 XTAL2 output Crystal oscillator pin that forms an oscillator with an external series-resonant crystal.
10 OE input CMOS/TTL active-HIGH synchronous output enable input with internal pullup; outputs are disabled when LOW.
11 P_LOAD input CMOS/TTL parallel latch input with internal pullup; latches are transparent when LOW and capture M and N inputs on the LOW-to-HIGH transition.
12 M[0] input PLL loop divider LSB input (CMOS/TTL, internal pullup), sampled on the LOW-to-HIGH transition of P_LOAD.
13 M[1] input PLL loop divider input (CMOS/TTL, internal pullup), sampled on the LOW-to-HIGH transition of P_LOAD.
14 M[2] input PLL loop divider input (CMOS/TTL, internal pullup), sampled on the LOW-to-HIGH transition of P_LOAD.
15 M[3] input PLL loop divider input (CMOS/TTL, internal pullup), sampled on the LOW-to-HIGH transition of P_LOAD.
16 N/C unconnected No connection.
17 M[4] input PLL loop divider input (CMOS/TTL, internal pullup), sampled on the LOW-to-HIGH transition of P_LOAD.
18 M[5] input PLL loop divider input (CMOS/TTL, internal pullup), sampled on the LOW-to-HIGH transition of P_LOAD.
19 M[6] input PLL loop divider input (CMOS/TTL, internal pullup), sampled on the LOW-to-HIGH transition of P_LOAD.
20 M[7] input PLL loop divider input (CMOS/TTL, internal pullup), sampled on the LOW-to-HIGH transition of P_LOAD.
21 M[8] input PLL loop divider MSB input (CMOS/TTL, internal pullup), sampled on the LOW-to-HIGH transition of P_LOAD.
22 N[0] input Output divider modulus input (CMOS/TTL, internal pullup), sampled on the LOW-to-HIGH transition of P_LOAD.
23 N[1] input Output divider modulus input (CMOS/TTL, internal pullup), sampled on the LOW-to-HIGH transition of P_LOAD.
24 N/C unconnected No connection.
25 GND power_in Negative supply for the chip, normally connected to ground.
26 TEST output PECL test output whose function is set by the serial configuration bits T[2:0]; must be static for guaranteed jitter specifications.
27 VCC power_in Positive supply for the internal logic and output buffer, connected to +3.3 V or +5.0 V.
28 VCC power_in Positive supply for the internal logic and output buffer, connected to +3.3 V or +5.0 V.
29 GND power_in Negative supply for the chip, normally connected to ground.
30 FOUT̅ output Inverted PECL differential output of the synthesizer, able to drive series terminated 50 ohm lines.
31 FOUT output True PECL differential output of the synthesizer, able to drive series terminated 50 ohm lines.
32 VCC power_in Positive supply for the internal logic and output buffer, connected to +3.3 V or +5.0 V.

Key specifications

Parameter Value
Manufacturer onsemi
Package LQFP-32(7x7)
Category RTC/Clock Chip
Pins 32

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input HIGH Voltage (LVCMOS/LVTTL) VIH 2 V VCC = 3.3 V 6
Input LOW Voltage (LVCMOS/LVTTL) VIL 0.8 V VCC = 3.3 V 6
Input Current IIN 1 mA VCC = 3.3 V ± 5% 6
PECL Output HIGH Voltage (FOUT, FOUT, TEST) VOH 2.155 2.405 V VCC = 3.3 V (Notes 2, 3) 6
PECL Output LOW Voltage (FOUT, FOUT, TEST) VOL 1.355 1.605 V VCC = 3.3 V (Notes 2, 3) 6
Power Supply Current VCC ICC 45 58 80 mA VCC = 3.3 V ± 5% 6
Power Supply Current PLL_VCC ICC 17 25 30 mA PLL_VCC, VCC = 3.3 V ± 5% 6
Input HIGH Voltage (CMOS/TTL) VIH 2 V VCC = 5.0 V 6
Input LOW Voltage (CMOS/TTL) VIL 0.8 V VCC = 5.0 V 6
PECL Output HIGH Voltage (FOUT, FOUT, TEST) VOH 3.855 4.105 V VCC = 5.0 V (Notes 4, 5) 6
PECL Output LOW Voltage (FOUT, FOUT, TEST) VOL 3.055 3.305 V VCC = 5.0 V (Notes 4, 5) 6
Power Supply Current VCC ICC 50 60 85 mA VCC = 5.0 V ± 5% 6
Power Supply Current PLL_VCC ICC 18 24 30 mA PLL_VCC, VCC = 5.0 V ± 5% 6
Maximum Input Frequency XTAL Oscillator FMAXI 10 20 MHz XTAL Oscillator 7
Maximum Output Frequency VCO (Internal) FMAXO 400 800 MHz VCO (Internal) 7
Maximum Output Frequency FOUT FMAXO 50 800 MHz FOUT 7
Maximum PLL Lock Time tLOCK 10 ms 7
Period Jitter (RMS) tjitter(pd) 8 ps 50 MHz ≤ fOUT < 100 MHz 7
Period Jitter (RMS) tjitter(pd) 5 ps 100 MHz ≤ fOUT < 800 MHz 7
Cycle-to-Cycle Jitter (Peak-to-Peak) tjitter(cyc-cyc) -40 40 ps 50 MHz ≤ fOUT < 100 MHz 7
Cycle-to-Cycle Jitter (Peak-to-Peak) tjitter(cyc-cyc) -20 20 ps 100 MHz ≤ fOUT < 800 MHz 7
Setup Time S_DATA to S_CLOCK ts 20 ns S_DATA to S_CLOCK 7
Setup Time S_CLOCK to S_LOAD ts 20 ns S_CLOCK to S_LOAD 7
Setup Time M, N to P_LOAD ts 20 ns M, N to P_LOAD 7
Hold Time S_DATA to S_CLOCK th 20 ns S_DATA to S_CLOCK 7
Hold Time M, N to P_LOAD th 20 ns M, N to P_LOAD 7
Minimum Pulse Width S_LOAD tpwMIN 50 ns S_LOAD 7
Minimum Pulse Width P_LOAD tpwMIN 50 ns P_LOAD 7
Output Duty Cycle DCO 47.5 52.5 % 7
Output Rise/Fall tr, tf 175 425 ps FOUT 20%-80% 7
Positive Supply (operating range) VCC 3.135 5.25 V Operating Range 1
Operating Temperature Range (NBC12430) TA 0 70 °C NBC12430 5
Positive Supply VCC 6 V GND = 0 V 5
Input Voltage VI 6 V GND = 0 V, VI ≤ VCC 5
Output Current Continuous Iout 50 mA Continuous 5
Output Current Surge Iout 100 mA Surge 5
Storage Temperature Range Tstg -65 150 °C 5
Wave Solder Pb-Free Tsol 265 °C <3 sec @ 260°C 5
Thermal Resistance Junction-to-Ambient LQFP-32 θJA 80 °C/W 0 lfpm, LQFP-32 5
Thermal Resistance Junction-to-Ambient LQFP-32 θJA 55 °C/W 500 lfpm, LQFP-32 5
Thermal Resistance Junction-to-Case LQFP-32 θJC 12 17 °C/W Standard Board, LQFP-32 5

CAD (KiCad official)

  • Symbol: NBC12430FAR2G
  • Footprint: Package_QFP:LQFP-32_7x7mm_P0.8mm
  • 3D model: LQFP-32(7x7) (KiCad packages3D, STEP)
  • 3D model files: nbc12430far2g-etched.step / nbc12430far2g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); nbc12430far2g.step / nbc12430far2g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (20 pp, sha256 70e5d372ca49113a, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF