Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

NB3N206SDR2G

onsemi · Clock Buffers, Drivers · SOIC-8

NB3N206SDR2G from onsemi, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 R output LVCMOS receiver output pin, high impedance when RE is HIGH or open.
2 RE input LVCMOS receiver enable input (LOW = active, HIGH = high-Z output), defaults HIGH when open.
3 DE input LVCMOS driver enable input (LOW = high-Z output, HIGH = active), defaults LOW when open.
4 D input LVCMOS driver input pin.
5 GND power_in Ground supply pin that must be connected to guarantee proper operation.
6 A bidirectional M-LVDS transceiver true input/output pin, with bus voltage range of -1.4 V to 3.8 V.
7 B bidirectional M-LVDS transceiver inverting input/output pin, with bus voltage range of -1.4 V to 3.8 V.
8 VCC power_in Power supply pin (3.0 to 3.6 V) that must be connected to guarantee proper operation.

Key specifications

Parameter Value
Manufacturer onsemi
Package SOIC-8
Category Clock and Timing
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VCC -0.5 4 V 4
Input Voltage D, DE, RE VIN -0.5 4 V D, DE, RE 4
Input Voltage A, B VIN -1.8 4 V A, B (201, 206) 4
Output Voltage R IOUT -0.3 4 V R 4
Output Voltage A, B IOUT -1.8 4 V A, B 4
Operating Temperature Range, Industrial TA -40 85 °C 4
Storage Temperature Range Tstg -65 150 °C 4
Thermal Resistance Junction-to-Ambient θJA 190 °C/W SOIC-8, 0 lfpm 4
Thermal Resistance Junction-to-Ambient θJA 130 °C/W SOIC-8, 500 lfpm 4
Thermal Resistance Junction-to-Case θJC 41 44 °C/W SOIC-8, 2S2P board 4
Wave Solder Tsol 265 °C 4
Power Dissipation PD 725 mW TA = 25°C 4
Power Dissipation PD 377 mW TA = 85°C 4
Supply Voltage (operating) VCC 3 3.3 3.6 V VCC = 3.3 ±10% 5
Input HIGH Voltage VIH 2 V Max printed as VCC 5
Input LOW Voltage VIL 0.8 V Min printed as GND 5
Voltage at any bus terminal VBUS -1.4 3.8 V VA, VB, VY or VZ 5
Differential output voltage magnitude /VAB/ 480 650 mV see Figure 4 5
Change in differential output voltage magnitude /VAB/ -50 50 mV between logic states, Figure 4 5
Steady state common mode output voltage VOS(SS) 0.8 1.2 V see Figure 5 5
Change in steady state common mode output voltage VOS(SS) -50 50 mV between logic states, Figure 5 5
Peak-to-peak common-mode output voltage VOS(PP) 150 mV see Figure 5 5
Max steady-state open-circuit output voltage VAOC 0 2.4 V see Figure 9 5
High-level input current (D, DE) IIH 0 10 uA VIH = 2 V 5
Low-level input current (D, DE) IIL 0 10 uA VIL = 0.8 V 5
Differential short-circuit output current magnitude /IOS/ 24 mA see Figure 6 5
High-impedance state output current (driver) IOZ -15 10 uA -1.4 V ≤ (VA or VB) ≤ 3.8 V, other output at 1.2 V 5
Power-off output current IO(OFF) -10 10 uA 0 V ≤ VCC ≤ 1.5 V, -1.4 V ≤ (VA or VB) ≤ 3.8 V, other output at 1.2 V 5
High-level output voltage (receiver) VOH 2.4 V IOH = -8 mA 5
Low-level output voltage (receiver) VOL 0.4 V IOL = 8 mA 5
RE High-level input current IIH -10 0 uA VIH = 2 V 5
RE Low-level input current IIL -10 0 uA VIL = 0.8 V 5
High-impedance state output current (receiver) IOZ -10 15 uA VO = 0 V or 3.6 V 5
Input Capacitance Balance CA/B 99 101 % CA/CB 5
Transceiver Input Capacitance, driver disabled CA 5 pF VA = 0.4 sin(30E6πt) + 0.5 V; VB = 1.2 V 6
Transceiver Differential Input Capacitance, driver disabled CAB 3 pF VB = 1.2 V 6
Transceiver Input Capacitance Balance, driver disabled CA/B 99 101 % CA/CB 6
Differential Input Current, driver disabled IAB -4 4 uA VA = VB, -1.4 ≤ VA ≤ 3.8 V 6
Differential Input Current, power off IAB(OFF) -4 4 uA VA = VB, 0 ≤ VCC ≤ 1.5 V, -1.4 ≤ VA ≤ 3.8 V 6
Driver Propagation Delay tPLH / tPHL 1 1.5 2.4 ns See Figure 7 6
Driver Disable Time tPHZ / tPLZ 7 ns See Figure 8 6
Driver Enable Time tPZH / tPZL 7 ns See Figure 8 6
Driver Pulse Skew tSK(P) 0 100 ps See Figure 7 6
Driver Device to Device Skew tSK(PP) 1 ns See Figure 7 6
Receiver Propagation Delay tPLH / tPHL 2 4 6 ns See Figure 12 7
Receiver Disable Time tPHZ / tPLZ 10 ns See Figure 13 7
Receiver Enable Time tPZH / tPZL 15 ns See Figure 13 7
Receiver Device to Device Skew tSK(PP) 1 ns CL = 5 pF, See Figure 12 7
Receiver Differential Output rise and fall times tr / tf 1 2.3 ns CL = 15 pF, See Figure 14 7
Input Capacitance (receiver) CA / CB 3 pF VI = 0.4 sin(30E6πt) + 0.5 V, other outputs at 1.2 V 5
Differential Input Capacitance (receiver) CAB 2.5 pF VAB = 0.4 sin(30E6πt) V, other outputs at 1.2 V 5

CAD (KiCad official)

  • Symbol: NB3N206SDR2G
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: nb3n206sdr2g-etched.step / nb3n206sdr2g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); nb3n206sdr2g.step / nb3n206sdr2g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (21 pp, sha256 550e121c1a26152a, retrieved 2026-11-20)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF