main
Ray
Publish 0.1.0
191be32
NB3N206SDR2G
onsemi · Clock Buffers, Drivers · SOIC-8
NB3N206SDR2G from onsemi, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | R | output | LVCMOS receiver output pin, high impedance when RE is HIGH or open. |
| 2 | RE | input | LVCMOS receiver enable input (LOW = active, HIGH = high-Z output), defaults HIGH when open. |
| 3 | DE | input | LVCMOS driver enable input (LOW = high-Z output, HIGH = active), defaults LOW when open. |
| 4 | D | input | LVCMOS driver input pin. |
| 5 | GND | power_in | Ground supply pin that must be connected to guarantee proper operation. |
| 6 | A | bidirectional | M-LVDS transceiver true input/output pin, with bus voltage range of -1.4 V to 3.8 V. |
| 7 | B | bidirectional | M-LVDS transceiver inverting input/output pin, with bus voltage range of -1.4 V to 3.8 V. |
| 8 | VCC | power_in | Power supply pin (3.0 to 3.6 V) that must be connected to guarantee proper operation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOIC-8 |
| Category | Clock and Timing |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VCC | -0.5 | 4 | V | 4 | ||
| Input Voltage D, DE, RE | VIN | -0.5 | 4 | V | D, DE, RE | 4 | |
| Input Voltage A, B | VIN | -1.8 | 4 | V | A, B (201, 206) | 4 | |
| Output Voltage R | IOUT | -0.3 | 4 | V | R | 4 | |
| Output Voltage A, B | IOUT | -1.8 | 4 | V | A, B | 4 | |
| Operating Temperature Range, Industrial | TA | -40 | 85 | °C | 4 | ||
| Storage Temperature Range | Tstg | -65 | 150 | °C | 4 | ||
| Thermal Resistance Junction-to-Ambient | θJA | 190 | °C/W | SOIC-8, 0 lfpm | 4 | ||
| Thermal Resistance Junction-to-Ambient | θJA | 130 | °C/W | SOIC-8, 500 lfpm | 4 | ||
| Thermal Resistance Junction-to-Case | θJC | 41 | 44 | °C/W | SOIC-8, 2S2P board | 4 | |
| Wave Solder | Tsol | 265 | °C | 4 | |||
| Power Dissipation | PD | 725 | mW | TA = 25°C | 4 | ||
| Power Dissipation | PD | 377 | mW | TA = 85°C | 4 | ||
| Supply Voltage (operating) | VCC | 3 | 3.3 | 3.6 | V | VCC = 3.3 ±10% | 5 |
| Input HIGH Voltage | VIH | 2 | V | Max printed as VCC | 5 | ||
| Input LOW Voltage | VIL | 0.8 | V | Min printed as GND | 5 | ||
| Voltage at any bus terminal | VBUS | -1.4 | 3.8 | V | VA, VB, VY or VZ | 5 | |
| Differential output voltage magnitude | /VAB/ | 480 | 650 | mV | see Figure 4 | 5 | |
| Change in differential output voltage magnitude | /VAB/ | -50 | 50 | mV | between logic states, Figure 4 | 5 | |
| Steady state common mode output voltage | VOS(SS) | 0.8 | 1.2 | V | see Figure 5 | 5 | |
| Change in steady state common mode output voltage | VOS(SS) | -50 | 50 | mV | between logic states, Figure 5 | 5 | |
| Peak-to-peak common-mode output voltage | VOS(PP) | 150 | mV | see Figure 5 | 5 | ||
| Max steady-state open-circuit output voltage | VAOC | 0 | 2.4 | V | see Figure 9 | 5 | |
| High-level input current (D, DE) | IIH | 0 | 10 | uA | VIH = 2 V | 5 | |
| Low-level input current (D, DE) | IIL | 0 | 10 | uA | VIL = 0.8 V | 5 | |
| Differential short-circuit output current magnitude | /IOS/ | 24 | mA | see Figure 6 | 5 | ||
| High-impedance state output current (driver) | IOZ | -15 | 10 | uA | -1.4 V ≤ (VA or VB) ≤ 3.8 V, other output at 1.2 V | 5 | |
| Power-off output current | IO(OFF) | -10 | 10 | uA | 0 V ≤ VCC ≤ 1.5 V, -1.4 V ≤ (VA or VB) ≤ 3.8 V, other output at 1.2 V | 5 | |
| High-level output voltage (receiver) | VOH | 2.4 | V | IOH = -8 mA | 5 | ||
| Low-level output voltage (receiver) | VOL | 0.4 | V | IOL = 8 mA | 5 | ||
| RE High-level input current | IIH | -10 | 0 | uA | VIH = 2 V | 5 | |
| RE Low-level input current | IIL | -10 | 0 | uA | VIL = 0.8 V | 5 | |
| High-impedance state output current (receiver) | IOZ | -10 | 15 | uA | VO = 0 V or 3.6 V | 5 | |
| Input Capacitance Balance | CA/B | 99 | 101 | % | CA/CB | 5 | |
| Transceiver Input Capacitance, driver disabled | CA | 5 | pF | VA = 0.4 sin(30E6πt) + 0.5 V; VB = 1.2 V | 6 | ||
| Transceiver Differential Input Capacitance, driver disabled | CAB | 3 | pF | VB = 1.2 V | 6 | ||
| Transceiver Input Capacitance Balance, driver disabled | CA/B | 99 | 101 | % | CA/CB | 6 | |
| Differential Input Current, driver disabled | IAB | -4 | 4 | uA | VA = VB, -1.4 ≤ VA ≤ 3.8 V | 6 | |
| Differential Input Current, power off | IAB(OFF) | -4 | 4 | uA | VA = VB, 0 ≤ VCC ≤ 1.5 V, -1.4 ≤ VA ≤ 3.8 V | 6 | |
| Driver Propagation Delay | tPLH / tPHL | 1 | 1.5 | 2.4 | ns | See Figure 7 | 6 |
| Driver Disable Time | tPHZ / tPLZ | 7 | ns | See Figure 8 | 6 | ||
| Driver Enable Time | tPZH / tPZL | 7 | ns | See Figure 8 | 6 | ||
| Driver Pulse Skew | tSK(P) | 0 | 100 | ps | See Figure 7 | 6 | |
| Driver Device to Device Skew | tSK(PP) | 1 | ns | See Figure 7 | 6 | ||
| Receiver Propagation Delay | tPLH / tPHL | 2 | 4 | 6 | ns | See Figure 12 | 7 |
| Receiver Disable Time | tPHZ / tPLZ | 10 | ns | See Figure 13 | 7 | ||
| Receiver Enable Time | tPZH / tPZL | 15 | ns | See Figure 13 | 7 | ||
| Receiver Device to Device Skew | tSK(PP) | 1 | ns | CL = 5 pF, See Figure 12 | 7 | ||
| Receiver Differential Output rise and fall times | tr / tf | 1 | 2.3 | ns | CL = 15 pF, See Figure 14 | 7 | |
| Input Capacitance (receiver) | CA / CB | 3 | pF | VI = 0.4 sin(30E6πt) + 0.5 V, other outputs at 1.2 V | 5 | ||
| Differential Input Capacitance (receiver) | CAB | 2.5 | pF | VAB = 0.4 sin(30E6πt) V, other outputs at 1.2 V | 5 |
CAD (KiCad official)
- Symbol:
NB3N206SDR2G - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
nb3n206sdr2g-etched.step/nb3n206sdr2g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);nb3n206sdr2g.step/nb3n206sdr2g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (21 pp, sha256
550e121c1a26152a, retrieved 2026-11-20) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# NB3N206SDR2G
**onsemi** · Clock Buffers, Drivers · SOIC-8
NB3N206SDR2G from onsemi, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | R | output | LVCMOS receiver output pin, high impedance when RE is HIGH or open. |
| 2 | RE | input | LVCMOS receiver enable input (LOW = active, HIGH = high-Z output), defaults HIGH when open. |
| 3 | DE | input | LVCMOS driver enable input (LOW = high-Z output, HIGH = active), defaults LOW when open. |
| 4 | D | input | LVCMOS driver input pin. |
| 5 | GND | power_in | Ground supply pin that must be connected to guarantee proper operation. |
| 6 | A | bidirectional | M-LVDS transceiver true input/output pin, with bus voltage range of -1.4 V to 3.8 V. |
| 7 | B | bidirectional | M-LVDS transceiver inverting input/output pin, with bus voltage range of -1.4 V to 3.8 V. |
| 8 | VCC | power_in | Power supply pin (3.0 to 3.6 V) that must be connected to guarantee proper operation. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOIC-8 |
| Category | Clock and Timing |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VCC | -0.5 | | 4 | V | | 4 |
| Input Voltage D, DE, RE | VIN | -0.5 | | 4 | V | D, DE, RE | 4 |
| Input Voltage A, B | VIN | -1.8 | | 4 | V | A, B (201, 206) | 4 |
| Output Voltage R | IOUT | -0.3 | | 4 | V | R | 4 |
| Output Voltage A, B | IOUT | -1.8 | | 4 | V | A, B | 4 |
| Operating Temperature Range, Industrial | TA | -40 | | 85 | °C | | 4 |
| Storage Temperature Range | Tstg | -65 | | 150 | °C | | 4 |
| Thermal Resistance Junction-to-Ambient | θJA | | 190 | | °C/W | SOIC-8, 0 lfpm | 4 |
| Thermal Resistance Junction-to-Ambient | θJA | | 130 | | °C/W | SOIC-8, 500 lfpm | 4 |
| Thermal Resistance Junction-to-Case | θJC | 41 | | 44 | °C/W | SOIC-8, 2S2P board | 4 |
| Wave Solder | Tsol | | | 265 | °C | | 4 |
| Power Dissipation | PD | | | 725 | mW | TA = 25°C | 4 |
| Power Dissipation | PD | | | 377 | mW | TA = 85°C | 4 |
| Supply Voltage (operating) | VCC | 3 | 3.3 | 3.6 | V | VCC = 3.3 ±10% | 5 |
| Input HIGH Voltage | VIH | 2 | | | V | Max printed as VCC | 5 |
| Input LOW Voltage | VIL | | | 0.8 | V | Min printed as GND | 5 |
| Voltage at any bus terminal | VBUS | -1.4 | | 3.8 | V | VA, VB, VY or VZ | 5 |
| Differential output voltage magnitude | /VAB/ | 480 | | 650 | mV | see Figure 4 | 5 |
| Change in differential output voltage magnitude | /VAB/ | -50 | | 50 | mV | between logic states, Figure 4 | 5 |
| Steady state common mode output voltage | VOS(SS) | 0.8 | | 1.2 | V | see Figure 5 | 5 |
| Change in steady state common mode output voltage | VOS(SS) | -50 | | 50 | mV | between logic states, Figure 5 | 5 |
| Peak-to-peak common-mode output voltage | VOS(PP) | | | 150 | mV | see Figure 5 | 5 |
| Max steady-state open-circuit output voltage | VAOC | 0 | | 2.4 | V | see Figure 9 | 5 |
| High-level input current (D, DE) | IIH | 0 | | 10 | uA | VIH = 2 V | 5 |
| Low-level input current (D, DE) | IIL | 0 | | 10 | uA | VIL = 0.8 V | 5 |
| Differential short-circuit output current magnitude | /IOS/ | | | 24 | mA | see Figure 6 | 5 |
| High-impedance state output current (driver) | IOZ | -15 | | 10 | uA | -1.4 V ≤ (VA or VB) ≤ 3.8 V, other output at 1.2 V | 5 |
| Power-off output current | IO(OFF) | -10 | | 10 | uA | 0 V ≤ VCC ≤ 1.5 V, -1.4 V ≤ (VA or VB) ≤ 3.8 V, other output at 1.2 V | 5 |
| High-level output voltage (receiver) | VOH | 2.4 | | | V | IOH = -8 mA | 5 |
| Low-level output voltage (receiver) | VOL | | | 0.4 | V | IOL = 8 mA | 5 |
| RE High-level input current | IIH | -10 | | 0 | uA | VIH = 2 V | 5 |
| RE Low-level input current | IIL | -10 | | 0 | uA | VIL = 0.8 V | 5 |
| High-impedance state output current (receiver) | IOZ | -10 | | 15 | uA | VO = 0 V or 3.6 V | 5 |
| Input Capacitance Balance | CA/B | 99 | | 101 | % | CA/CB | 5 |
| Transceiver Input Capacitance, driver disabled | CA | | | 5 | pF | VA = 0.4 sin(30E6πt) + 0.5 V; VB = 1.2 V | 6 |
| Transceiver Differential Input Capacitance, driver disabled | CAB | | | 3 | pF | VB = 1.2 V | 6 |
| Transceiver Input Capacitance Balance, driver disabled | CA/B | 99 | | 101 | % | CA/CB | 6 |
| Differential Input Current, driver disabled | IAB | -4 | | 4 | uA | VA = VB, -1.4 ≤ VA ≤ 3.8 V | 6 |
| Differential Input Current, power off | IAB(OFF) | -4 | | 4 | uA | VA = VB, 0 ≤ VCC ≤ 1.5 V, -1.4 ≤ VA ≤ 3.8 V | 6 |
| Driver Propagation Delay | tPLH / tPHL | 1 | 1.5 | 2.4 | ns | See Figure 7 | 6 |
| Driver Disable Time | tPHZ / tPLZ | | | 7 | ns | See Figure 8 | 6 |
| Driver Enable Time | tPZH / tPZL | | | 7 | ns | See Figure 8 | 6 |
| Driver Pulse Skew | tSK(P) | 0 | | 100 | ps | See Figure 7 | 6 |
| Driver Device to Device Skew | tSK(PP) | | | 1 | ns | See Figure 7 | 6 |
| Receiver Propagation Delay | tPLH / tPHL | 2 | 4 | 6 | ns | See Figure 12 | 7 |
| Receiver Disable Time | tPHZ / tPLZ | | | 10 | ns | See Figure 13 | 7 |
| Receiver Enable Time | tPZH / tPZL | | | 15 | ns | See Figure 13 | 7 |
| Receiver Device to Device Skew | tSK(PP) | | | 1 | ns | CL = 5 pF, See Figure 12 | 7 |
| Receiver Differential Output rise and fall times | tr / tf | 1 | 2.3 | | ns | CL = 15 pF, See Figure 14 | 7 |
| Input Capacitance (receiver) | CA / CB | | | 3 | pF | VI = 0.4 sin(30E6πt) + 0.5 V, other outputs at 1.2 V | 5 |
| Differential Input Capacitance (receiver) | CAB | | | 2.5 | pF | VAB = 0.4 sin(30E6πt) V, other outputs at 1.2 V | 5 |
## CAD (KiCad official)
- Symbol: `NB3N206SDR2G`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `nb3n206sdr2g-etched.step` / `nb3n206sdr2g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `nb3n206sdr2g.step` / `nb3n206sdr2g.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/nb3n206s-d.pdf) (21 pp, sha256 `550e121c1a26152a`, retrieved 2026-11-20)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/nb3n206sdr2g-datasheet.pdf)