main
Ray Publish 0.1.0 14bab8c
{
  "slug": "nb3l202kmng",
  "version": "0.1.0",
  "type": "component",
  "description": "onsemi Clock Buffers, Drivers, QFN-16-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "clock and timing",
    "nb3l202kmng",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "nb3l202kmng.kicad_sym",
    "nb3l202kmng.kicad_mod",
    "nb3l202kmng.glb",
    "nb3l202kmng.step",
    "nb3l202kmng.lbr",
    "docs/hero.png",
    "docs/nb3l202kmng-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "nb3l202kmng-hero.glb",
    "nb3l202kmng-hero.overlay.json",
    "nb3l202kmng-etched.glb"
  ],
  "component": {
    "mpn": "NB3L202KMNG",
    "manufacturer": "onsemi",
    "package": "QFN-16-EP(3x3)",
    "pin_count": 17,
    "category": "Clock and Timing",
    "subcategory": "Clock Buffers, Drivers",
    "datasheet": "https://www.onsemi.com/pdf/datasheet/nb3l202kmn-d.pdf",
    "parts": {
      "symbol": "nb3l202kmng.kicad_sym",
      "footprint": "nb3l202kmng.kicad_mod",
      "model_3d": "nb3l202kmng-hero.glb",
      "model_3d_plain": "nb3l202kmng-etched.glb",
      "model_3d_step": "nb3l202kmng-etched.step",
      "model_3d_step_plain": "nb3l202kmng.step",
      "lbr": "nb3l202kmng.lbr"
    },
    "distributor_links": {
      "lcsc": "C603349",
      "digikey": "NB3L202KMNGOS-ND",
      "mouser": "863-NB3L202KMNG"
    },
    "distributor_check": {
      "checked_at": "2026-10-28T21:04:00Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "NB3L202KMNGOS-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "863-NB3L202KMNG",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the device."
      },
      {
        "number": "2",
        "name": "CLK_IN",
        "type": "input",
        "description": "Differential true clock input; accepts differential LVPECL, LVDS and HCSL, and single-ended LVPECL, HCSL, LVCMOS or LVTTL levels with a proper external Vth reference, operating up to 350 MHz."
      },
      {
        "number": "3",
        "name": "CLK_IN#",
        "type": "input",
        "description": "Differential complementary clock input; receives the Vth reference when the device is driven single-ended."
      },
      {
        "number": "4",
        "name": "VDD",
        "type": "power_in",
        "description": "Core power supply: 3.3 V ±10% (2.970 V to 3.630 V) or 2.5 V ±5% (2.375 V to 2.625 V)."
      },
      {
        "number": "5",
        "name": "GND_O",
        "type": "power_in",
        "description": "Ground for the outputs."
      },
      {
        "number": "6",
        "name": "DIF_1#",
        "type": "output",
        "description": "0.7 V differential HCSL complementary output; output current is set by the IREF resistor and the output is tri-stated (pulled low by termination) when OE1# is high."
      },
      {
        "number": "7",
        "name": "DIF_1",
        "type": "output",
        "description": "0.7 V differential HCSL true output; output current is set by the IREF resistor and the output is tri-stated (pulled low by termination) when OE1# is high."
      },
      {
        "number": "8",
        "name": "VDD_O",
        "type": "power_in",
        "description": "Output supply: 3.3 V ±10% (2.970 V to 3.630 V) or 2.5 V ±5% (2.375 V to 2.625 V)."
      },
      {
        "number": "9",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the device."
      },
      {
        "number": "10",
        "name": "IREF",
        "type": "input",
        "description": "Precision reference resistor to GND sets the differential output current: 475 Ω 1% for a 100 Ω trace with 50 Ω termination, or 412 Ω 1% for an 85 Ω trace with 43 Ω termination."
      },
      {
        "number": "11",
        "name": "OE0#",
        "type": "input",
        "description": "LVTTL/LVCMOS active-low output enable for DIF_0/DIF_0#: 0 enables the outputs and 1 disables them; internal pull-down."
      },
      {
        "number": "12",
        "name": "OE1#",
        "type": "input",
        "description": "LVTTL/LVCMOS active-low output enable for DIF_1/DIF_1#: 0 enables the outputs and 1 disables them; internal pull-down."
      },
      {
        "number": "13",
        "name": "VDD_O",
        "type": "power_in",
        "description": "Output supply: 3.3 V ±10% (2.970 V to 3.630 V) or 2.5 V ±5% (2.375 V to 2.625 V)."
      },
      {
        "number": "14",
        "name": "DIF_0",
        "type": "output",
        "description": "0.7 V differential HCSL true output; output current is set by the IREF resistor and the output is tri-stated (pulled low by termination) when OE0# is high."
      },
      {
        "number": "15",
        "name": "DIF_0#",
        "type": "output",
        "description": "0.7 V differential HCSL complementary output; output current is set by the IREF resistor and the output is tri-stated (pulled low by termination) when OE0# is high."
      },
      {
        "number": "16",
        "name": "GND_O",
        "type": "power_in",
        "description": "Ground for the outputs."
      },
      {
        "number": "17",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet labels the exposed pad 'EP' rather than a numeric pin number; it is listed as 'EP' her; The datasheet lists IREF as type 'I' (input) but it is a resistor connection to GND that sets output",
          "exposed pad 17 added from the footprint",
          "dropped thermal pad ['EP'] absent from footprint"
        ],
        "pages_sent": 14,
        "cost_usd": 0.0652,
        "at": "2026-10-28T21:03:26"
      },
      "datasheet": {
        "url": "https://www.onsemi.com/pdf/datasheet/nb3l202kmn-d.pdf",
        "pages": 14,
        "sha256": "7f66f71b6e1e686b",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 17,
        "described": 17,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "nb3l202kmng.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          3.0,
          0.785
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "3eb81ffac423a66cdcfead8efe56401da171edaf1f2257049aad7b2d3900f6c8",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "nb3l202kmng-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          3.0,
          0.785
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "19e1589ab66755721b74f80cd3baa99d2b037a6ac509b9090c30b14fd9d9bfc2",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "485FM",
      "source_page": 14,
      "D": {
        "nom_mm": 3.0,
        "range_mm": [
          null,
          null
        ]
      },
      "E1": {
        "nom_mm": 3.0,
        "range_mm": [
          null,
          null
        ]
      },
      "e": {
        "nom_mm": 0.5,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 0.9,
        "range_mm": [
          0.8,
          1.0
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "nb3l202kmng.step",
        "verdict": "PASS",
        "reasons": [
          "height within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}